Refine
Year of publication
Document Type
- Conference Proceeding (58)
- Article (reviewed) (10)
- Book (8)
- Contribution to a Periodical (4)
- Patent (4)
- Article (unreviewed) (3)
- Part of a Book (1)
- Letter to Editor (1)
Conference Type
- Konferenzartikel (56)
- Konferenz-Abstract (1)
- Konferenz-Poster (1)
Language
- English (61)
- German (27)
- Other language (1)
Is part of the Bibliography
- yes (89) (remove)
Keywords
- Additive Manufacturing (7)
- Ausbildung (6)
- Produktion (6)
- Additive Tooling (4)
- CAD (4)
- Design (4)
- Digitalisierung (3)
- Druck (3)
- Götz von Berlichingen (3)
- 3D-Druck (2)
Institute
- Fakultät Wirtschaft (W) (81)
- Fakultät Maschinenbau und Verfahrenstechnik (M+V) (10)
- Fakultät Elektrotechnik und Informationstechnik (E+I) (bis 03/2019) (5)
- Fakultät Elektrotechnik, Medizintechnik und Informatik (EMI) (ab 04/2019) (4)
- Fakultät Medien und Informationswesen (M+I) (bis 21.04.2021) (1)
- WLRI - Work-Life Robotics Institute (1)
- Zentrale Einrichtungen (1)
Open Access
- Open Access (34)
- Closed Access (32)
- Closed (10)
- Diamond (3)
- Gold (2)
- Bronze (1)
- Hybrid (1)
Experimental and numerical investigations into the forming of tailored strips and tailored tubes
(2008)
Through the application of tailored strips and tailored tubes, the wall thickness of components can be manufactured in a load-optimised manner. Thus, it is also possible to optimise component weight. Prior to the application of tailored products, wall thicknesses and the respective degree of deformation as well as the welding seam position can be determined in a FEM (finite element method) simulation. These results are then verified in test series on transfer presses and tube bending machines, with the necessary tool adaptations being determined in the process. This results in weight and cost reductions for deep-drawn components and tube sections. Moreover, this means that especially with regard to tubes, multiple sections can be combined in one component. A feasibility study shows that the level of possible weight and cost savings depends on the respective component geometry and load situation. Additional costs for the production of tailored products and - if necessary - tool modifications also need to be considered. Thus, the amount of savings possible for a part can only be determined on an individual basis.
Today, thermoforming moulds are mostly produced using conventional mould-building technologies (e.g. milling and drilling) and are made of metal (e.g. aluminium or steel) or hardwood. The tools thus produced are very robust, but are only cost-effective in mass production. For the production of small batches of thermoformed parts, there is a need for moulds which can be produced quickly and economically. A new approach which significantly reduces the production time and cost is the 3D printing process (3DP). The use of this technology to produce thermoforming moulds offers many new options in the geometries which can be manufactured, and in manufacturing time and costs. In a case study of a thermoformed part (a scaled automotive model), the pre-processing of the CAD model of a mould is demonstrated. The mould can be printed within a few hours, and is sufficiently heat-resistant for moulding processes. The important advantages of moulds printed in 3D, in comparison to moulds built using conventional technologies, are the ability to create any shape of channels for the vacuum and the simplification in the production of tool mock-ups. This paper also discusses the economics of the technique, such as a comparison of material costs and manufacturing costs in relation to conventional production technologies and materials.
Der effektive Einsatz von Energie ist vor dem Hintergrund von begrenzten Ressourcen und der Forderung nach einer Reduzierung der bei der Energiegewinnung entstehenden Umweltbelastungen von wachsender Bedeutung. Für die noch relativ junge Gruppe der generativen Fertigungsverfahren liegen bis heute kaum Untersuchungen zum Energieverbrauch vor. Deshalb werden in diesem Beitrag zwei weit verbreitete Rapid-Prototyping-Verfahren (3D-Drucken und Fused Deposition Modeling) hinsichtlich ihres Energieverbrauchs untersucht und verglichen. Zudem werden Maßnahmen zur Steigerung der Energieeffizienz aufgezeigt und Einsparmöglichkeiten genannt.
Various Rapid Prototyping methods have been available for the production of physical architectural models for a few years. This paper highlights in particular the advantages of 3D printing for the production of detailed architectural models. In addition, the current challenges for the creation and transfer of data are explained. Furthermore, new methods are being developed in order to improve both the technical and economic boundary conditions for the application of 3DP. This makes the production of models with very detailed interior rooms possible. The internal details are made visible by dividing the complex overall model into individual models connected by means of an innovative plug-in system. Finally, two case studies are shown in which the developed methods are applied in order to implement detailed architectural models. Additional information about manufacturing time and costs of the architectural models in the two case studies is given.
A variety of different additive manufacturing processes have been available for the last three decades. Some of these technologies are very energy-intensive, e.g. laser technology and the manufacture of metal powder. In many areas, the detailed investigation of the energy and material consumption of these new manufacturing methods is still in the beginning. This paper investigates energy and material consumption using 3D colour printing (3DP) as an example. The specific energy required for the layering can be determined from this. This then forms the basis for a comparison of the specific energy consumption with other generative (e.g. Fused Layer Modelling—FLM) and also conventional production processes (e.g. milling and grinding). Thus process selection is facilitated by introducing the specific energy for layering. In addition several variables, in which resource consumption can be reduced are also investigated and compared. For example the influence of the geometry or the positioning of the 3D-printed part in the design space on the consumption are investigated. But also the measuring of different batch sizes is compared. Using the results found, the use of 3D printing can initially be optimized so that less energy, resources and manufacturing time are required.
In addition to traditional methods in product development, the increasing availability of two new technologies, namely additive manufacturing AM (e.g. 3D-printing) and reverse engineering RE by means of 3D-scanning, offer new opportunities in product development processes today. However, to date only very few approaches exist those include these new technologies systematically in the education of students in the field of product development. This paper explores several ways in which AM and RE can productively be used in education. New to this approach is, on the one hand, that the students assemble and install the 3Dprinters themselves, and on the other hand, that they are introduced to an approach that combines 3D-scanning followed by 3D-printing. In different case studies is demonstrated that students in design education are able to autonomously research and realize technical possibilities and limitations of these technologies, as well as economic parameters and constraints.
In addition to traditional methods in product development, the increasing availability of additive manufacturing AM technologies offer new opportunities in product development processes today. This contribution explores several ways in which AM can productively be used in education. New to this approach is amongst others that the students assemble and install the 3D-printers themselves. In two case studies is demonstrated how students in design education are able to autonomously research and realize technical possibilities and limitations of AM technologies, as well as economic constraints.
Various rapid prototyping methods have been available for the production of physical architectural models for a few years. This paper highlights in particular the advantages of 3D printing and Fused Layer Modeling for the production of detailed architectural models. In addition, the current challenges for the creation and transfer of CAAD-data are explained. Furthermore, new methods are being developed in order to improve both the technical and economic boundary conditions for the application of 3DP und FLM. This makes the production of models with very detailed interior rooms possible. The internal details are made visible by dividing the complex overall model into individual models connected by means of an innovative plug-in system. In addition, three case studies are shown in which the developed methods are applied in order to implement detailed architectural models. Finally manufacturing time and costs of the architectural models in the three case studies are compared.
Additive Manufacturing and Reverse Engineering have increasingly been gaining in importance over the past years. This paper investigates the current status of the implementation of these new technologies in design education and also identifies current shortcomings. Then it develops two new approaches for the teaching of the necessary expertise for the design of 3D-printed components and illustrates these with case studies. First, a workshop is presented in which students gain a broad understanding for the functionalities of additive manufacturing and the creative possibilities and limits of this process, through the assembly and installation of a 3D-printer. A second new approach is the combination of reverse engineering and 3D-printing. Thereby, students learn how to deal with this complex process chain. The result of these new approaches can e.g. be seen in the design guidelines for Additive Manufacturing, which were developed by the students themselves. At the same time, the students are able to estimate opportunities and limits of both technologies. Finally, the success of the new course contents and form is reviewed by an evaluation by the students.
