Refine
Document Type
- Conference Proceeding (24)
- Article (reviewed) (13)
- Article (unreviewed) (4)
Conference Type
- Konferenz-Abstract (15)
- Konferenzartikel (6)
- Konferenz-Poster (3)
Is part of the Bibliography
- yes (41)
Keywords
- injury (11)
- Biomechanik (8)
- biomechanics (8)
- running (7)
- ACL (4)
- sport (3)
- anterior cruciate ligament (2)
- change of direction (2)
- cutting (2)
- footwear (2)
Institute
Open Access
- Open Access (30)
- Bronze (17)
- Closed (8)
- Diamond (4)
- Gold (4)
- Closed Access (3)
- Hybrid (3)
High-tech running shoes and spikes ("super-footwear") are currently being debated in sports. There is direct evidence that distance running super shoes improve running economy; however, it is not well established to which extent world-class performances are affected over the range of track and road running events.
This study examined publicly available performance datasets of annual best track and road performances for evidence of potential systematic performance effects following the introduction of super footwear. The analysis was based on the 100 best performances per year for men and women in outdoor events from 2010 to 2022, provided by the world governing body of athletics (World Athletics).
We found evidence of progressing improvements in track and road running performances after the introduction of super distance running shoes in 2016 and super spike technology in 2019. This evidence is more pronounced for distances longer than 1500 m in women and longer than 5000 m in men. Women seem to benefit more from super footwear in distance running events than men.
While the observational study design limits causal inference, this study provides a database on potential systematic performance effects following the introduction of super shoes/spikes in track and road running events in world-class athletes. Further research is needed to examine the underlying mechanisms and, in particular, potential sex differences in the performance effects of super footwear.
Landing heel first has been associated with elevated external knee abduction moments (KAM), thereby potentially increasing the risk of sustaining a non-contact ACL injury. Apart from the foot strike angle, knee valgus angle (VAL) and vertical center of mass velocity at initial ground contact (IC) have been associated with increased KAM in females across different sidestep cuts. While real-time biofeedback training has been proven effective for gait retraining [4], the highly dynamic, non-cyclical nature of cutting maneuvers makes real-time feedback unsuitable and alternative approaches necessary. This study aimed at assessing the efficacy of immediate software-aided feedback on cutting technique in reducing KAM during handball-specific cutting maneuvers.
Bewegungsanalysesysteme in der Forschung und für niedergelassene Orthopädinnen und Orthopäden
(2023)
Hintergrund
Komplexe biomechanische Bewegungsanalysen können für eine Vielzahl orthopädischer Fragestellungen wichtige Informationen liefern. Bei der Beschaffung von Bewegungsanalysesystemen sind neben den klassischen Messgütekriterien (Validität, Reliabilität, Objektivität) auch räumliche und zeitliche Rahmenbedingungen sowie Anforderungen an die Qualifikation des Messpersonals zu berücksichtigen.
Anwendung
In der komplexen Bewegungsanalyse werden Systeme zur Bestimmung der Kinematik, der Kinetik und der Muskelaktivität (Elektromyographie) eingesetzt. Der vorliegende Artikel gibt einen Überblick über Methoden der komplexen biomechanischen Bewegungsanalyse für den Einsatz in der orthopädischen Forschung oder in der individuellen Patientenversorgung. Neben dem Einsatz zur reinen Bewegungsanalyse wird auch der Einsatz von Bewegungsanalyseverfahren im Bereich des Biofeedbacktrainings diskutiert.
Beschaffung
Für die konkrete Anschaffung von Bewegungsanalysesystemen empfiehlt sich die Kontaktaufnahme mit Fachgesellschaften (z. B. Deutsche Gesellschaft für Biomechanik), Hochschulen und Universitäten mit vorhandenen Bewegungsanalyseeinrichtungen oder Vertriebsfirmen im Bereich der Biomechanik.
Background
Internal tibial loading is influenced by modifiable factors with implications for the risk of stress injury. Runners encounter varied surface steepness (gradients) when running outdoors and may adapt their speed according to the gradient. This study aimed to quantify tibial bending moments and stress at the anterior and posterior peripheries when running at different speeds on surfaces of different gradients.
Methods
Twenty recreational runners ran on a treadmill at 3 different speeds (2.5 m/s, 3.0 m/s, and 3.5 m/s) and gradients (level: 0%; uphill: +5%, +10%, and +15%; downhill: –5%, –10%, and –15%). Force and marker data were collected synchronously throughout. Bending moments were estimated at the distal third centroid of the tibia about the medial–lateral axis by ensuring static equilibrium at each 1% of stance. Stress was derived from bending moments at the anterior and posterior peripheries by modeling the tibia as a hollow ellipse. Two-way repeated-measures analysis of variance were conducted using both functional and discrete statistical analyses.
