Open Access

Propagation of acoustic waves is considered in a system consisting of two stiff quarter-spaces connected by a planar soft layer. The two quarter-spaces and the layer form a half-space with a planar surface. In a numerical study, surface waves have been found and analyzed in this system with displacements that are localized not only at the surface, but also in the soft layer. In addition to the semi-analytical finite element method, an alternative approach based on an expansion of the displacement field in a double series of Laguerre functions and Legendre polynomials has been applied. It is shown that a number of branches of the mode spectrum can be interpreted and remarkably well described by perturbation theory, where the zero-order modes are the wedge waves guided at a rectangular edge of the stiff quarter-spaces or waves guided at the edge of a soft plate with rigid surfaces. For elastic moduli and densities corresponding to the material combination PMMA–silicone–PMMA, at least one of the branches in the dispersion relation of surface waves trapped in the soft layer exhibits a zero-group velocity point. Potential applications of these 1D guided surface waves in non-destructive evaluation are discussed.

In dieser Arbeit wird ein historischer Fallbericht des bis heute weit über seine Landesgrenzen bekannten italienischen Kriminalanthropologen Cesare Lombroso (1835–1909) vorgestellt. In diesem Fallbericht wird der berüchtigte und psychisch auffällige Dieb Pietro Bersone mit Hilfe eines sog. Hydrosphygmographen überführt, einem zur damaligen Zeit neuartigen technischen Gerät, das den Puls nicht-invasiv aufzeichnen konnte. Lombroso ist vermutlich einer der ersten, wenn nicht sogar der erste, der durch den Einsatz eines solchen Geräts die Idee zum „Lügendetektor“ vorweggenommen hat. Die vorgestellte Textstelle aus Lombrosos Buch „Neue Fortschritte in den Verbrecherstudien“ ist daher ein besonderes Fundstück auch für die Geschichte der Polygraphie.

Additive manufacturing is a rapidly growing manufacturing process for which many new processes and materials are currently being developed. The biggest advantage is that almost any shape can be produced, while conventional manufacturing methods reach their limits. Furthermore, a lot of material is saved because the part is created in layers and only as much material is used as necessary. In contrast, in the case of machining processes, it is not uncommon for more than half of the material to be removed and disposed of. Recently, new additive manufacturing processes have been on the market that enables the manufacturing of components using the FDM process with fiber reinforcement. This opens up new possibilities for optimizing components in terms of their strength and at the same time increasing sustainability by reducing materials consumption and waste. Within the scope of this work, different types of test specimens are to be designed, manufactured and examined. The test specimens are tensile specimens, which are used both for standardized tensile tests and for examining a practical component from automotive engineering used in student project. This project is a vehicle designed to compete in the Shell Eco-marathon, one of the world’s largest energy efficiency competitions. The aim is to design a vehicle that covers a certain distance with as little fuel as possible. Accordingly, it is desirable to manufacture the components with the lowest possible weight, while still ensuring the required rigidity. To achieve this, the use of fiber-reinforced 3D-printed parts is particularly suitable due to the high rigidity. In particular, the joining technology for connecting conventionally and additively manufactured components is developed. As a result, the economic efficiency was assessed, and guidelines for the design of components and joining elements were created. In addition, it could be shown that the additive manufacturing of the component could be implemented faster and more sustainably than the previous conventional manufacturing.

Time-Sensitive Networking (TSN) is the most promising time-deterministic wired communication approach for industrial applications. To extend TSN to "IEEE 802.11" wireless networks two challenging problems must be solved: synchronization and scheduling. This paper is focused on the first one. Even though a few solutions already meet the required synchronization accuracies, they are built on expensive hardware that is not suited for mass market products. While next Wi-Fi generation might support the required functionalities, this paper proposes a novel method that makes possible high-precision wireless synchronization using commercial low-cost components. With the proposed solution, a standard deviation of synchronization error of less than 500 ns can be achieved for many use cases and system loads on both CPU and network. This performance is comparable to modern wired real-time field busses, which makes the developed method a significant contribution for the extension of the TSN protocol to the wireless domain.

In der vorliegenden Arbeit wurde die von Wilhelm His Sr. angefertigte und im Jahr 1895 publizierte Fotografie des mutmaßlichen Skeletts von Johann Sebastian Bach auf ihre Abbildungsqualität untersucht. Dies erfolgte durch direkte Messungen an einem digitalen Scan der Fotografie. Dabei wurde der von His der Fotografie beigelegte Lineal-Maßstab in mehrere 10-cm-Stücke unterteilt und die Länge dieser Abschnitte im Digitalisat mit dem Messinstrument von Adobe Acrobat ausgemessen. Darüber hinaus wurden die Längen der Femora ermittelt und mit den Maßen verglichen, die 1895 an den tatsächlichen (realen) Knochen ermittelt wurden. In dem Digitalisat entsprachen 190 cm im Lineal 244,48 mm. Der Mittelwert der 19 bestimmten 10-cm-Abschnitte betrug 100,49 mm (Median 100,49 mm, Standardabweichung 0,49 mm). Die historische Femurlänge links betrug 443,5 mm, rechts 451,0 mm. Die im Digitalisat ermittelte Femurlänge betrug links 443,8 mm, rechts 451,1 mm. Zusätzlich wurden die projizierten Centrum-Collum-Diaphysen-Winkel bestimmt. Die Daten lassen den Schluss zu, dass die Oben/unten-Verzerrung sowie die Rechts/links-Verzerrung nicht nennenswert sind und das von His angefertigte Foto mit einer hohen Genauigkeit der Abbildungsqualität und des Linsenapparats der Kamera angefertigt wurde, die es ermöglicht, bestimmte Skelettanteile aussagekräftig zu beurteilen und auszumessen.