This paper presents a new approach for the teaching of competence in additive manufacturing to engineering students in product development. Particularly new to this approach is the combination of the students' autonomous assembly and commissioning of a 3D-printer, and the independent development of guidelines for this new technology regarding the design of components. This way the students will be able to gain first practical experiences with the data preparation, the additive manufacturing process itself and also the required post-treatment of the 3D-printed parts. To allow the students a significantly deeper insight into the functioning of 3D-printing, the workshop Rapid Prototyping developed a new approach in the course of which the students first assemble a construction kit for a 3D-printer themselves and then commission the printer. This enables the students to gain a better understanding of the functionality and configuration of additive manufacturing. In a next step, the students used the 3D-printers they constructed themselves to produce components which they take from a database. Finally, the experiences of the students in the course of the workshop will be evaluated to review the effectiveness of the new approach.
In addition to traditional methods in product development, the increasing availability of two new 3D digital technologies, namely digital manufacturing (3D-printing) and digitizing of surfaces (3D-scanning), offer new opportunities in product development processes today. With regard to the systematic implementation of these technologies in the education of students in the field of product development, however, only a small number of approaches exist so far. This paper explores several ways in which 3D digital technologies can productively be used in design education. The innovative aspects here include that the students assemble and install the 3D-printers themselves, and that they are introduced to an approach that combines 3D-scanning followed by 3D-printing.
Application of Polymer Plaster Composites in Additive Manufacturing of High-Strength Components
(2015)
Today, 3D-printing with polymer plaster composites is a common method in Additive Manufacturing. This technique has proven to be especially suitable for the production of presentation models, due to the low cost of materials and the possibility to produce color-models. But nowadays it requires refinishing through the manual application of a layer of resin. However, the strength of these printed components is very limited, as the applied resin only penetrates a thin edge layer on the surface. This paper develops a new infiltration technique that allows for a significant increase in the strength of the 3D-printed component. For this process, the components are first dehydrated in a controlled two-tier procedure, before they are then penetrated with high-strength resin. The infiltrate used in this process differs significantly from materials traditionally used for infiltration. The result is an almost complete penetration of the components with high-strength infiltrate. As the whole process is computer-integrated, the results are also easier to reproduce, compared to manual infiltration. On the basis of extensive material testing with different testing specimen and testing methods, it can be demonstrated that a significant increase in strength and hardness can be achieved. Finally, this paper also considers the cost and energy consumption of this new infiltration method. As a result of this new technology, the scope of applicability of 3D-printing can be extended to cases that require significantly more strength, like the production of tools for the shaping of metals or used for the molding of plastics. Furthermore, both the process itself and the parameters used are monitored and can be optimized to individual requirements and different fields of application.
In recent years simple CAD systems have entered the market, which are offered as freeware or open source projects. These systems prove to be a key technology especially for the further expansion of 3D printing, because a 3D model of the object to be printed is a prerequisite for the use of a 3D printer. Therefore, this contribution reviews several common simple CAD systems. Thus technical and economic criteria are evaluated. It is also demonstrated how the models designed in this manner can be used in 3D printing. A case study shows the possibilities and limitations to be expected when using simple CAD systems.
Additive manufacturing (AM), or 3D printing (3DP), has increasingly become more wide-spread and applied to a great degree over the past years. Along with that, the necessity for training courses which impart the required knowledge for product development with 3D printing rises. This article will introduce a “Rapid Prototyping” workshop which should convey to students the technical and creative knowledge for product development in using additive manufacturing. In this workshop, various 3D printers are initially installed and put into operation for the construction of self-assembly kits during the introduced training course. Afterwards, the students use databanks to select and download suitable components for the 3D print on the basis of criteria. Lastly, the students develop several assembly kits independently and establish design guidelines based on their experience. The students likewise learn to estimate and evaluate economic boundaries such as, e.g. costs and delivery times. For a start, it is a new approach to be using various assembly kits. These are up to date with current technology and dispose of features such as, e.g., additional nozzles for support material and heated building platforms. Moreover, a comprehensive evaluation of the training success will be conducted. The students’ level of knowledge in various areas will also be determined and compared with surveys taken before and after the conducting of the workshops. Additionally, cost and delivery time estimates and knowledge of databanks will be determined through concrete questioning.
A number of design rules must be adhered to in the development and manufacturing of unmanned aerial vehicles. In this, additive manufacturing, particularly in the implementation of requirements with respect to light-weight construction and sustainability, offers several advantages compared to conventional manufacturing methods. Therefore, this article will primarily introduce and compare current concepts for sustainable design using additive manufacturing. These will, above all, consist of the production of complete fuselages and wings by means of rapid prototyping or also rapid tooling. In addition, a new concept will be introduced in which a UAV using AM can be implemented through the combination of very light components and a preferably resource-saving manufacturing method. In this process, a three-dimensional spaceframe is used in combination with a covering in the construction of the wing. Hereby, the development process for sustainable design using additive manufacturing will be analyzed and the results will be explained by means of concrete case studies. In conclusion, the results of these case studies will be compared to the latest technology regarding wing span load.
Dieses Lehr- und Übungsbuch ermöglicht dem Anfänger in der 3D-Modellierung einen schnellen Einstieg in die Arbeit mit dem neuen CAD-System Onshape. Als cloudbasierte Freeware bietet Onshape einen kostenlosen und einfachen Zugang zu CAD über das Internet. In diesem Buch wird als praktisches Übungsbeispiel ein Miniaturauto mit Ballonantrieb modelliert. Dabei werden die besonderen Anforderungen an eine 3D-Druck-gerechte Gestaltung erläutert und umgesetzt. Schwerpunkte bilden die grundlegenden Funktionen zur Modellierung von Einzelteilen und Baugruppen sowie die Erstellung von einfachen technischen Zeichnungen. Somit ist das Ergebnis dieser „Schritt für Schritt“-Anleitung die vollständige Modellierung eines Miniaturautos, das am 3D-Drucker in ein reales Modell umgesetzt und einfach zusammengebaut werden kann. Das didaktische Konzept ist so ausgelegt, dass alle Schritte für ein Selbststudium geeignet sind.
Today the methods of numerical simulation of sheet metal forming offer a great diversity of possibilities for optimization in product development and in process design. However, the results from simulation are only available as virtual models. Because there are any forming tools available during the early stages of product development, physical models that could serve to represent the virtual results are therefore lacking. Physical 3D-models can be created using 3D-printing and serve as an illustration and present a better understanding of the simulation results. In this way, the results from the simulation can be made more “comprehensible” within a development team. This paper presents the possibilities of 3D-colour printing with particular consideration of the requirements regarding the implementation of sheet metal forming simulation. Using concrete examples of sheet metal forming, the manufacturing of 3D colour models will be expounded upon on the basis of simulation results.
Virtuelle Modell "begreifbar" Machen - Darstellung von Simulationsergebnissen mittels 3D-Farbdruck
(2016)
Einsatz von Additive Manufacturing zur Darstellung von Simulationsergebnissen in der Blechumformung
(2016)
Dieses Lehrbuch ermöglicht dem Anfänger in der 3D-Modellierung einen schnellen Einstieg in die Arbeit mit dem cloudbasierten CAD-System Onshape, das über das Internet einen einfachen Zugang zu praxisorientiertem CAD bietet. Der Schwerpunkt liegt dabei auf den grundlegenden Funktionen zur Modellierung von Einzelteilen und Baugruppen, sowie in der Erstellung von einfachen technischen Zeichnungen. Dabei werden bei jedem Schritt die besonderen Anforderungen an eine 3D-Druck-gerechte Gestaltung erläutert und umgesetzt. Somit ist das Ergebnis dieser „Schritt für Schritt“-Anleitung die vollständige Modellierung eines Miniatur-Automobils, das am 3D-Drucker in ein reales Modell umgesetzt werden kann. Das didaktische Konzept ist so ausgelegt, dass alle Schritte für ein Selbststudium geeignet sind. Die aktuelle Auflage basiert jetzt auf der deutschen Version und erläutert die Nutzung von Zusatzfunktionen mittels App.
