Refine
Document Type
- Conference Proceeding (3)
- Report (1)
Conference Type
- Konferenzartikel (3)
Has Fulltext
- no (4)
Is part of the Bibliography
- yes (4)
Keywords
- Automatisierungstechnik (1)
- ETAP Simulations (1)
- Load Flow Analysis (1)
- Power Loss (1)
- Smart Energy Metering (1)
- Smart-UPS (1)
- Total Harmonic Distortion (1)
Institute
Open Access
- Closed Access (3)
- Closed (1)
To deal with frequent power outages in developing countries, people turn to solutions like uninterruptible power supply (UPS), which stores electric energy during normal operating hours and use it to meet energy needs during rolling blackout intervals. Locally produced UPSs of poorer power quality are widely accessible in the marketplaces, and they have a negative impact on power quality. The charging and discharging of the batteries in these UPSs generate significant amount of power losses in weak grid environments. The Smart-UPS is our proposed smart energy metering (SEM) solution for low voltage consumers that is provided by the distribution company. It does not require batteries, therefore there is no power loss or harmonic distortion due to corresponding charging and discharging. Through load flow and harmonic analysis of both traditional UPS and Smart-UPS systems on ETAP, this paper examines their impact on the harmonics and stability of the distribution grid. The simulation results demonstrate that Smart-UPS can assist fixing power quality issues in a developing country like Pakistan by providing cleaner energy than the battery-operated traditional UPSs.
Due to its potential in improving the efficiency of energy supply, smart energy metering (SEM) has become an area of interest with the surge in Internet of Things (IoT). SEM entails remote monitoring and control of the sensors and actuators associated with the energy supply system. This provides a flexible platform to conceive and implement new data driven Demand Side Management (DSM) mechanisms. The IoT enablement allows the data to be gathered and analyzed at requisite granularity. In addition to efficient use of energy resources and provisioning of power, developing countries face an additional challenge of temporal mismatch in generation capacity and load factors. This leads to widespread deployment of inefficient and expensive Uninterruptible Power Supply (UPS) solutions for limited power provisioning during resulting blackouts. Our proposed “Soft-UPS” allows dynamic matching of load and generation through a combination of managed curtailment. This eliminates inefficiencies in the energy and power value chain and allows a data-driven approach to solving a widespread problem in developing countries, simultaneously reducing both upfront and running costs of conventional UPS and storage. A scalable and modular platform is proposed and implemented in this paper. The architecture employs “WiMODino” using LoRaWAN with a “Lite Gateway” and SQLite repository for data storage. Role based access to the system through an android application has also been demonstrated for monitoring and control.
For the past few years Low Power Wide Area Networks (LPWAN) have emerged as key technologies for the connectivity of many applications in the Internet of Things (IoT) combining low-data rates with strict cost and energy restrictions. Especially LoRa/LoRaWAN enjoys a high visibility on today’s markets, because of its good performance and its open community. Originally LoRa was designed for operation within the Sub-GHz ISM bands for Industrial, Scientific and Medical applications. However, at the end of 2018, a LoRa-based solution in the 2.4GHz ISM-band was presented promising higher bandwidths and higher data rates. Furthermore, it overcomes the limited duty-cycle prescribed by the regulations in the ISM-bands and therefore also opens doors to many novel application fields. Also, due to higher bandwidths and shorter transmission times, the use of alternative MAC layer protocols becomes very interesting, i.e. for TDMA based-approaches. Within this paper, we propose a system architecture with 2.4GHz LoRa components combining two aspects. On the one hand, we present a design and an implementation of a 2.4GHz based LoRaWAN solution that can be seamlessly integrated into existing LoRaWAN back-hauls. On the other hand, we describe deterministic setup using a Time Slotted Channel Hopping (TSCH) approach as defined in the IEEE802.15.4-2015 standard for industrial applications. Finally, measurements show the performance of the system.
Das Monitoring von Industrieanlagen stellt in der Wirtschaft sicher, dass hoch-automatisierte Prozesse reibungslos ablaufen können. Meistens steht hier das Monitoring der Anlagen selbst im Mittelpunkt, die Kommunikationsleitungen für den Datenaustausch auf Ethernet-Basis (z.B. Profinet) sind gegenwärtig noch nicht Teil einer kontinuierlichen Überwachung. Zwar werden auch hier die physischen Verbindungen überprüft, jedoch geschieht häufig dies nur zum Zeitpunkt der Inbetriebnahme, wenn die Anlage noch nicht in das Gesamtsystem integriert ist oder während eines Wartungszyklus, wenn die Maschine für die Dauer der Wartung aus dem Betriebsablauf genommen wird. Dies führt dazu, dass insbesondere heute, wo vor allem Ethernet zunehmend als Basis für die industrielle Kommunikation herangezogen wird, Maschinenausfälle aufgrund fehlender Kabelüberwachung immer wahrscheinlicher werden. Um dem entgegenwirken zu können, wurde im Projekt Ko2SiBus ein neues Messverfahren konzipiert, implementiert und validiert, das kostengünstig in neue oder bestehende Systeme integriert werden kann. Um die Tauglichkeit zu zeigen, wurden die Projektergebnisse in Prototypen und Demonstratoren implementiert, die sowohl als Stand-Alone aber auch als Integrationslösungen dienen können.