Results
There were significant main effects for running speed and gradient on peak bending moments and peak anterior and posterior stress. Higher running speeds resulted in greater tibial loading. Running uphill at +10% and +15% resulted in greater tibial loading than level running. Running downhill at –10% and –15% resulted in reduced tibial loading compared to level running. There was no difference between +5% or –5% and level running.
Conclusion
Running at faster speeds and uphill on gradients ≥+10% increased internal tibial loading, whereas slower running and downhill running on gradients ≥–10% reduced internal loading. Adapting running speed according to the gradient could be a protective mechanism, providing runners with a strategy to minimize the risk of tibial stress injuries.
Appraising the Methodological Quality of Sports Injury Video Analysis Studies: The QA-SIVAS Scale
(2023)
Background
Video analysis (VA) is commonly used in the assessment of sports injuries and has received considerable research interest. Until now, no tool has been available for the assessment of study quality. Therefore, the objective of this study was to develop and evaluate a valid instrument that reliably assesses the methodological quality of VA studies.
Methods
The Quality Appraisal for Sports Injury Video Analysis Studies (QA-SIVAS) scale was developed using a modified Delphi approach including expert consensus and pilot testing. Reliability was examined through intraclass correlation coefficient (ICC3,1) and free-marginal kappa statistics by three independent raters. Construct validity was investigated by comparing QA-SIVAS with expert ratings by using Kendall’s tau analysis. Rating time was studied by applying the scale to 21 studies and computing the mean time for rating per study article.
Results
The QA-SIVAS scale consists of an 18-item checklist addressing the study design, data source, conduct, report, and discussion of VA studies in sports injury research. Inter- and intra-rater reliability were excellent with ICCs > 0.97. Expert ratings revealed a high construct validity (0.71; p < 0.001). Mean rating time was 10 ± 2 min per article.
Conclusion
QA-SIVAS is a reliable and valid instrument that can be easily applied to sports injury research. Future studies in the field of VA should adhere to standardized methodological criteria and strict quality guidelines.
Injury prevention is essential in running due to the risk of overuse injury development. Tailoring running shoes to individual needs may be a promising strategy to reduce this risk. Novel manufacturing processes allow the production of individualised running shoes that incorporate features that meet individual biomechanical and experiential needs. However, specific ways to individualise footwear to reduce injury risk are poorly understood. Therefore, this scoping review provides an overview of (1) footwear design features that have the potential for individualisation; and (2) the literature on the differential responses to footwear design features between selected groups of individuals. These purposes focus exclusively on reducing the risk of overuse injuries. We included studies in the English language on adults that analysed: (1) potential interaction effects between footwear design features and subgroups of runners or covariates (e.g., age, sex) for running-related biomechanical risk factors or injury incidences; (2) footwear comfort perception for a systematically modified footwear design feature. Most of the included articles (n = 107) analysed male runners. Female runners may be more susceptible to footwear-induced changes and overuse injury development; future research should target more heterogonous sampling. Several footwear design features (e.g., midsole characteristics, upper, outsole profile) show potential for individualisation. However, the literature addressing individualised footwear solutions and the potential to reduce biomechanical risk factors is limited. Future studies should leverage more extensive data collections considering relevant covariates and subgroups while systematically modifying isolated footwear design features to inform footwear individualisation.
Background:
Ankle braces aim to reduce lateral ankle sprains. Next to protection, factors influencing user compliance, such as sports performance, motion restriction, and users’ perceptions, are relevant for user compliance and thus injury prevention. Novel adaptive protection systems claim to change their mechanical behavior based on the intensity of motion (eg, the inversion velocity), unlike traditional passive concepts of ankle bracing.
Purpose:
To compare the performance of a novel adaptive brace with 2 passive ankle braces while considering protection, sports performance, freedom of motion, and subjective perception.
Study Design:
Controlled laboratory study.
Methods:
The authors analyzed 1 adaptive and 2 passive (one lace-up and one rigid brace) ankle braces, worn in a low-cut, indoor sports shoe, which was also the no-brace reference condition. We performed material testing using an artificial ankle joint system at high and low inversion velocities. Further, 20 male, young, healthy team sports athletes were analyzed using 3-dimensional motion analysis in sports-related movements to address protection, sports performance, and active range of motion dimensions. Participants rated subjective comfort, stability, and restriction experienced when using the products.
Results:
Subjective stability rating was not different between the adaptive and passive systems. The rigid brace was superior in restricting peak inversion during the biomechanical testing compared with the passive braces. However, in the material test, the adaptive brace increased its stiffness by approximately 400% during the fast compared with the slow inversion velocities, demonstrating its adaptive behavior and similar stiffness values to passive braces. We identified minor differences in sports performance tasks. The adaptive brace improved active ankle range of motion and subjective comfort and restriction ratings.