In recent years, the additive manufacturing processes have rapidly developed. The additive manufacturing processes currently present a high-performance alternative to conventional manufacturing methods. In particular, they offer the opportunity of previously hardly imaginable design freedom, i.e. the implementation of complex forms and geometries. This capability can, for example, be applied in the development of especially light but still loadable components in automotive engineering. In addition, waste material is seldom produced in additive manufacturing which benefits a sustainable production of building components. Until now, this design freedom was barely used in the construction of technical components and products because, in doing so, both specific design guidelines for additive manufacturing and complex strength calculations must be simultaneously observed. Yet in order to fully take advantage of the additive manufacturing potential, the method of topology optimization, based on FEM simulation, suggests itself. It is with this method that components that are precisely matched and are especially light, thereby also resource-saving, can be produced. Current literature research indicates that this method is used in automotive manufacturing for reducing weight and improving the stability of both individual parts and assembly units. This contribution will study how this development method can be applied in the example of a brake mount from an experimental vehicle. In this, the conventional design is improved by means of a simulation tool for topology optimization in various steps. In an additional processing step, the smoothing of the thus developed component occurs. Finally, the component is generatively manufactured by means of selective laser melting technology. Models are manufactured using binder jetting for the demonstration of the process. It will also be determined how this weight reduction affects the CO2 emissions of a vehicle in use.
Additive manufacturing processes have evolved rapidly in recent years and now offer a wide range of manufacturing technologies and workable materials. This range from plastics and metals to paper and even polymer plaster composites. Due to the layer by layer structure of the components the additive processes have in comparison with conventional manufacturing processes the advantage of freedom of design, that means the simple implementation of complex geometries. Moreover, the additive processes provide the advantage of reduced consumption of resources, since essentially only the material is consumed, which is required for the actual component, since no waste in the form of chips is produced. In order to use these advantages, the potentials of additive manufacturing and the requirements of sustainable design must already be observed in the product development process. So the design of the components and products must be made so as little as possible construction and supporting material is required for the generative production and therefore little resources are consumed. Also, all steps of the additive manufacturing process must be considered properly, that includes the post processing. This allows components be designed so that for instance the effort for removing the support structure is considerably reduced. This leads to a significant reduction in manufacturing time and thus energy consumption. The implementation of these potentials in product development can be demonstrated by means of a multiple-stages model. A case study shows how this model is applied in the training of Master students in the field of product development. In a workshop the students work as a group while implementing the task of developing a miniature racing car under the rules of sustainable design in compliance with the boundary conditions for an additive manufacturing. In this case, Fused Deposition Modelling FDM using plastics as a building material is applied. The results show how the students have dealt with the different requirements and how they have implemented them in product development and in the subsequent additive manufacturing.
The present-day methods of numerical simulation offer a great variety of options for optimizing metal forming processes. Although it is possible to simulate complex forming processes, the results are typically available only as 2D projections on screens. Some forming processes have reached a level of complexity beyond the level of spatial sense, which makes it necessary to use physical 3D representations to develop a deeper understanding of the material flow, microstructural processes, process and design limits, or to design the required tooling. Physical 3D models can be produced in a short amount of time using 3D printing, and indexed with a wide range of colors. In this paper, the additive manufacturing of 3D color models based on simulation results are explored by means of examples from metal forming. Different 3D-printing processes are compared on the basis of quality as well as technical and economic criteria. Other examples from the fields joining by upset-bulging of tubes and microstructure simulation are also analyzed. This paper discusses the possibilities offered by the rapid progress and wide availability of 3D printers for the design and optimization of complex metal forming processes.
Architecture models are an essential component of the development process and enable a physical representation of virtual designs. In addition to the conventional methods of model production using the machining of models made of wood, metal, plastic or glass, a number of additive manufacturing processes are now available. These new processes enable the additive manufacturing of architectural models directly from CAAD or BIM data. However, the boundary conditions applicable to the ability to manufacture models with additive manufacturing processes must also be considered. Such conditions include the minimum wall thickness, which depends on the applied additive manufacturing process and the materials used. Moreover, the need for the removal of support structures after the additive manufacturing process must also be considered. In general, a change in the scale of these models is only possible at very high effort. In order to allow these restrictions to be adequately incorporated into the CAAD model, this contribution develops a parametrized CAAD model that allows such boundary conditions to be modified and adapted while complying with the scale. Usability of this new method is illustrated and explained in detail in a case study. In addition, this article addresses the additive manufacturing processes including subsequent post-processing.
Implementation of lightweight design in the product development process of unmanned aerial vehicles
(2017)
The development and manufacturing of unmanned aerial vehicles (UAVs) require a multitude of design rules. Thereby, additive manufacturing (AM) processes provide a number of significant advantages over conventional production methods, particularly for implementing requirements with regard to lightweight construction and sustainability. A new, promising approach is presented, with which, through the combination of very light structural elements with a ribbed construction, an attached covering by means of foil is used. This contribution develops and presents a development process that is based on various development cycles. Such cycles differ in their effort and scope within the overall development, and may only comprise one part of the development process, or the entire development process. The applicability of this development process is demonstrated within the framework of a comprehensive case study. The aim is to develop an additively manufactured product that is as light as possible in the form of a UAV, along with a sustainable manufacturing process for such product. Finally, the results of this case study are analyzed with regard to the improvement of lightweight construction.
In this study, we tested the function of a replica of the over 500-year-old original of the
famous Franconian Imperial Knight Götz von Berlichingen’s first “iron hand”, which we
reconstructed by computer-aided design (CAD) and recently printed using a multi-material
3D printer. In different everyday tasks, the artificial hand prosthesis proved to be remarkably
helpful. Thus, the hand could hold a wine glass, some grapes, or a smartphone. With a
suitable pencil, even writing was possible without any problem. Although for all these
functions the healthy other hand was necessary to assist at the beginning, the artificial hand
is an astonishing mechanical aid with many possibilities. Therefore, in certain cases, the
non-invasive approach of a passive mechanical hand replacement, which is an individual,
quick and cheap solution due to modern 3D printing, may always be worth considering
also for today’s requirements.
Dieser Beitrag stellt die Möglichkeiten des 3D-Druckes unter der Berücksichtigung von Mensch-Roboter-Kollaborations-Anforderungen dar. Dabei werden die Vorteile mit besonderem Fokus auf die zusätzliche Gestaltungsfreiheit erläutert. Anhand von Beispielen wird der Stand der Technik bereits eingesetzter Sensorik sowie deren Notwendigkeit in Greifsystemen erläutert. Im weiteren Verlauf dieses Beitrags werden allgemeine Verfahren für die additive Verarbeitung von leitfähigen Materialien vorgestellt. Daran angeknüpft sind Beispiele speziell zur 3D-gedruckten Sensorik. Abgerundet wird der Beitrag mit einem Ausblick bezüglich 3D-gedruckter Sensorik in MRK-Greifsystemen.
Implementation of interdisciplinary student teams in design education for additive manufacturing
(2018)
Additive manufacturing (AM) technologies are becoming increasingly popular in all areas of product development. Therefore, it is imperative that students be taught Design for AM. However, due to the rapid development of new methods and materials for AM, it does not make sense to only teach particular design guidelines, as these can quickly become obsolete. Rather, students should acquire the competence to develop guidelines themselves, that take into account the current state of the art. Thus, they will be able to react to changing processes and new materials
in the future. In order to convey the independent development of design guidelines for additive manufacturing by students, a new concept was developed, which is presented in this contribution. In this process, the learning goal is worked out by a group of students on the basis of a practical
task. The group consists of an interdisciplinary team in order to combine different competencies and to provide different perspectives on the task. A case study will show the design and manufacture of a miniature aircraft using Fused Layer Modelling. The aim of the development is above all the design for additive manufacturing. In addition, a low use of resources in combination with lightweight construction should be achieved. In the implementation of the task, the students are confronted with challenging aerodynamic design of wings as well as with the economic evaluation of the development process. An examination of the level of knowledge before and after the case study examines the learning success.
