Open Access

Ivan Rekun, Thomas Seifert, Roland Jörg

• Components of rocket engines as actively cooled combustion chambers must withstand high pressure as well as severe and complex thermal transients. While the thermal transients result in temperature gradients and, thus, in constraint thermal strains, the pressure load induces mean stresses. To assess the mechanical behaviour of such components during design via finite-element calculations,Components of rocket engines as actively cooled combustion chambers must withstand high pressure as well as severe and complex thermal transients. While the thermal transients result in temperature gradients and, thus, in constraint thermal strains, the pressure load induces mean stresses. To assess the mechanical behaviour of such components during design via finite-element calculations, constitutive models are necessary that describe the time- and temperature-dependent plasticity of the material appropriately. Advanced models account for viscoplastic deformations including isotropic and kinematic hardening, recovery and ratcheting. However, the models contain a relatively large number of temperature-dependent material properties that must be determined on the basis of data of material tests. The determination of the properties is a non-trivial task because it is not clear which loading history must be applied in the tests for a certain material to obtain stable and robust (i.e. objective) material properties. Consequently, the determined properties are depending on the underlying loading history in the tests as well as on the experience and valuation of the person that determined the properties. This results in uncertainties during the assessment of the components that must be faced with conservative designs leading to negative consequences in terms of mass and costs. It is the aim of this work funded by the European Space Agency ESA to derive a procedure to determine stable and robust material properties of an advanced viscoplastic constitutive model for aerospace materials. To this end, a special loading history is applied in isothermal material tests conducted with copper at different temperatures in the temperature range from 300 to 700 K. To determine the material properties and to assess stability and robustness methods for numerical optimization as well as analytical and statistical methods are used. The determined material properties are validated on the basis of results of thermomechanical material tests also conducted in the temperature range from 300 to 700 K.…