Refine
Year of publication
Document Type
- Article (reviewed) (28) (remove)
Is part of the Bibliography
- yes (28) (remove)
Keywords
- Ermüdung (8)
- Plastizität (8)
- Mikrostruktur (5)
- Eisenguss (4)
- Finite-Elemente-Methode (3)
- Materialermüdung (3)
- Simulation (3)
- Thermomechanik (3)
- Bruch (2)
- Crack opening stress (2)
Institute
Open Access
- Closed Access (12)
- Open Access (9)
- Closed (3)
- Gold (2)
In this paper, the J-integral is derived for temperature-dependent elastic–plastic materials described by incremental plasticity. It is implemented using the equivalent domain integral method for assessment of three-dimensional cracks based on results of finite-element calculations. The J-integral considers contributions from inhomogeneous temperature fields and temperature-dependent elastic and plastic material properties as well as from gradients in the plastic strains and the hardening variables. Different energy densities are considered, the Helmholtz free energy and the stress-working density, providing a physical meaning of the J-integral as a fracture criteria for crack growth. Results obtained for a plate with two different crack configurations each loaded by a cool-down thermal shock show domain-independence of the incremental J-integral for different energy densities even for high temperature gradients and significant temperature-dependence of the yield stress and the hardening exponent in the presence of large scale yielding. Hence, the derived J-integral is an appropriate parameter for the assessment of cracks in thermomechanically loaded components.
In this paper, the time- and temperature-dependent cyclic ratchetting plasticity of the nickel-based alloy IN100 is experimentally investigated in strain-controlled experiments in the temperature range from 300 °C to 1050 °C. To this end, uniaxial material tests are performed with complex loading histories designed to activate phenomena as strain rate dependency, stress relaxation as well as the Bauschinger effect, cyclic hardening and softening, ratchetting and recovery from hardening. Plasticity models with different levels of complexity are presented that consider these phenomena, and a strategy is derived to determine the multitude of temperature-dependent material properties of the models in a step-by-step procedure based on sub-sets of experimental data of isothermal experiments. The models and the material properties are validated based on the results of non-isothermal experiments. A good description of the time- and temperature-dependent cyclic ratchetting plasticity of IN100 is obtained for isothermal as well as non-isothermal loading with models including ratchetting terms in the kinematic hardening law and the material properties obtained with the proposed strategy.
In this paper, a temperature-dependent viscoplasticity model is presented that describes thermal and cyclic softening of the hot work steel X38CrMoV5-3 under thermomechanical fatigue loading. The model describes the softening state of the material by evolution equations, the material properties of which can be determined on the basis of a defined experimental program. A kinetic model is employed to capture the effect of coarsening carbides and a new isotropic cyclic softening model is developed that takes history effects during thermomechanical loadings into account. The temperature-dependent material properties of the viscoplasticity model are determined on the basis of experimental data measured in isothermal and thermomechanical fatigue tests for the material X38CrMoV5-3 in the temperature range between 20 and 650 ∘C. The comparison of the model and an existing model for isotropic softening shows an improved description of the softening behavior under thermomechanical fatigue loading. A good overall description of the experimental data is possible with the presented viscoplasticity model, so that it is suited for the assessment of operating loads of hot forging tools.
In this paper, the effect of the polycrystalline microstructure on crack-tip opening displacement and crack closure is investigated for microstructural short plane strain fatigue cracks using the finite-element method. To this end, cracks are introduced in synthetically generated microstructures and the grain properties are described using a single crystal plasticity model with kinematic hardening. Additionally, finite-element calculations without resolved microstructure and von Mises plasticity with kinematic hardening are performed. Fully-reversed strain-controlled cyclic loadings are considered under large-scale yielding conditions as typical for low-cycle fatigue problems. The crack opening stress and the cyclic crack-tip opening displacement are significantly influenced by the local grain structure. While the stabilized crack opening stresses obtained with the microstructure-based finite-element model are in good accordance with the von Mises plasticity results, the differences in the cyclic crack opening displacement are addressed to the asymmetric plastic strain fields in the plastic wake behind the crack-tip of the microstructure-based model. The asymmetric plastic strain fields result in discontinuous and premature contact of the crack flanks.
In this paper, the influence of the material hardening behavior on plasticity-induced fatigue crack closure is investigated for strain-controlled loading and fully plastic, large-scale yielding conditions by means of the finite element method. The strain amplitude and the strain ratio are varied for given Ramberg–Osgood material properties representing materials with different hardening behavior. The results show a pronounced influence of the hardening behavior on crack closure, while no significant effect is found from the considered strain amplitude and strain ratio. The effect of the hardening behavior on the crack opening stress cannot be described by existing crack opening stress equations.