Various methods of Digital Manufacturing (DM) have been available for the manufacturing of physical architectural models for several years. This paper highlights the advantages of 3D printing for digital manufacturing of detailed architectural models. In particular, the representation of architectural details and textures is treated. Furthermore, two new methods are being developed in order to improve the conditions for the application of digital manufacturing of architectural models.
Besides of conventional CAD systems, new, cloudbased CAD systems have also been available for some years. These CAD systems designed according to the principle of software as a service (SaaS) differ in some important features from the conventional CAD systems. Thus, these CAD systems are operated via a browser and it is not necessary to install the software on a computer. The CAD-data is stored in the cloud and not on a local computer or central server. This new approach should also facilitate the sharing and management of data. Finally, many of these new CAD systems are available as freeware for education purposes, so the universities can save license costs. The chances and risks of cloud-based systems will first be analyzed in this paper. Then two leading cloud-based CAD systems will be researched. During the process, the technical performance range these new systems offer for the product development will be initially checked and reviewed. For this purpose, various criteria are worked out and the CAD software is evaluated using these criteria. In addition, the criteria are weighted by their importance for design education. This allows one to conclude which capabilities the different CAD system offers for use in education.
Wir haben die erste „Eiserne Hand“ des Götz von Berlichingen mit 3D-Computer-Aided Design rekonstruiert und über einen Multimaterial-3D-Drucker ausgedruckt. Dabei ließ sich feststellen, dass die 500 Jahre alte Technik keinesfalls veraltet ist: Das Innenleben der „Eisernen Hand“ ist ausgefeilter als bisher angenommen. Sie könnte sogar spannende Impulse für die Entwicklung neuer künstlicher Handprothesen liefern.
Fusion 360 – kurz und bündig
(2019)
Dieses Lehrbuch ermöglicht dem Anfänger in der 3D-Modellierung einen schnellen Einstieg in die Arbeit mit dem cloudbasierten CAD-System Autodesk® Fusion 360™. Der Schwerpunkt liegt dabei auf den grundlegenden Funktionen zur Modellierung von Einzelteilen und Produkten, sowie in der Erstellung von einfachen technischen Zeichnungen. Dabei werden bei jedem Schritt die besonderen Anforderungen an eine 3D-Druck-gerechte Gestaltung erläutert und umgesetzt. Somit ist das Ergebnis dieser "Schritt für Schritt"-Anleitung die vollständige Modellierung eines Miniatur-Automobils, das am 3D-Drucker in ein reales Modell umgesetzt werden kann. Das didaktische Konzept ist so ausgelegt, dass alle Schritte für ein Selbststudium geeignet sind.
The additive manufacturing processes have developed significantly in recent years. Currently, new generative processes are coming onto the market. Likewise, the number of available materials that can be processed using additive processes is steadily increasing. Therefore, an important task is to integrate these new processes and materials into the university education of engineers. Due to the rapid change and the constant development in the field of additive manufacturing, a pure transfer of knowledge is not expedient, because this obsolete very quickly. Rather, the students should be enabled to use their skills in such a way that they can always handle new technologies and materials independently and meaningfully.
In this paper, therefore, a new course is developed in which the students largely independently work with additive manufacturing processes. For this purpose, teams of four to five students from different technical programs are formed. The teams have the task of developing and manufacturing a product using additive processes. The goal is to create a powerful product by taking into account the optimization of costs and use of resources.
As an example, the development and additive manufacturing of an ornithopter (aircraft that flies by flapping its wings) will be presented in this contribution. The students have to analyze and optimize the mechanics and aerodynamics of the aircraft. In addition, the rules for production-oriented design must be determined and applied. Further more, they should assess the costs and material consumption during development and production.
This contribution shows how the students have achieved the different learning outcomes. In addition, it becomes clear how the students independently acquired and applied their knowledge in development, design and additive manufacturing. Also, it will be demonstrated how much time the students spent on learning the different technologies.
The development of new processes and materials for additive manufacturing is currently progressing rapidly. In order to use the advantages of additive manufacturing, however, product development and design must also be adapted to these new processes. Therefore it is suitable to use structural optimization. To achieve the best results in lightweight design, it is important to have an approach that reduces the volume in the unloaded regions and considers the restrictions and characteristics of the additive manufacturing process. In this contribution, a case study using a humanoid robot is presented. Thus, the pelvis module of a humanoid robot is optimized regarding its weight and stiffness. Furthermore, an integrated design is implemented in order to reduce the number of parts and the screw connections. The manufacturing uses a new aluminum-based material that has been specially developed for use in additive manufacturing and lightweight construction. For the additive manufacturing by means of the Selective Laser Melting (SLM) process, different restrictions and the assembly concepts of the humanoid robot have to be taken into account. These restrictions have to be considered in the setting of the individual parameters and target functions of the structural optimization. As a result, a framework is presented that shows the steps of the redesign and the optimization of the pelvis module. In order to achieve high accuracy with the product, the redesign of the pelvis module is demonstrated with regard to mechanical and thermal postprocessing. Finally, the redesigned part and the different assembly concepts are compared to analyze the economic and technical effects of the optimization.
Besides of conventional CAD systems, new, cloud-based CAD systems have also been available for some years. These CAD systems designed according to the principle of software as a service (SaaS) differ in some important features from the conventional CAD systems. Thus, these CAD systems are operated via a browser and it is not necessary to install the software on a computer. The CAD-data is stored in the cloud and not on a local computer or central server. This new approach should also facilitate the sharing and management of data. Finally, many of these new CAD systems are available as freeware for education purposes, so the universities can save license costs. This contribution examines newly developed, cloud-based CAD systems. In the context of a case study, the application of these new CAD systems are investigated in the training of engineers in design education. Thus, the students compare a conventional and a cloud-based CAD system as part of an exercise of designing and 3D modelling of a pinion shaft. Subsequently, the students manufacture a drawing with different views of the pinion shaft. This assessment evaluates different criteria such as user-friendliness, tutorial support and installation effort.
The fast and cost-effective manufacturing of tools for thermoforming is an essential requirement to shorten the development time of products. Thus, additive processes are used increasingly in tooling for thermoforming of plastic sheets. However, a disadvantage of many additive methods is that they are highly cost-intensive, since complex systems based on laser technology and expensive metal powders are needed. Therefore, this paper examines how to work with favorable additive methods, e.g. Binder Jetting, to manufacture tools, which provide sufficient strength for thermoforming. The use of comparatively low-priced inkjet technology for the layer construction and a polymer plaster as material can be expected to result in significant cost reductions. Based on a case study using a cowling (engine bonnet) for an Unmanned Aerial Vehicle (UAV), the development of a complex tool for thermoforming is demonstrated. The object in this study is to produce a tool for a complex-shaped component in small numbers and high quality in a short time and at reasonable costs. Within the tooling process, integrated vacuum channels are implemented in additive tooling without the need for additional post-processing (for example, drilling). In addition, special technical challenges, such as the demolding of undercuts or the parting of the tool are explained. All process steps from tool design to the use of the additively manufactured tool are analyzed. Based on the manufacturing of a small series of cowlings for a UAV made of plastic sheets (ABS), it is shown, that the Binder Jetting offers sufficient mechanical and thermal strength for additive tooling. In addition, an economic evaluation of the tool manufacturing and a detailed consideration of the required manufacturing times for the different process steps are carried out. Finally, a comparison is made with conventional and alternative additive methods of tooling.
The ability to change aerodynamic parameters of airfoils during flying can potentially save energy as well as reducing the noise made by the unmanned aerial vehicles (UAV) because of sharp edges of the airfoil and its rudders. In this paper, an approach for the design of an adaptive wing using a multi-material 3D printer is shown. In multi-material 3D printing, up to six different materials can be combined in one component. Thus, the user can determine the mixture and the spatial arrangement of this “digital material” in advance in the pre-processing software. First, the theoretical benefits of adaptive wings are shown, and already existing adaptive wings and concepts are explicated within a literature review. Then the additive manufacturing process using photopolymer jetting and its capabilities to print multiple materials in one part are demonstrated. Within the scope of a case study, an adaptive wing is developed and the necessary steps for the product development and their implementation in CAD are presented. This contribution covers the requirements for different components and sections of an adaptive wing designed for additive manufacturing using multiple materials as well as the single steps of development with its different approaches until the final design of the adaptive wing. The developed wing section is simulated, and qualitative tests in a wind tunnel are carried out with the wing segment. Finally, the additively manufactured wing segment is evaluated under technical and economic aspects.
