Refine
Year of publication
Document Type
- Article (reviewed) (65) (remove)
Keywords
- Lithiumbatterie (8)
- Haustechnik (5)
- Batterie (3)
- Brennstoffzelle (3)
- Bürohaus (3)
- Energieversorgung (3)
- Algorithmus (2)
- Durchfluss (2)
- Elektrolyt (2)
- Festoxidbrennstoffzelle (2)
Institute
- INES - Institut für Energiesystemtechnik (65) (remove)
This article presents a comparative experimental study of the electrical, structural and chemical properties of large‐format, 180 Ah prismatic lithium iron phosphate (LFP)/graphite lithium‐ion battery cells from two different manufacturers. These cells are particularly used in the field of stationary energy storage such as home‐storage systems. The investigations include (1) cell‐to‐cell performance assessment, for which a total of 28 cells was tested from each manufacturer, (2) electrical charge/discharge characteristics at different currents and ambient temperatures, (3) internal cell geometries, components, and weight analysis after cell opening, (4) microstructural analysis of the electrodes via light microscopy and scanning electron microscopy, (5) chemical analysis of the electrode materials using energy‐dispersive X‐ray spectroscopy, and (6) mathematical analysis of the electrode balances. The combined results give a detailed and comparative insight into the cell characteristics, providing essential information needed for system integration. The study also provides complete and self‐consistent parameter sets for the use in cells models needed for performance prediction or state diagnosis.
Optimisation based economic despatch of real-world complex energy systems demands reduced order and continuously differentiable component models that can represent their part-load behaviour and dynamic responses. A literature study of existing modelling methods and the necessary characteristics the models should meet for their successful application in model predictive control of a polygeneration system are presented. Deriving from that, a rational modelling procedure using engineering principles and assumptions to develop simplified component models is applied. The models are quantitatively and qualitatively evaluated against experimental data and their efficacy for application in a building automation and control architecture is established.
Cooling towers or recoolers are one of the major consumers of electricity in a HVAC plant. The implementation and analysis of advanced control methods in a practical application and its comparison with conventional controllers is necessary to establish a framework for their feasibility especially in the field of decentralised energy systems. A standard industrial controller, a PID and a model based controller were developed and tested in an experimental set-up using market-ready components. The characteristics of these controllers such as settling time, control difference, and frequency of control actions are compared based on the monitoring data. Modern controllers demonstrated clear advantages in terms of energy savings and higher accuracy and a model based controller was easier to set-up than a PID.
Passive hybridization refers to a parallel connection of photovoltaic and battery cells on the direct current level without any active controllers or inverters. We present the first study of a lithium-ion battery cell connected in parallel to a string of four or five serially-connected photovoltaic cells. Experimental investigations were performed using a modified commercial photovoltaic module and a lithium titanate battery pouch cell, representing an overall 41.7 W-peak (photovoltaic)/36.8 W-hour (battery) passive hybrid system. Systematic and detailed monitoring of this system over periods of several days with different load scenarios was carried out. A scaled dynamic synthetic load representing a typical profile of a single-family house was successfully supplied with 100 % self-sufficiency over a period of two days. The system shows dynamic, fully passive self-regulation without maximum power point tracking and without battery management system. The feasibility of a photovoltaic/lithium-ion battery passive hybrid system could therefore be demonstrated.
Mass transfer phenomena in membrane fuel cells are complex and diversified because of the presence of complex transport pathways including porous media of very different pore sizes and possible formation of liquid water. Electrochemical impedance spectroscopy, although allowing valuable information on ohmic phenomena, charge transfer and mass transfer phenomena, may nevertheless appear insufficient below 1 Hz. Use of another variable, that is, back pressure, as an excitation variable for electrochemical pressure impedance spectroscopy is shown here a promising tool for investigations and diagnosis of fuel cells.
