Refine
Document Type
- Conference Proceeding (11)
- Article (reviewed) (4)
Conference Type
- Konferenzartikel (10)
- Konferenz-Abstract (1)
Language
- English (15) (remove)
Is part of the Bibliography
- yes (15) (remove)
Keywords
- energy harvesting (3)
- 3D printing (2)
- Robotics (2)
- vibration harvester (2)
- 3D Printed Force Sensor (1)
- 3D printed (1)
- Artificial Feedback (1)
- Capacitive Liquid Level Sensor (1)
- Cobotik (1)
- Embedded Constantan Wire (1)
Institute
Open Access
- Closed (6)
- Open Access (5)
- Closed Access (4)
- Bronze (1)
- Gold (1)
Printed circuit boards (PCB) are a foundation of electronical devices in modern society. The fabrication of these boards requires various processes and machines. The utilisation of a robot with multiple tools can shorten the process chain compared to screen printing. In this paper a system is presented, which utilises an industrial six axis robot to manufacture
PCBs. The process flow and conversion process of the Gerber format into robot specific commands is presented. The advantages and challenges applying a robot to print circuits are discussed.
Novel approaches for the design of assistive technology controls propose the usage of eye tracking devices such as for smart wheelchairs and robotic arms. The advantages of artificial feedback, especially vibrotactile feedback, as opposed to their use in prostheses, have not been sufficiently explored. Vibrotactile feedback reduces the cognitive load on the visual and auditory channel. It provides tactile sensation, resulting in better use of assistive technologies. In this study the impact of vibration on the precision and accuracy of a head-worn eye tracking device is investigated. The presented system is suitable for further research in the field of artificial feedback. Vibration was perceivable for all participants, yet it does not produce any significant deviations in precision and accuracy.
The ability to change aerodynamic parameters of airfoils during flying can potentially save energy as well as reducing the noise made by the unmanned aerial vehicles (UAV) because of sharp edges of the airfoil and its rudders. In this paper, an approach for the design of an adaptive wing using a multi-material 3D printer is shown. In multi-material 3D printing, up to six different materials can be combined in one component. Thus, the user can determine the mixture and the spatial arrangement of this “digital material” in advance in the pre-processing software. First, the theoretical benefits of adaptive wings are shown, and already existing adaptive wings and concepts are explicated within a literature review. Then the additive manufacturing process using photopolymer jetting and its capabilities to print multiple materials in one part are demonstrated. Within the scope of a case study, an adaptive wing is developed and the necessary steps for the product development and their implementation in CAD are presented. This contribution covers the requirements for different components and sections of an adaptive wing designed for additive manufacturing using multiple materials as well as the single steps of development with its different approaches until the final design of the adaptive wing. The developed wing section is simulated, and qualitative tests in a wind tunnel are carried out with the wing segment. Finally, the additively manufactured wing segment is evaluated under technical and economic aspects.
Various methods of Digital Manufacturing (DM) have been available for the manufacturing of physical architectural models for several years. This paper highlights the advantages of 3D printing for digital manufacturing of detailed architectural models. In particular, the representation of architectural details and textures is treated. Furthermore, two new methods are being developed in order to improve the conditions for the application of digital manufacturing of architectural models.
Architecture models are an essential component of the development process and enable a physical representation of virtual designs. In addition to the conventional methods of model production using the machining of models made of wood, metal, plastic or glass, a number of additive manufacturing processes are now available. These new processes enable the additive manufacturing of architectural models directly from CAAD or BIM data. However, the boundary conditions applicable to the ability to manufacture models with additive manufacturing processes must also be considered. Such conditions include the minimum wall thickness, which depends on the applied additive manufacturing process and the materials used. Moreover, the need for the removal of support structures after the additive manufacturing process must also be considered. In general, a change in the scale of these models is only possible at very high effort. In order to allow these restrictions to be adequately incorporated into the CAAD model, this contribution develops a parametrized CAAD model that allows such boundary conditions to be modified and adapted while complying with the scale. Usability of this new method is illustrated and explained in detail in a case study. In addition, this article addresses the additive manufacturing processes including subsequent post-processing.
Human–robot collaborative applications have been receiving increasing attention in industrial applications. The efficiency of the applications is often quite low compared to traditional robotic applications without human interaction. Especially for applications that use speed and separation monitoring, there is potential to increase the efficiency with a cost-effective and easy to implement method. In this paper, we proposed to add human–machine differentiation to the speed and separation monitoring in human–robot collaborative applications. The formula for the protective separation distance was extended with a variable for the kind of object that approaches the robot. Different sensors for differentiation of human and non-human objects are presented. Thermal cameras are used to take measurements in a proof of concept. Through differentiation of human and non-human objects, it is possible to decrease the protective separation distance between the robot and the object and therefore increase the overall efficiency of the collaborative application.
Avoiding collisions between a robot arm and any obstacle in its path is essential to human-robot collaboration. Multiple systems are available that can detect obstacles in the robot's way prior and subsequent to a collision. The systems work well in different areas surrounding the robot. One area that is difficult to handle is the area that is hidden by the robot arm. This paper focuses on pick and place maneuvers, especially on obstacle detection in between the robot arm and the table that robot is located on. It introduces the use of single pixel time-of-flight sensors to detect obstacles directly from the robot arm. The proposed approach reduces the complexity of the problem by locking axes of the robot that are not needed for the pick and place movement. The comparison of simulated results and laboratory measurements show concordance.
Separation Estimation with Thermal Cameras for Separation Monitoring in Human-Robot Collaboration
(2022)
Human-Robot Collaborative applications have the drawback of being less efficient than their non-collaborative counterparts. One of the main reasons is, that the robot has to slow down when a human being is within the operating space of the robot. There are different approaches on dynamic speed and separation monitoring in human-robot collaborative applications. One approach additionally differentiates between human and non-human objects to increase efficiency in speed and separation monitoring. This paper proposes to estimate the separation distance by measuring the temperature of the approaching object. Measurements show that the measured temperature of a human being decreases with 1 deg C per meter distance from the sensor. This allows an estimation of separation between a robotic system and a human being.
This paper presents the development of a capacitive level sensor for robotics applications, which is designed for measurements of liquid levels during a pouring process. The proposed sensor design applies the advantages of guard electrodes in combination with passive shielding to increase resistance against external influences. This is important for reliable operations in rapidly changing measurement environments, as they occur in the field of robotics. The non-contact type sensor for liquid level measurement is the solution for avoiding contaminations and suit food guidelines. The designed sensor can be utilized in gastronomic applications. Two versions of the sensor were simulated, fabricated, and compared. The first version is based on copper electrodes, and the other type is fully 3D printed with electrodes made of conductive polylactic acid (PLA).