Direct Digital Manufacturing of Architectural Models using Binder Jetting and Polyjet Modeling
(2019)
Today, architectural models are an important tool for illustrating drawn-on plansor computer-generated virtual models and making them understandable. Inaddition to the conventional methods for the manufacturing of physical models, awide range of processes for Direct Digital Manufacturing (DDM) has spreadrapidly in recent years. In order to facilitate the application of these new methodsfor architects, this contribution examines which technical and economic resultsare possible using 3D printed architectural models. Within a case study, it will beshown on the basis of a multi-storey detached house, which kind of datapreparation is necessary. The DDM of architectural models will be demonstratedusing two widespread techniques and the resulting costs will be compared.
The visualization of heart rhythm disturbance and atrial fibrillation therapy allow the optimization of new cardiac catheter ablations. With the simulation software CST (Computer Simulation Technology, Darmstadt) electromagnetic and thermal simulations can be carried out to analyze and optimize different heart rhythm disturbance and cardiac catheters for pulmonary vein isolation. Another form of visualization is provided by haptic, three-dimensional print models. These models can be produced using an additive manufacturing method, such as a 3D printer. The aim of the study was to produce a 3D print of the Offenburg heart rhythm model with a representation of an atrial fibrillation ablation procedure to improve the visualization of simulation of cardiac catheter ablation.
The basis of 3D printing was the Offenburg heart rhythm model and the associated simulation of cryoablation of the pulmonary vein. The thermal simulation shows the pulmonary vein isolation of the left inferior pulmonary vein with the cryoballoon catheter Arctic Front AdvanceTM from Medtronic. After running through the simulation, the thermal propagation during the procedure was shown in the form of different colors. The three-dimensional print models were constructed on the base of the described simulation in a CAD program. Four different 3D printers are available for this purpose in a rapid prototyping laboratory at the University of Applied Science Offenburg. Two different printing processes were used: 1. a binder jetting printer with polymer gypsum and 2. a multi-material printer with photopolymer. A final print model with additional representation of the esophagus and internal esophagus catheter was also prepared for printing.
With the help of the thermal simulation results and the subsequent evaluation, it was possible to make a conclusion about the propagation of the cold emanating from the catheter in the myocardium and the surrounding tissue. It could be measured that already 3 mm from the balloon surface into the myocardium the temperature drops to 25 °C. The simulation model was printed using two 3D printing methods. Both methods as well as the different printing materials offer different advantages and disadvantages. While the first model made of polymer gypsum can be produced quickly and cheaply, the second model made of photopolymer takes five times longer and was twice as expensive. On the other hand, the second model offers significantly better properties and was more durable overall. All relevant parts, especially the balloon catheter and the conduction, are realistically represented. Only the thermal propagation in the form of different colors is not shown on this model.
Three-dimensional heart rhythm models as well as virtual simulations allow a very good visualization of complex cardiac rhythm therapy and atrial fibrillation treatment methods. The printed models can be used for optimization and demonstration of cryoballoon catheter ablation in patients with atrial fibrillation.
The visualization of heart rhythm disturbance and atrial fibrillation therapy allows the optimization of new cardiac catheter ablations. With the simulation software CST (Computer Simulation Technology, Darmstadt) electromagnetic and thermal simulations can be carried out to analyze and optimize different heart rhythm disturbance and cardiac catheters for pulmonary vein isolation. Another form of visualization is provided by haptic, three-dimensional print models. These models can be produced using an additive manufacturing method, such as a 3d printer. The aim of the study was to produce a 3d print of the Offenburg heart rhythm model with a representation of an atrial fibrillation ablation procedure to improve the visualization of simulation of cardiac catheter ablation. The basis of 3d printing was the Offenburg heart rhythm model and the associated simulation of cryoablation of the pulmonary vein. The thermal simulation shows the pulmonary vein isolation of the left inferior pulmonary vein with the cryoballoon catheter Arctic Front Advance™ from Medtronic. After running through the simulation, the thermal propagation during the procedure was shown in the form of different colors. The three-dimensional print models were constructed on the base of the described simulation in a CAD program. Four different 3d printers are available for this purpose in a rapid prototyping laboratory at the University of Applied Science Offenburg. Two different printing processes were used and a final print model with additional representation of the esophagus and internal esophagus catheter was also prepared for printing. With the help of the thermal simulation results and the subsequent evaluation, it was possible to draw a conclusion about the propagation of the cold emanating from the catheter in the myocardium and the surrounding tissue. It was measured that just 3 mm from the balloon surface into the myocardium the temperature dropped to 25 °C. The simulation model was printed using two 3d printing methods. Both methods, as well as the different printing materials offer different advantages and disadvantages. All relevant parts, especially the balloon catheter and the conduction, are realistically represented. Only the thermal propagation in the form of different colors is not shown on this model. Three-dimensional heart rhythm models as well as virtual simulations allow very clear visualization of complex cardiac rhythm therapy and atrial fibrillation treatment methods. The printed models can be used for optimization and demonstration of cryoballoon catheter ablation in patients with atrial fibrillation.
Additive manufacturing is a rapidly growing manufacturing process for which many new processes and materials are currently being developed. The biggest advantage is that almost any shape can be produced, while conventional manufacturing methods reach their limits. Furthermore, a lot of material is saved because the part is created in layers and only as much material is used as necessary. In contrast, in the case of machining processes, it is not uncommon for more than half of the material to be removed and disposed of. Recently, new additive manufacturing processes have been on the market that enables the manufacturing of components using the FDM process with fiber reinforcement. This opens up new possibilities for optimizing components in terms of their strength and at the same time increasing sustainability by reducing materials consumption and waste. Within the scope of this work, different types of test specimens are to be designed, manufactured and examined. The test specimens are tensile specimens, which are used both for standardized tensile tests and for examining a practical component from automotive engineering used in student project. This project is a vehicle designed to compete in the Shell Eco-marathon, one of the world’s largest energy efficiency competitions. The aim is to design a vehicle that covers a certain distance with as little fuel as possible. Accordingly, it is desirable to manufacture the components with the lowest possible weight, while still ensuring the required rigidity. To achieve this, the use of fiber-reinforced 3D-printed parts is particularly suitable due to the high rigidity. In particular, the joining technology for connecting conventionally and additively manufactured components is developed. As a result, the economic efficiency was assessed, and guidelines for the design of components and joining elements were created. In addition, it could be shown that the additive manufacturing of the component could be implemented faster and more sustainably than the previous conventional manufacturing.
Um medizinische Behandlungsverfahren in der Praxis besser verstehen und anwenden zu können, gewinnt die Visualisierung der Prozesse an immer größerer Bedeutung. Durch Anwendung der Computer-Simulationssoftware CST können elektromagnetische und thermische Simulationen zur Analyse verschiedener Herzrhythmusstörungen durchgeführt werden. Eine weitere Form der Visualisierung erfolgt durch haptische, dreidimensionale Druckmodelle. Diese Modelle können mit einem generativen Herstellungsverfahren, wie z. B. einem 3D-Drucker, in kürzester Zeit hergestellt werden.
The Human-Robot-Collaboration (HRC) has developed rapidly in recent years with the help of collaborative lightweight robots. An important prerequisite for HRC is a safe gripper system. This results in a new field of application in robotics, which spreads mainly in supporting activities in the assembly and in the care. Currently, there are a variety of grippers that show recognizable weaknesses in terms of flexibility, weight, safety and price.
By means of Additive manufacturing (AM) gripper systems can be developed which can be used multifunctionally, manufactured quickly and customized. In addition, the subsequent assembly effort can be reduced due to the integration of several components to a complex component. An important advantage of AM is the new freedom in designing products. Thus, components using lightweight design can be produced. Another advantage is the use of 3D multi-material printing, wherein a component with different material properties and also functions can be realized.