Silicon (Si) has turned out to be a promising active material for next‐generation lithium‐ion battery anodes. Nevertheless, the issues known from Si as electrode material (pulverization effects, volume change etc.) are impeding the development of Si anodes to reach market maturity. In this study, we are investigating a possible application of Si anodes in low‐power printed electronic applications. Tailored Si inks are produced and the impact of carbon coating on the printability and their electrochemical behavior as printed Si anodes is investigated. The printed Si anodes contain active material loadings that are practical for powering printed electronic devices, like electrolyte gated transistors, and are able to show high capacity retentions. A capacity of 1754 mAh/gSi is achieved for a printed Si anode after 100 cycles. Additionally, the direct applicability of the printed Si anodes is shown by successfully powering an ink‐jet printed transistor.
Fast charging of lithium-ion batteries remains one of the most delicate challenges for the automotive industry, being seriously affected by the formation of lithium metal in the negative electrode. Here we present a physicochemical pseudo-3D model that explicitly includes the plating reaction as side reaction running in parallel to the main intercalation reaction. The thermodynamics of the plating reaction are modeled depending on temperature and ion concentration, which differs from the often-used assumption of a constant plating condition of 0 V anode potential. The reaction kinetics are described with an Arrhenius-type rate law parameterized from an extensive literature research. Re-intercalation of plated lithium was modeled to take place either via reverse plating (solution-mediated) or via an explicit interfacial reaction (surface-mediated). At low temperatures not only the main processes (intercalation and solid-state diffusion) become slow, but also the plating reaction itself becomes slower. Using this model, we are able to predict typical macroscopic experimental observables that are indicative of plating, that is, a voltage plateau during discharge and a voltage drop upon temperature increase. A spatiotemporal analysis of the internal cell states allows a quantitative insight into the competition between intercalation and plating. Finally, we calculate operation maps over a wide range of C-rates and temperatures that allow to assess plating propensity as function of operating condition.
Modeling and simulation play a key role in analyzing the complex electrochemical behavior of lithium-ion batteries. We present the development of a thermodynamic and kinetic modeling framework for intercalation electrochemistry within the open-source software Cantera. Instead of using equilibrium potentials and single-step Butler-Volmer kinetics, Cantera is based on molar thermodynamic data and mass-action kinetics, providing a physically-based and flexible means for complex reaction pathways. Herein, we introduce a new thermodynamic class for intercalation materials into the open-source software. We discuss the derivation of molar thermodynamic data from experimental half-cell potentials, and provide practical guidelines. We then demonstrate the new class using a single-particle model of a lithium cobalt oxide/graphite lithium-ion cell, implemented in MATLAB. With the present extensions, Cantera provides a platform for the lithium-ion battery modeling community both for consistent thermodynamic and kinetic models and for exchanging the required thermodynamic and kinetic parameters. We provide the full MATLAB code and parameter files as supplementary material to this article.
Oxidation of the nickel electrode is a severe aging mechanism of solid oxide fuel cells (SOFC) and solid oxide electrolyzer cells (SOEC). This work presents a modeling study of safe operating conditions with respect to nickel oxide formation. Microkinetic reaction mechanisms for thermochemical and electrochemical nickel oxidation are integrated into a 2D multiphase model of an anode‐supported solid oxide cell. Local oxidation propensity can be separated into four regimes. Simulations show that the thermochemical pathway generally dominates the electrochemical pathway. As a consequence, as long as fuel utilization is low, cell operation considerably below electrochemical oxidation limit of 0.704 V is possible without the risk of reoxidation.
In this article the high-temperature behavior of a cylindrical lithium iron phosphate/graphite lithium-ion cell is investigated numerically and experimentally by means of differential scanning calorimetry (DSC), accelerating rate calorimetry (ARC), and external short circuit test (ESC). For the simulations a multi-physics multi-scale (1D+1D+1D) model is used. Assuming a two-step electro-/thermochemical SEI formation mechanism, the model is able to qualitatively reproduce experimental data at temperatures up to approx. 200 °C. Model assumptions and parameters could be evaluated via comparison to experimental results, where the three types of experiments (DSC, ARC, ESC) show complementary sensitivities towards model parameters. The results underline that elevated-temperature experiments can be used to identify parameters of the multi-physics model, which then can be used to understand and interpret high-temperature behavior. The resulting model is able to describe nominal charge/discharge operation behavior, long-term calendaric aging behavior, and short-term high-temperature behavior during extreme events, demonstrating the descriptive and predictive capabilities of physicochemical models.