Conclusion:
The adaptive brace offered similar protective effects in high-velocity inversion situations to those of the passive braces while improving range of motion, comfort, and restriction rating during noninjurious motions.
Clinical Relevance:
Protection systems are only effective when used. Compared with traditional passive ankle brace technologies, the novel adaptive brace might increase user compliance by improving comfort and freedom of movement while offering similar protection in injurious situations.
The majority of anterior cruciate ligament (ACL) injuries in team sports are non-contact injuries, with cutting maneuvers identified as high-risk tasks. Young female handball players have been shown to be at greater risk for ACL injuries than males. One risk factor for ACL injuries is the magnitude of the knee abduction moment (KAM). Cutting technique variables on foot placement, overall approach and knee kinematics have been shown to influence the KAM. Since injury risk is believed to increase with increasing task complexity, the purpose of the study was to test the effect of task complexity on technique variables that influence the KAM in female handball players during fake-and-cut tasks.
Running shoes were categorized either as motion control, cushioned, or minimal footwear in the past. Today, these categories blur and are not as clearly defined. Moreover, with the advances in manufacturing processes, it is possible to create individualized running shoes that incorporate features that meet individual biomechanical and experiential needs. However, specific ways to individualize footwear to reduce individual injury risk are poorly understood. Therefore, the purpose of this scoping review was to provide an overview of (1) footwear design features that have the potential for individualization; (2) human biomechanical variability as a theoretical foundation for individualization; (3) the literature on the differential responses to footwear design features between selected groups of individuals. These purposes focus exclusively on reducing running-related risk factors for overuse injuries. We included studies in the English language on adults that analyzed: (1) potential interaction effects between footwear design features and subgroups of runners or covariates (e.g., age, gender) for running-related biomechanical risk factors or injury incidences; (2) footwear perception for a systematically modified footwear design feature. Most of the included articles (n = 107) analyzed male runners. Several footwear design features (e.g., midsole characteristics, upper, outsole profile) show potential for individualization. However, the overall body of literature addressing individualized footwear solutions and the potential to reduce biomechanical risk factors is limited. Future studies should leverage more extensive data collections considering relevant covariates and subgroups while systematically modifying isolated footwear design features to inform footwear individualization.
Background: Running overuse injuries (ROIs) occur within a complex, partly injury-specific interplay between training loads and extrinsic and intrinsic risk factors. Biomechanical risk factors (BRFs) are related to the individual running style. While BRFs have been reviewed regarding general ROI risk, no systematic review has addressed BRFs for specific ROIs using a standardized methodology.
Objective: To identify and evaluate the evidence for the most relevant BRFs for ROIs determined during running and to
suggest future research directions.
Design: Systematic review considering prospective and retrospective studies. (PROSPERO_ID: 236,832).
Data Sources: PubMed. Connected Papers. The search was performed in February 2021.
Eligibility Criteria: English language. Studies on participants whose primary sport is running addressing the risk for the seven most common ROIs and at least one kinematic, kinetic (including pressure measurements), or electromyographic BRF. A BRF needed to be identified in at least one prospective or two independent retrospective studies. BRFs needed to be determined during running.
Results: Sixty-six articles fulfilled our eligibility criteria. Levels of evidence for specific ROIs ranged from conflicting to moderate evidence. Running populations and methods applied varied considerably between studies. While some BRFs appeared for several ROIs, most BRFs were specific for a particular ROI. Most BRFs derived from lower-extremity joint kinematics and kinetics were located in the frontal and transverse planes of motion. Further, plantar pressure, vertical ground reaction force loading rate and free moment-related parameters were identified as kinetic BRFs.
Conclusion: This study offers a comprehensive overview of BRFs for the most common ROIs, which might serve as a starting point to develop ROI-specific risk profiles of individual runners. We identified limited evidence for most ROI-specific risk factors, highlighting the need for performing further high-quality studies in the future. However, consensus on data collection standards (including the quantification of workload and stress tolerance variables and the reporting of injuries) is warranted.
The purpose of this study was to describe the effects of running speed and slope on metatarsophalangeal (MTP) joint kinematics. 22 male and female runners underwent 3D motion analysis on an instrumented treadmill at three different speeds (2.5 m/s, 3.0 m/s, 3.5 m/s). At each speed, participants ran at seven slope conditions (downhill: -15%, -10%, -5%, level, and uphill: +5%, +10%, +15%). We found a significant main effect (p < 0.001) of running speed and slope on peak MTP dorsiflexion and a running speed by slope interaction effect (p < 0.001) for peak MTP dorsiflexion velocity. These findings highlight the need to consider running intensity and environmental factors like running surface inclination when considering MTP joint mechanics and technological aids to support runners.
Background: Many countries have restricted public life in order to contain the spread of the novel coronavirus (SARS-CoV2). As a side effect of related measures, physical activity (PA) levels may have decreased.
