Experimental investigation of the time and temperature dependent growth of fatigue cracks in Inconel 718 and mechanism based lifetime prediction
- The following contribution deals with the growth of cracks in low-cycle fatigue (LCF) and thermomechanical fatigue (TMF) tested specimens of Inconel 718 measured by using the replica method. The specimens are loaded with different strain rates. The material shows a significantly higher crack growth rate if the strain rate is decreased. Electron backscatter diffraction (EBSD) is adopted to identifyThe following contribution deals with the growth of cracks in low-cycle fatigue (LCF) and thermomechanical fatigue (TMF) tested specimens of Inconel 718 measured by using the replica method. The specimens are loaded with different strain rates. The material shows a significantly higher crack growth rate if the strain rate is decreased. Electron backscatter diffraction (EBSD) is adopted to identify the failure mechanism and the misorientation relationship of failed grain boundaries in secondary cracks. The analyzed cracks propagated mainly transgranular but also intergranular failure can be observed in some areas. It is found that grain boundaries with coincidence site lattice (CSL) boundary structure are generally less susceptible for intergranular failure than grain boundaries with random misorientation. For modeling the experimentally identified crack behavior an existing model for fatigue crack growth based on the mechanism of time dependent elastic–plastic crack tip blunting is enhanced to describe environmental effects based on the mechanism of oxygen diffusion at the crack tip. For the diffusion process the temperature dependent parabolic diffusion law is assumed. As a result, the time dependent cyclic crack tip opening displacement (DCTOD) is used as representative value to describe both mechanisms. Thus, most
of the included model parameters characterize the deformation behavior of the material and can be determined by independent material tests. With the determined material properties, the proposed model describes the experimentally measured crack growth curves very well. The model is validated based on predictions of the number of cycles to failure of LCF as well as in-phase and out-of-phase TMF tests in the temperature range between room temperature and 650 °C.…
Document Type: | Article (reviewed) |
---|---|
Zitierlink: | https://opus.hs-offenburg.de/2546 | Bibliografische Angaben |
Title (English): | Experimental investigation of the time and temperature dependent growth of fatigue cracks in Inconel 718 and mechanism based lifetime prediction |
Author: | Michael Schlesinger, Thomas SeifertStaff MemberORCiDGND, Johannes Preussner |
Year of Publication: | 2017 |
Date of first Publication: | 2016/12/10 |
First Page: | 242 |
Last Page: | 249 |
Parent Title (English): | International Journal of Fatigue |
Volume: | 99 |
Issue: | Part 2 |
ISSN: | 0142-1123 |
DOI: | https://doi.org/10.1016/j.ijfatigue.2016.12.015 |
URL: | http://www.sciencedirect.com/science/article/pii/S0142112316304224 |
Language: | English | Inhaltliche Informationen |
Institutes: | Fakultät Maschinenbau und Verfahrenstechnik (M+V) |
Institutes: | Bibliografie |
DDC classes: | 600 Technik, Medizin, angewandte Wissenschaften |
GND Keyword: | Ermüdung; Oxidation; Rissausbreitung; Schädigung | Formale Angaben |
Licence (German): | ![]() |