This contribution presents the possibilities of AM considering HRC requirements. First of all, the topic of Human-Robot-Interaction with regard to additive manufacturing will be explained on the basis of a literature review. In addition, the development steps of the HRI gripper through to assembly are explained. The acquired knowledge regarding the AM are especially emphasized here. Furthermore, an application example of the HRC gripper is considered in detail and the gripper and its components are evaluated and optimized with respect to their function. Finally, a technical and economic evaluation is carried out. As a result, it is possible to additively manufacture a multifunctional and customized human-robot collaboration gripping system. Both the costs and the weight were significantly reduced. Due to the low weight of the gripping system only a small amount of about 13% of the load of the robot used is utilized.
Zur Herstellung von Spritzgussformeinsätzen kommen in der Regel spanende Verfahren zum Einsatz. In den letzten Jahren hat sich allerdings auch die additive Herstellung dieser Werkzeuge als zweckmäßig erwiesen. In der Produktentwicklung spielt die Agilität heute eine immer wichtigere Rolle. Um mögliche Potentiale des Additive Tooling im Rahmen des Agile Prototyping und um Unterschiede zu den konventionellen Herstellverfahren aufzuzeigen, werden Angebote für die Fertigung mehrerer Formeinsätze durch eine CNC- und HSC-Fertigung, sowie durch additive Herstellung angefragt und hinsichtlich Beschaffungskosten und -zeiten miteinander verglichen. Zudem erfolgt eine Bewertung der technischen Unterschiede. Aus diesen beiden Betrachtungen kann schließlich ein Profil über die drei Herstellverfahren abgeleitet werden, welches bei der anwendungsfallspezifischen Verfahrensauswahl unterstützen soll.
Fusion 360 – kurz und bündig
(2020)
Dieses Lehrbuch ermöglicht dem Anfänger in der 3D-Modellierung einen schnellen Einstieg in die Arbeit mit dem cloudbasierten CAD-System Autodesk® Fusion 360TM. Der Schwerpunkt liegt dabei auf den grundlegenden Funktionen zur Modellierung von Einzelteilen und dem Zusammenbau von Produkten, sowie in der Erstellung von einfachen technischen Zeichnungen. Dabei werden bei jedem Schritt die besonderen Anforderungen an eine 3D-Druck-gerechte Gestaltung erläutert und umgesetzt. Somit ist das Ergebnis dieser „Schritt für Schritt“-Anleitung die vollständige Modellierung eines Miniatur-Automobils, das am 3D-Drucker in ein reales Modell umgesetzt werden kann. Das didaktische Konzept ist so ausgelegt, dass alle Schritte für ein Selbststudium geeignet sind. Die vorliegende Auflage wurde komplett überarbeitet, sie basiert auf der neuen Benutzeroberfläche User Interface (UI) und enthält ein neues Kapitel zum CNC-Blechbiegen.
Additive manufacturing (AM) or 3D printing (3DP) has become a widespread new technology in recent years and is now used in many areas of industry. At the same time, there is an increasing need for training courses that impart the knowledge required for product development in 3D printing. In this article, a workshop on “Rapid Prototyping” is presented, which is intended to provide students with the technical and creative knowledge for product development in the field of AM. Today, additive manufacturing is an important part of teaching for the training of future engineers. In a detailed literature review, the advantages and disadvantages of previous approaches to training students are examined and analyzed. On this basis, a new approach is developed in which the students analyze and optimize a given product in terms of additivie manufacturing. The students use two different 3D printers to complete this task. In this way, the students acquire the skills to work independently with different processes and materials. With this new approach, the students learn to adapt the design to different manufacturing processes and to observe the restrictions of different materials. The results of these courses are evaluated through feedback in a presentation and a questionnaire.
PROBLEM TO BE SOLVED: To provide a method of producing a robot component, particularly a gripper, the method being capable of being applied multi-functionally and shortening a mounting time to a robot.
SOLUTION: A method of producing a robot component, particularly a finger 5, applied to robotics by a three-dimensional printing method of this invention comes not to require other production processes such as attachment of a cover, etc. with a separate sensor or a material (soft, in many cases), etc., by simultaneously printing at least one sensor 7 by multi-material printing while printing the robot component.
Die Erfindung betrifft ein Verfahren zum 3D-Druck eines Roboterelements, insbesondere eines Fingers 5, zum Einsatz in der Robotik, bei dem mittels Multimaterialdruck wenigstens ein Sensor 7 während des Drucks des Roboterelements mitgedruckt wird. Weiterhin betrifft die Erfindung ein Betätigungs- oder Greifelement, insbesondere Finger 5 für einen Roboter, das durch ein derartiges Verfahren hergestellt wurde.
A method for 3D printing of a robot element, more particularly a finger for use in robotics. At least one sensor is concomitantly printed by means of multi-material printing during the printing of the robot element. A gripping element produced by a method of this kind includes a number of printed layers of robot element material and a concomitantly printed sensor.
Dieses Lehrbuch ermöglicht dem Anfänger in der 3D-Modellierung einen schnellen Einstieg in die Arbeit mit dem cloudbasierten praxisorientierten CAD-System Onshape. Dabei werden bei jedem Schritt die besonderen Anforderungen an eine 3D-Druck-gerechte Gestaltung erläutert und umgesetzt. Somit ist das Ergebnis dieser „Schritt für Schritt“-Anleitung die vollständige Modellierung eines Miniatur-Automobils, das am 3D-Drucker in ein reales Modell umgesetzt werden kann. Die aktuelle Auflage wurde zugunsten besserer Lesbarkeit in ein größeres Format gebracht, die Inhalte wurden neu gegliedert und aktualisiert und um das Kapitel „Blechbauteile für CNC-Biegen" erweitert.
Additive manufacturing (AM) and in particular the application of 3D multi material printing offers completely new production technologies thanks to the degree of freedom in design and the simultaneous processing of several materials in one component. Today's CAD systems for product development are volume-based and therefore cannot adequately implement the multi-material approach. Voxel-based CAD systems offer the advantage that a component can be divided into many voxels and different materials and functions can be assigned to these voxels. In this contribution two voxel-based CAD systems will be analyzed in order to simplify the AM on voxel level with different materials. Thus, a number of suitable criteria for evaluating voxel-based CAD systems are being developed and applied. The results of a technical-economic comparison show the differences between the voxel-based systems and disclose their disadvantages compared to conventional CAD systems. In order to overcome these disadvantages, a new method is therefore presented as an approach that enables the voxelization of a component in a simple way based on a conventional CAD model. The process chain of this new method is demonstrated using a typical component from product design. The results of this implementation of the new method are illustrated and analyzed.
The use of architectural models is a long-proven method for the visualization of designs. More recently, powerful 3D printers have enabled the rapid and cost-effective additive manufacturing (AM) of textured architectural models. The use of AM technology to sample terraced houses in a specific use case (sampling center with more than 1200 customers per year) is examined within this contribution. The aim is to offer customers with limited spatial imagination assistance in the form of detailed architectural models of the whole house, which are divided into different modules. For this purpose, the structure of the terraced house is first analysed and examined for flexible design elements. The implementation of different variants of each floor should serve as a basis for the customer's decision on design and equipment. Thus, the architectural models are additively manufactured using Polyjet modeling. The necessary CAAD-data and interfaces, the technical possibilities and limits of this approach as well as the resulting costs are analyzed. The results of the AM process are evaluated to determine their applicability for the sampling of terraced houses. In addition, the evaluation will show that the additively manufactured architectural models will allow a more precise visualization of the building and thus a faster understanding of the design choices.
