Refine
Year of publication
Document Type
- Article (reviewed) (52) (remove)
Language
- English (52)
Is part of the Bibliography
- yes (52)
Keywords
- Lithiumbatterie (8)
- lithium-ion battery (4)
- Brennstoffzelle (3)
- Modeling (3)
- lithium-ion batteries (3)
- Batterie (2)
- Cantera (2)
- Diffusion (2)
- Durchfluss (2)
- Elektrolyt (2)
Institute
Open Access
- Open Access (24)
- Closed Access (14)
- Diamond (3)
- Gold (2)
- Hybrid (2)
In this paper we present a model of the discharge of a lithium–oxygen battery with aqueous electrolyte. Lithium–oxygen batteries (Li–O2) have recently received great attention due to their large theoretical specific energy. Advantages of the aqueous design include the stability of the electrolyte, the long experience with gas diffusion electrodes (GDEs), and the solubility of the reaction product lithium hydroxide. However, competitive specific energies can only be obtained if the product is allowed to precipitate. Here we present a dynamic one-dimensional model of a Li–O2 battery including a GDE and precipitation of lithium hydroxide. The model is parameterized using experimental data from the literature. We demonstrate that GDEs remove power limitations due to slow oxygen transport in solutions and that lithium hydroxide tends to precipitate on the anode side. We discuss the system architecture to engineer where nucleation and growth predominantly occurs and to optimize for discharge capacity.
Compact solid discharge products enable energy storage devices with high gravimetric and volumetric energy densities, but solid deposits on active surfaces can disturb charge transport and induce mechanical stress. In this Letter, we develop a nanoscale continuum model for the growth of Li2O2 crystals in lithium–oxygen batteries with organic electrolytes, based on a theory of electrochemical nonequilibrium thermodynamics originally applied to Li-ion batteries. As in the case of lithium insertion in phase-separating LiFePO4 nanoparticles, the theory predicts a transition from complex to uniform morphologies of Li2O2 with increasing current. Discrete particle growth at low discharge rates becomes suppressed at high rates, resulting in a film of electronically insulating Li2O2 that limits cell performance. We predict that the transition between these surface growth modes occurs at current densities close to the exchange current density of the cathode reaction, consistent with experimental observations.
Nickel cobalt aluminum oxide (NCA) based lithium-ion battery electrodes exhibit a distinct asymmetry in discharge/charge behavior towards high bulk stoichiometry (low state of charge). We show that basic electrochemical relationships, that is, the Nernst equation and the Butler-Volmer equation, are able to reproduce this behavior when a two-step reaction mechanism is assumed. The two-step mechanism consists of (1) lithium-ion adsorption from the electrolyte onto the active material particle surface under electron transfer, and (2) intercalation of surface-adsorbed lithium atoms into the bulk material. The asymmetry of experimental half-cell data of an NCA electrode cycled at 0.1 C-rate can be quantitatively reproduced with this simple model. The model parameters show two alternative solutions, predicting either a saturated (highly-covered) or a depleted surface for high bulk lithiation.
Impedance of the Surface Double Layer of LSCF/CGO Composite Cathodes: An Elementary Kinetic Model
(2014)
Modeling and Simulation the Influence of Solid Carbon Formation on SOFC Performance and Degradation
(2013)
Battery degradation is a complex physicochemical process that strongly depends on operating conditions. We present a model-based analysis of lithium-ion battery degradation in a stationary photovoltaic battery system. We use a multi-scale multi-physics model of a graphite/lithium iron phosphate (LiFePO4, LFP) cell including solid electrolyte interphase (SEI) formation. The cell-level model is dynamically coupled to a system-level model consisting of photovoltaics (PV), inverter, load, grid interaction, and energy management system, fed with historic weather data. Simulations are carried out for two load scenarios, a single-family house and an office tract, over annual operation cycles with one-minute time resolution. As key result, we show that the charging process causes a peak in degradation rate due to electrochemical charge overpotentials. The main drivers for cell ageing are therefore not only a high state of charge (SOC), but the charging process leading towards high SOC. We also show that the load situation not only influences system parameters like self-sufficiency and self-consumption, but also has a significant impact on battery ageing. We assess reduced charge cut-off voltage as ageing mitigation strategy.
One of the practical bottlenecks associated with commercialization of lithium-air cells is the choice of an appropriate electrolyte that provides the required combination of cell performance, cyclability and safety. With the help of a two-dimensional multiphysics model, we attempt to narrow down the electrolyte choice by providing insights into the effect of the transport properties of electrolyte, electrode saturation (flooded versus gas diffusion), and electrode thickness on a single discharge performance of a lithium-air button cell cathode for five different electrolytes including water, ionic liquid, carbonate, ether, and sulfoxide. The 2D distribution of local current density and concentrations of electrochemically active species (O2 and Li+) in the cathode is also discussed w.r.t electrode saturation. Furthermore, the efficacy of species transport in the cathode is quantified by introducing two parameters, firstly, a transport efficiency that gives local insight into the distribution of mass transfer losses, and secondly, an active electrode volume that gives global insight into the cathode volume utilization at different current densities. A detailed discussion is presented toward understanding the design-induced performance limitations in a Li-air button cell prototype.
The DMFC is a promising option for backup power systems and for the power supply of portable devices. However, from the modeling point of view liquid-feed DMFC are challenging systems due to the complex electrochemistry, the inherent two-phase transport and the effect of methanol crossover. In this paper we present a physical 1D cell model to describe the relevant processes for DMFC performance ranging from electrochemistry on the surface of the catalyst up to transport on the cell level. A two-phase flow model is implemented describing the transport in gas diffusion layer and catalyst layer at the anode side. Electrochemistry is described by elementary steps for the reactions occurring at anode and cathode, including adsorbed intermediate species on the platinum and ruthenium surfaces. Furthermore, a detailed membrane model including methanol crossover is employed. The model is validated using polarization curves, methanol crossover measurements and impedance spectra. It permits to analyze both steady-state and transient behavior with a high level of predictive capabilities. Steady-state simulations are used to investigate the open circuit voltage as well as the overpotentials of anode, cathode and electrolyte. Finally, the transient behavior after current interruption is studied in detail.
Lithium-ion batteries show a complex thermo-electrochemical performance and aging behavior. This paper presents a modeling and simulation framework that is able to describe both multi-scale heat and mass transport and complex electrochemical reaction mechanisms. The transport model is based on a 1D + 1D + 1D (pseudo-3D or P3D) multi-scale approach for intra-particle lithium diffusion, electrode-pair mass and charge transport, and cell-level heat transport, coupled via boundary conditions and homogenization approaches. The electrochemistry model is based on the use of the open-source chemical kinetics code CANTERA, allowing flexible multi-phase electrochemistry to describe both main and side reactions such as SEI formation. A model of gas-phase pressure buildup inside the cell upon aging is added. We parameterize the model to reflect the performance and aging behavior of a lithium iron phosphate (LiFePO4, LFP)/graphite (LiC6) 26650 battery cell. Performance (0.1–10 C discharge/charge at 25, 40 and 60°C) and calendaric aging experimental data (500 days at 30°C and 45°C and different SOC) from literature can be successfully reproduced. The predicted internal cell states (concentrations, potential, temperature, pressure, internal resistances) are shown and discussed. The model is able to capture the nonlinear feedback between performance, aging, and temperature.