Pure orbital blowout fractures occur within the confines of the internal orbital wall. Restoration of orbital form and volume is paramount to prevent functional and esthetic impairment. The anatomical peculiarity of the orbit has encouraged surgeons to develop implants with customized features to restore its architecture. This has resulted in worldwide clinical demand for patient-specific implants (PSIs) designed to fit precisely in the patient’s unique anatomy. Material extrusion or Fused filament fabrication (FFF) three-dimensional (3D) printing technology has enabled the fabrication of implant-grade polymers such as Polyetheretherketone (PEEK), paving the way for a more sophisticated generation of biomaterials. This study evaluates the FFF 3D printed PEEK orbital mesh customized implants with a metric considering the relevant design, biomechanical, and morphological parameters. The performance of the implants is studied as a function of varying thicknesses and porous design constructs through a finite element (FE) based computational model and a decision matrix based statistical approach. The maximum stress values achieved in our results predict the high durability of the implants, and the maximum deformation values were under one-tenth of a millimeter (mm) domain in all the implant profile configurations. The circular patterned implant (0.9 mm) had the best performance score. The study demonstrates that compounding multi-design computational analysis with 3D printing can be beneficial for the optimal restoration of the orbital floor.
The work focuses on predictive capabilities of fundamental cyclic plasticity and fatigue life models, which can be calibrated using limited amount of experiments as specific ones needed for more advanced models are often absent. The analyses are conducted for the synthetic case of exhaust manifold made from cast iron. The thermal boundary conditions from the forced convection were obtained from the computational fluid dynamics considered as a conjugate heat transfer problem. Two rate-independent and temperature-dependent material models were calibrated for structural analyses. Both were validated with experiments on isothermal and anisothermal levels. Sequential thermal–mechanical finite element simulations were performed. Two fatigue life models were employed. The first was a temperature-dependent strain-based fatigue life criterion calibrated from uniaxial data. The second was a temperature-independent energy-based fatigue life criterion resulting in twice lower life than the strain-based criterion, while none of the plasticity models made a significant difference in that prediction.
Due to higher combustion chamber temperatures and pressures in efficient combustion engines, both the high-cycle and thermomechanical fatigue loads on service life-critical components, such as the cylinder head, are increasing. Material comparisons and analysis of damage behavior are very expensive and time-consuming using component tests. This study therefore develops a test method for cylinder head materials that takes into account the combined loading conditions from the above-mentioned loads and allows realistic temperature transients and gradients on near-component samples. The near-component cylinder head sample represents the failure-critical exhaust valve crosspiece and is tested in a test rig specially designed with the aid of conjugate heat transfer simulations. In the test rig, the sample is subjected to thermal stress by a hot gas burner and to mechanical stress by a high-frequency pulsator. Optical crack detection allows permanent observation of fatigue crack growth and crack closure during the test. Fractographic and metallo-graphic examinations of the fracture areas as well as analyses of the damage patterns show that loads close to engine operation can be set in this way and their influences on the damage can be monitored.
Cyclic micro-bending tests on fcc single crystal Ni-base Alloy 718 cantilevers with different crystal orientations were performed to analyze the influence of activated slip systems on dislocation plasticity, latent hardening and the Bauschinger effect. The investigations indicate that plasticity in single crystal micro-cantilevers is significantly influenced by two phenomena - dislocation interaction and dislocation pile-up at the neutral plane. Both phenomena occur at the same time. Their ratio seems to be determined by the activated slip systems. Slip trace analysis indicates that the activation of only one slip system leads to a strong localization of plasticity to a limited number of parallel slip bands. This results in low dislocation interaction and consequently pronounced pile-ups at the neutral plane. In multi slip orientation, the second slip system leads to activation of significantly more dislocation sources, causing a much earlier and more homogeneous elastic-plastic transition zone. In stress-strain hysteresis loops during bending, pronounced dislocation interaction in multi slip orientation leads to a more pronounced latent hardening. The results suggest that on a microstructural length scale, plasticity behavior is strongly affected by activated slip systems, which determine local dislocation phenomena. Based on the results presented in this paper, a finite element analysis of latent hardening and the Bauschinger effect using a single crystal plasticity model with latent kinematic hardening is presented in Part II.
In this paper, the Bauschinger effect and latent hardening of single crystals are assessed in finite element calculations using a single crystal plasticity model with kinematic hardening. To this end, results of cyclic micro-bending experiments on single crystal Alloy 718 in different crystal orientations (single slip and multi slip) with respect to the loading direction are used to determine the slip system related material properties of the single crystal plasticity model. Two kinematic hardening laws are considered: a kinematic hardening law describing latent hardening and a kinematic hardening law without latent hardening. For the determination of material properties for both hardening laws, a gradient-based optimization method is used. The results show that the different strength levels observed for micro-bending tests on different crystal orientations can only be described with latent kinematic hardening well, whereas the pronounced Bauschinger effect is described well by both kinematic hardening laws. It is concluded that cyclic micro-bending experiments on single crystals using different crystal orientations give an appropriate data base for the determination of the slip system related material properties of the single crystal plasticity model with latent kinematic hardening.