As a reaction to the increasing market dynamics and complex requirements, today’s products need to be developed quickly and customized to the customer’s individual needs. In the past, CAD systems are mainly used to visualize the model that the product designer creates. Generative Design shifts the task of the CAD program by actively participating in the shaping process. This results in more design options and the complexity of the shapes and geometries increases significantly. This potential can be optimally exploited through the combination of Generative Design with Additive Manufacturing (AM). Artificial intelligence and the input of target parameters generate geometries, for example, by creating material for stressed areas, which in turn develops biomorphic shapes and thus significantly reduces the consumption of resources. This contribution aims at the evaluation of existing applications in CAD systems for generative design. Special attention is paid to the requirements in design education and easy access for students. For this purpose, three representative CAD systems are selected and analyzed with the help of a comprehensive example of mass reduction. The aim is to perform an individual result analysis in order to assess the application based on various criteria. By using different materials, the influence of the material for the generation is investigated by comparing the material distribution. By comparing the generated models, differences of the CAD systems can be identified and possible fields of application can be presented. By specifying the manufacturing parameters for the generation of the models, the feasibility of AM can be guaranteed without having to modify the results. The physical implementation of the example by means of Fused Deposition Modeling demonstrates this in an exemplary way and examines the interface of the Generative Design and AM. The results of this contribution will enable an evaluation of the different CAD systems for Generative Design according to technical, visual and economic aspects.
Systematische Erfassung von Einflussfaktoren für das Additive Tooling von Spritzgusswerkzeugen
(2021)
Additive tooling is a quick and cost-effective way of producing injection molded products and high fidelity prototypes using the injection molding process. As part of product development, additive tooling is integrated into a complex process. A lack of design and application knowledge represents a barrier in its use. The present work shows how a Design-Structure-Matrix (DSM) can be used to systematically record and analyze influencing factors and their interrelationships. A systematic literature search is carried out to identify the factors and relationships.
In the development of new vehicles, increasing customer comfort requirements and rising safety regulations often result in an increase in weight. Nevertheless, in order to be able to meet the demand for reduced fuel consumption, it is necessary within product development process to implement complex and filigree lightweight structures. This contribution therefore addresses the potential of generatively developed components for fiber-reinforced additive manufacturing (FRAM). Currently, several commercial systems for this application are available on the market. Therefore, a comparison of the systems is first made to determine a suitable system. Then, a highly stressed and safety-relevant chassis component of a race car is generatively designed and manufactured using FRAM. A matrix with short fiber reinforcement and additional long fiber reinforcement with carbon fibers is applied. Finally, tensile tests are carried out to check the mechanical properties. In addition, relevant properties such as weight and cost are obtained in order to be able to compare them with conventionally developed and manufactured components.
The integration of additive manufacturing processes into the teaching of students is an important prerequisite for the further dissemination of this new technology. In this context, the DfAM is of particular importance. For this reason, this paper presents an approach in which a connection is made between methodical product development and practical implementation by AM. Using a model racing car as an example, students independently develop significant improvements of particular assemblies. A final evaluation shows that the students have significantly improved their skills and competencies.
This paper presents a method for supporting the application of Additive Tooling (AT)-based validation environments in integrated product development. Based on a case study, relevant process steps, activities and possible barriers in the realisation of an injection-moulded product are identified and analysed. The aim of the method is to support the target-oriented application of Additive Tooling to obtain physical prototypes at an early stage and to shorten validation cycles.
Additive manufacturing with plastics enables the production of lightweight and resilient components with a high degree of design freedom. In the low-cost sector, Material Extrusion as Fused Layer Modeling (FLM) has so far been the leading method, as it offers simple 3D printers and a variety of inexpensive 3D materials. However, printing times for 6FLM are very long and dimensional accuracy and surface finish are rather poor. Recently, new processes from the field of Vat Polymerization have appeared on the market, such as masked Stereolithography (mSLA), which offer a significant improvement in component quality and build speed at equally favorable machine costs.
This paper therefore analyzes the technical and economic capabilities of the two competing additive processes. For this purpose, the achievable dimensional and surface qualities are determined using a test specimen which represents various important geometry elements. In addition, the machine and material costs are determined and compared with each other. Finally, the resulting environmental impact is determined in the form of the CO2 footprint. In order to optimize the strength of the printed components, material properties of the tensile specimens produced additively with mSLA are determined. The use of ABS-like resins will also be investigated to determine optimal processing settings.
Today, Additive Manufacturing (AM) is an important part of teaching for the education of future engineers. Therefore, a variety of approaches have been developed in recent years on how to bring the design for additive manufacturing (DfAM) into university teaching. In a detailed literature review, the advantages and disadvantages of the previous approaches are considered and analysed. Based on this, an extended approach is presented in which students analyse and optimize a given product with respect to additive manufacturing. In doing so, the students have to solve challenging tasks in optimization in product development with the help of methodical approaches and practically implement their developed solutions with state-of-the-art additive processes. To work on this task, the students have two different 3D printers at their disposal, which work with different processes and materials. Thus, the students learn to adapt the design to different manufacturing processes and to consider the restrictions of different materials. The assessment of the results from this course is done through feedback and a written survey.
For some years now, additive manufacturing (AM) has offered an alternative to conventional manufacturing processes. The strengths of AM are primarily the rapid implementation of ideas into a usable product and the ability to produce geometrically complex shapes. It has also significantly advanced the lightweight design of products made of plastic. So far, the strength of printed components made of polymers is previously very limited.
Recently, new AM processes have become available that allow the embedding of short and also long fibers in polymer matrix. Thus, the manufacturing of components that provide a significant increase in strength becomes possible. In this way, both complex geometries and sophisticated applications can be implemented. This paper therefore investigates how this new technology can be implemented in product development, focusing on sports equipment. An extensive literature research shows that lightweight design plays a decisive role in sports equipment. In addition, the advantages of AM in terms of individualized products and low quantities can be fully exploited.
An example of this approach is the steering system for a seat sled used by paraplegic athletes in the Olympic discipline of Nordic paraskiing. A particular challenge here is the placement and alignment of the long carbon fibers within the polymer matrix and the verification of the strength by means of Finite-Element-Analysis (FEA). In addition, findings from bionics are used to optimize the lightweight design of the steering system. Using this example, it can be shown that the weight of the steering system can be drastically reduced compared to conventional manufacturing. At the same time, a number of parts can be saved through function integration and thus the manufacturing and assembly effort can be reduced significantly.
Additive manufacturing offers completely new production technologies thanks to the layered structure and the simultaneous processing of several materials. In order to exploit the potential of this new technology, it is already necessary in product development to consider the components no longer as monolithic blocks, but as a structure of many layers and individual elements (voxels). Therefore, this paper will examine the current state of voxel-based CAD systems and the subsequent 3D multi-material printing of the designed components. Different voxel-based CAD systems are used and analyzed for component design and a sample component is additively manufactured. The results show that simple components can be designed using voxel-based CAD systems. With the application of 3D multi-material printing, different materials and thus functions can be assigned to the designed voxel-based CAD-model.
Dieses Lehrbuch ermöglicht Anfängern in der 3D-Modellierung einen schnellen Einstieg in die Arbeit mit dem cloudbasierten praxisorientierten CAD-System Onshape. Dabei werden bei jedem Schritt die besonderen Anforderungen an eine 3D-Druck-gerechte Gestaltung erläutert und umgesetzt. Somit ist das Ergebnis dieser „Schritt für Schritt“-Anleitung die vollständige Modellierung eines Miniatur-Automobils, das am 3D-Drucker in ein reales Modell umgesetzt werden kann. Die vorliegende Auflage enthält nun eine Übersicht der 3D-Druckwerkstoffe und geht auf die aktuellen Weiterentwicklungen von Onshape ein. Die neue vereinfachte Anmeldung sowie die Erstellung einer Explosionsdarstellung werden in zwei neuen Kapiteln demonstriert.
Fusion 360 – kurz und bündig
(2022)
Dieses Lehrbuch ermöglicht dem Anfänger in der 3D-Modellierung einen schnellen Einstieg in die Arbeit mit dem cloudbasierten CAD-System Autodesk® Fusion 360TM. Der Schwerpunkt liegt dabei auf den grundlegenden Funktionen zur Modellierung von Einzelteilen und dem Zusammenbau von Produkten, sowie in der Erstellung von einfachen technischen Zeichnungen. Dabei werden bei jedem Schritt die besonderen Anforderungen an eine 3D-Druck-gerechte Gestaltung erläutert und umgesetzt. Somit ist das Ergebnis dieser „Schritt für Schritt“-Anleitung die vollständige Modellierung eines Miniatur-Automobils, das am 3D-Drucker in ein reales Modell umgesetzt werden kann. Das didaktische Konzept ist so ausgelegt, dass alle Schritte für ein Selbststudium geeignet sind.
