Refine
Document Type
Language
- English (2)
Is part of the Bibliography
- yes (2)
Keywords
- Binder-based AM (1)
- Binder-basiertes AM (1)
- Entbinderung (1)
- Infrarot-Spektroskopie (1)
- Ofenparametrisierung (1)
- Prozessatmosphären (1)
- anisotropy (1)
- biomaterials (1)
- debinding (1)
- furnace parameterization (1)
Open Access
- Closed (2)
Gas Analysis and Optimization of Debinding and Sintering Processes for Metallic Binder-Based AM*
(2022)
Binder-based additive manufacturing processes for metallic
AM components in a wide range of applications usually use
organic binders and process-related additives that must be
thermally removed before sintering. Debinding processes are
typically parameterized empirically and thus far from the optimum.
Since debinding based on thermal decomposition processes
of organic components and the subsequent thermochemical
reactions between process atmosphere and metal
powder materials make uncomplicated parameterization difficult,
in-situ instrumentation was introduced at Fraunhofer
IFAM. This measurement method relies on infrared spectroscopy
and mass spectrometry in various furnace concepts to
understand the gas processes of decomposition of organic
components and the subsequent thermochemical reactions
between the carrier gas atmosphere and the metal part, as well
as their kinetics. This method enables an efficient optimization
of the temperature-time profiles and the required atmosphere
composition to realize dense AM components with low contamination.
In the paper, the optimization strategy is presented,
and the achievable properties are illustrated using a fused
filament fabrication (FFF) component example made of 316L
stainless steel.
Inadequate mechanical compliance of orthopedic implants can result in excessive strain of the bone interface, and ultimately, aseptic loosening. It is hypothesized that a fiber-based biometal with adjustable anisotropic mechanical properties can reduce interface strain, facilitate continuous remodeling, and improve implant survival under complex loads. The biometal is based on strategically layered sintered titanium fibers. Six different topologies are manufactured. Specimens are tested under compression in three orthogonal axes under 3-point bending and torsion until failure. Biocompatibility testing involves murine osteoblasts. Osseointegration is investigated by micro-computed tomography and histomorphometry after implantation in a metaphyseal trepanation model in sheep. The material demonstrates compressive yield strengths of up to 50 MPa and anisotropy correlating closely with fiber layout. Samples with 75% porosity are both stronger and stiffer than those with 85% porosity. The highest bending modulus is found in samples with parallel fiber orientation, while the highest shear modulus is found in cross-ply layouts. Cell metabolism and morphology indicate uncompromised biocompatibility. Implants demonstrate robust circumferential osseointegration in vivo after 8 weeks. The biometal introduced in this study demonstrates anisotropic mechanical properties similar to bone, and excellent osteoconductivity and feasibility as an orthopedic implant material.