Refine
Document Type
- Conference Proceeding (15)
- Article (reviewed) (2)
Conference Type
- Konferenzartikel (15)
Language
- English (17) (remove)
Has Fulltext
- no (17) (remove)
Is part of the Bibliography
- yes (17)
Keywords
- Air Pollution (1)
- Entfernung (1)
- Environmental monitoring (1)
- Geschwindigkeit (1)
- Monocular Depth Estimation (1)
- Optimization (1)
- Schienenfahrzeug (1)
- Wirbelstromsensor (1)
- autonomous systems (1)
- camera-based navigation (1)
Institute
Open Access
- Closed Access (12)
- Closed (2)
- Open Access (1)
This study focuses on the autonomous navigation and mapping of indoor environments using a drone equipped only with a monocular camera and height measurement sensors. A visual SLAM algorithm was employed to generate a preliminary map of the environment and to determine the drone's position within the map. A deep neural network was utilized to generate a depth image from the monocular camera's input, which was subsequently transformed into a point cloud to be projected into the map. By aligning the depth point cloud with the map, 3D occupancy grid maps were constructed by using ray tracing techniques to get a precise depiction of obstacles and the surroundings. Due to the absence of IMU data from the low-cost drone for the SLAM algorithm, the created maps are inherently unscaled. However, preliminary tests with relative navigation in unscaled maps have revealed potential accuracy issues, which can only be overcome by incorporating additional information from the given sensors for scale estimation.
Modern industrial production is heavily dependent on efficient workflow processes and automation. The steady flow of raw materials as well as the separation of vital parts and semi-finished products are at the core of these automated procedures. Commonly used systems for this work are bowl feeders, which separate the parts and material by a combination of mechanical vibration and friction. The production of these tools, especially the design of the ramping spiral, is delicate and time-consuming work, as the shape, slope, and material must be carefully adjusted for the corresponding parts. In this work, we propose an automated approach, making use of optimization procedures from artificial intelligence, to design the spiral ramps of the bowl feeders. Therefore, the whole system and considered parts are physically simulated and the optimized geometry is subsequently exported into a CAD system for the actual building, respectively printing. The employment of evolutionary optimization gives the need to develop a mathematical model for the whole setup and find an efficient representation of integral features.
Object Detection and Mapping with Unmanned Aerial Vehicles Using Convolutional Neural Networks
(2021)
Significant progress has been made in the field of deep learning through intensive research over the last decade. So-called convolutional neural networks are an essential component of this research. In this type of neural network, the mathematical convolution operator is used to extract characteristics or anomalies. The purpose of this work is to investigate the extent to which it is possible in certain initial settings to input aerial recordings and flight data of Unmanned Aerial Vehicles (UAVs) in the architecture of a neural network and to detect and map an object. Using the calculated contours or dimensions of the so-called bounding boxes, the position of the objects can be determined relative to the current UAV location.
The applicability of characteristics of local magnetic fields for more precise determination of localization of subjects and/or objects in indoor environments, such as railway stations, airports, exhibition halls, showrooms, or shopping centers, is considered. An investigation has been carried out to find out whether and how low-cost magnetic field sensors and mobile robot platforms can be used to create maps that improve the accuracy and robustness of later navigation with smartphones or other devices.
The aim of this work is the application and evaluation of a method to visually detect markers at a distance of up to five meters and determine their real-world position. Combinations of cameras and lenses with different parameters were studied to determine the optimal configuration. Based on this configuration, camera images were taken after proper calibration. These images are then transformed into a bird's eye view using a homography matrix. The homography matrix is calculated with four-point pairs as well as with coordinate transformations. The obtained images show the ground plane un distorted, making it possible to convert a pixel position into a real-world position with a conversion factor. The proposed approach helps to effectively create data sets for training neural networks for navigation purposes.
The precise positioning of mobile systems is a prerequisite for any autonomous behavior, in an industrial environment as well as for field robotics. The paper describes the set up for an experimental platform and its use for the evaluation of simultaneous localization and mapping (SLAM) algorithms. Two approaches are compared. First, a local method based on point cloud matching and integration of inertial measurement units is evaluated. Subsequent matching makes it possible to create a three-dimensional point cloud that can be used as a map in subsequent runs. The second approach is a full SLAM algorithm, based on graph relaxation models, incorporating the full sensor suite of odometry, inertial sensors, and 3D laser scan data.
A novel approach for synchronization and calibration of a camera and an inertial measurement unit (IMU) in the research-oriented visual-inertial mapping-and localization-framework maplab is presented. Mapping and localization are based on detecting different features in the environment. In addition to the possibility of creating single-case maps, the included algorithms allow merging maps to increase mapping accuracy and obtain large-scale maps. Furthermore, the algorithms can be used to optimize the collected data. The preliminary results show that after appropriate calibration and synchronization maplab can be used efficiently for mapping, especially in rooms and small building environments.
In this contribution, we propose an system setup for the detection andclassification of objects in autonomous driving applications. The recognition algo-rithm is based upon deep neural networks, operating in the 2D image domain. Theresults are combined with data of a stereo camera system to finally incorporatethe 3D object information into our mapping framework. The detection systemis locally running upon the onboard CPU of the vehicle. Several network archi-tectures are implemented and evaluated with respect to accuracy and run-timedemands for the given camera and hardware setup.
The paper describes a systematic approach for a precise short-time cloud coverage prediction based on an optical system. We present a distinct pre-processing stage that uses a model based clear sky simulation to enhance the cloud segmentation in the images. The images are based on a sky imager system with fish-eye lens optic to cover a maximum area. After a calibration step, the image is rectified to enable linear prediction of cloud movement. In a subsequent step, the clear sky model is estimated on actual high dynamic range images and combined with a threshold based approach to segment clouds from sky. In the final stage, a multi hypothesis linear tracking framework estimates cloud movement, velocity and possible coverage of a given photovoltaic power station. We employ a Kalman filter framework that efficiently operates on the rectified images. The evaluation on real world data suggests high coverage prediction accuracy above 75%.
This paper presents an approach for implementing an automated hit detection and score calculation system for a steel dartboard using a standard webcam. First, the rectilinear field separations of the dartboard are described mathematically by means of line slopes and are than stored. These slopes serve as a basis for later score calculation. In addition, thrown darts have to be detected and the pixel at which the dart cuts the dartboard has to be determined. When this information is known, a comparison is made using the line slopes, allowing the field number of the hit to be detected. The decision for single, double or triple hit is made by evaluating the defined colors on the dartboard. All these functions are then packaged in a Matlab GUI.