In der vorliegenden Auflage wurde die Konstruktionsmethodik überarbeitet und einige Kapitel wurden ergänzt, beispielweise um das Erstellen von Teams.
Plastics are used today in many areas of the automotive, aerospace and mechanical engineering industries due to their lightweight potential and ease of processing. Additive manufacturing is applied more and more frequently, as it offers a high degree of design freedom and eliminates the need for complex tools. However, the application of additively manufactured components made of plastics have so far been limited due to their comparatively low strength. For this reason, processes that offer additional reinforcement of the plastic matrix using fibers made of high-strength materials have been developed. However, these components represent a composite of different materials produced on the basis of fossil raw materials, which are difficult to recycle and generally not biodegradable.
Therefore, this paper will explore the potential for new composite materials whose matrix consists of a bio-based plastic. In this investigation, it is assumed that the matrix is reinforced with a fibrous material made of natural fiber to significantly increase the strength. This potential material should offer a lightweight yet strong structure and be biodegradable after use under controlled conditions. Therefore, the state of the art in the use of bio-based materials in 3D printing is first presented. In order to determine the economic boundary conditions, the growth potentials for bio-based materials are analyzed. Also, the recycling prospects for bio-based plastics will also be highlighted. The greenhouse gas emissions and land use to be expected when using bio-based materials are also estimated. Finally, the degradability of the composites is discussed.
In 4D printing an additively manufactured component is given the ability to change its shape or function under the influence of an external stimulus. To achieve this, special smart materials are used that are able to react to external stimuli in a specific way. So far, a number of different stimuli have already been investigated and initial applications have been impressively demonstrated, such as self-folding bodies and simple grippers. However, a methodical specification for the selection of the stimuli and their implementation was not yet in the foreground of the development.
The focus of this work is therefore to develop a methodical approach with which the technology of 4DP can be used in a solution- and application-oriented manner. The developed approach is based on the conventional design methodology for product development to solve given problems in a structured way. This method is extended by specific approaches under consideration of the 4D printing and smart materials.
To illustrate the developed method, it is implemented in practice using a problem definition in the form of an application example. In this example, which represents the recovery of an object from a difficult-to-access environment, the individual functions of positioning, gripping and extraction are implemented using 4D printing. The material extrusion process is used for additive manufacturing of all components of the example. Finally, the functions are successfully tested. The developed approach offers an innovative and methodical approach to systematically solve technical complex problems using 4DP and smart materials.
Additive manufacturing enables the production of lightweight and resilient components with extensive design freedom. In the low-cost sector, material extrusion (e.g. Fused Deposition Modeling - FDM) has been the main method used to date. Thus, robust 3D printers and inexpensive 3D materials (polymer filaments) can be used. However, the printing times for FDM are very long and the quality of the dimensions and surfaces is limited. Recently, new processes from the field of Vat polymerization have entered the market. For example, masked stereolithography (mSLA) offers a significant improvement in component quality and build speed through the use of resins and large-area curing at still reasonable costs. Currently, there is only limited knowledge available on the optimal design of components using this young process. In this contribution, design guidelines are developed to determine the possibilities and limitations of mSLA from a design point of view. For this purpose, a number of test geometries are designed and investigated to obtain systematic insights into important design features, such as wall thickness, grooves and holes. In addition, typical problems in additive manufacturing, such as the design of overhangs and fits or the hollowing of components, are investigated. The evaluation of practical 3D printing tests thus provides important parameters that can be transferred to design guidelines of components for additive manufacturing using mSLA.
In 4D printing, an additively manufactured component is given the ability to change its shape or function in an intended and useful manner over time. The technology of 4D printing is still in an early stage of development. Nevertheless, interesting research and initial applications exist in the literature. In this work, a novel methodical approach is presented that helps transfer existing 4D printing research results and knowledge into solving application tasks systematically. Moreover, two different smart materials are analyzed, used, and combined following the presented methodical approach to solving the given task in the form of recovering an object from a poorly accessible space. This is implemented by self-positioning, grabbing, and extracting the target object. The first smart material used to realize these tasks is a shape-memory polymer, while the second is a polymer-based magnetic composite. In addition to the presentation and detailed implementation of the methodical approach, the potentials and behavior of the two smart materials are further examined and narrowed down as a result of the investigation. The results show that the developed methodical approach contributes to moving 4D printing closer toward a viable alternative to existing technologies due to its problem-oriented nature.
4D printing (4DP) is an evolutionary step of 3D printing, which includes the fourth dimension, in this case the time. In different time steps the printed structure shows different shapes, influenced by external stimuli like light, temperature, pH value, electric or magnetic field. The advantage of 4DP is the solution of technical problems without the need for complex internal energy supply via cables or pipes. Previous approaches to 4D printing with magnetoresponsive materials only use materials with limited usability (e.g. hydrogels) and complex programming during the manufacturing process (e.g. using magnets on the nozzle). The 4D printing using unmagnetized particles and the later magnetization allows the use of a standard 3D printer and has the advantage of being easily reproducible and relatively inexpensive for further application. Therefore, a magnetoresponsive feedstock filament is produced which shows elastic and magnetic properties. In a first step, pellets are produced by compounding polymer with magnetic particles. In a second step, those pellets are extruded in form of filament. This filament is printed using a conventional printing system for Material Extrusion (MEX-TRB/P). Various prototypes have been printed, deformed and magnetized, which is called programming. In comparison to shape memory polymers (SMP) the repeatability of the movement is better. The results show the possibilities of application and function of magnetoresponsive materials. In addition, an understanding of the behaviour of this novel material is achieved.
Due to globalization and the resulting increase in competition on the market, products must be produced more and more cheaply, especially in series production, because buyers expect new variants or even completely new products in ever shorter cycles. Injection molding is the most important production process for manufacturing plastic components in large quantities. However, the conventional production of a mold is extremely time-consuming and costly, which creates a contradiction to the fast pace of the market. Additive tooling is an area of application of additive manufacturing, which in the field of injection molding is preferably used for the prototype production of mold inserts. This allows injection molding tools to be produced faster and more cheaply than through the subtractive manufacturing of metal tools. Material Jetting processes using polymers (MJT-UV/P), also called Polyjet Modeling (PJM), have a great potential for use in additive tooling. Due to the poorer mechanical and thermal properties compared to conventional mold insert materials, e.g. steel or aluminum, the previously used design principles cannot be applied. Accordingly, new design guidelines are necessary, which are developed in this paper. The necessary information is obtained with the help of a systematic literature research. The design guidelines are mapped in a uniform design guide, which is structured according to the design process of injection molds. The guidelines do not only refer to the constructive design of the injection mold or the polymer mold insert, but to the entire design process and describe the four phases of planning, conception, development and realization. Particular attention is paid to the special geometric designs of a polymer mold insert and the thermomechanical properties of the mold insert materials. As a result, design guidelines are available that are adapted to the special requirements of additive tooling of molds inserts made of plastics for injection molding.
Purpose
This study aims to investigate a systematic approach to the production and use of additively manufactured injection mould inserts in product development (PD) processes. For this purpose, an evaluation of the additive tooling design method (ATDM) is performed.
Design/methodology/approach
The evaluation of the ATDM is conducted within student workshops, where students develop products and validate them using AT-prototypes. The evaluation process includes the analysis of work results as well as the use of questionnaires and participant observation.
Findings
This study shows that the ATDM can be successfully used to assist in producing and using AT mould inserts to produce valid AT prototypes. As a reference for the implementation of AT in industrial PD, extracts from the work of the student project groups and suitable process parameters for prototype production are presented.
Originality/value
This paper presents the application and evaluation of a method to support AT in PD that has not yet been scientifically evaluated.