Objective: We aimed (1) to quantify changes in PA and (2) to identify variables potentially predicting PA reductions.
Methods: A systematic review with random-effects multilevel meta-analysis was performed, pooling the standardized mean differences in PA measures before and during public life restrictions.
Results: A total of 173 trials with moderate methodological quality (modified Downs and Black checklist) were identified. Compared to pre-pandemic, total PA (SMD − 0.65, 95% CI − 1.10 to − 0.21) and walking (SMD − 0.52, 95% CI − 0.29 to − 0.76) decreased while sedentary behavior increased (SMD 0.91, 95% CI: 0.17 to 1.65). Reductions in PA affected all intensities (light: SMD − 0.35, 95% CI − 0.09 to − 0.61, p = .013; moderate: SMD − 0.33, 95% CI − 0.02 to − 0.6; vigorous: SMD − 0.33, − 0.08 to − 0.58, 95% CI − 0.08 to − 0.58) to a similar degree. Moderator analyses revealed no influence of variables such as sex, age, body mass index, or health status. However, the only continent without a PA reduction was Australia and cross-sectional trials yielded higher effect sizes (p < .05).
Conclusion: Public life restrictions associated with the COVID-19 pandemic resulted in moderate reductions in PA levels and large increases in sedentary behavior. Health professionals and policy makers should therefore join forces to develop strategies counteracting the adverse effects of inactivity.
Effect of downhill running on biomechanical risk factors associated with iliotibial band syndrome
(2022)
The purpose of this study was to identify the influence of downhill running on biomechanical risk factors for iliotibial band syndrome. We conducted a 3D motion analysis of 22 females and males running on an instrumented treadmill at four different inclinations (0%, -5%, -10%, -15%) at a speed of 3.5 m/s. We found significant differences for biomechanical risk factors associated with iliotibial band syndrome. Peak knee flexion angle at initial ground contact (p < .001), peak knee adduction angle (p = .005), and iliotibial band strain (p < .001) systematically increased with increasing slope. Downhill running increases biomechanical risk factors for iliotibial band syndrome. Our results highlight the need to consider the individual running environment in assessing overuse injury risk in runners.
Running footwear is continuously being modified and improved; however, running-related overuse injury rates remain high. Nevertheless, novel manufacturing processes enable the production of individualized running shoes that can fit the individual needs of runners, with the potential to reduce injury risk. For this reason, it is essential to investigate functional groups of runners, a collective of runners who respond similarly to a footwear intervention. Therefore, the objective of this study was to develop a framework to identify functional groups based on their individual footwear response regarding injury-specific running-related risk factors for Achilles tendinopathy, Tibial stress fractures, Medial tibial stress syndrome, and Patellofemoral pain syndrome. In this work, we quantified the footwear response patterns of 73 female and male participants when running in three different footwear conditions using unsupervised learning (k-means clustering). For each functional group, we identified the footwear conditions minimizing the injury-specific risk factors. We described differences in the functional groups regarding their running style, anthropometric, footwear perception, and demographics. The results implied that most functional groups showed a tendency for a single footwear condition to reduce most biomechanical risk factors for a specific overuse injury. Functional groups often differed in their hip and pelvis kinematics as well as their subjective rating of the footwear conditions. The footwear intervention only partially affected biomechanical risk factors attributed to more proximal joints. Due to its adaptive nature, the framework could be applied to other footwear interventions or performance-related biomechanical variables.
This study aimed to compare a simplified calculation of the knee abduction moment with the traditional inverse dynamics calculation when athletes perform fake-cut maneuvers with different complexities. In the simplified calculation, we multiply the force vector with its lever arm to the knee, projected onto the local coordinate system of the proximal thigh, hence neglecting the inertial contributions from distal segments. We found very strong ranking consistency using Spearman’s rank correlation coefficient when using the simplified method compared to the traditional calculation. Independent of the tasks, the simplified method resulted in higher moments than the inverse dynamics. This was caused by ignoring the moment caused by segment linear acceleration generating a counteracting moment by about 7%. An alternative to the complex calculations of inverse dynamics can be used to investigate the contributions of the GRF magnitude and its lever arm to the knee.
The purpose of this study was to 1) compare knee joint kinematics and kinetics of fake-and-cut tasks of varying complexity in 51 female handball players and 2) present a case study of one athlete who ruptured her ACL three weeks post data collection. External knee joint moments and knee joint angles in all planes at the instance of the peak external knee abduction moment (KAM) as well as moment and angle time curves were analyzed. Peak KAMs and knee internal rotation moments were substantially higher than published values obtained during simple change-of-direction tasks and, along with flexion angles, differed significantly between the tasks. Introducing a ball reception and a static defender increased joint loads while they partially decreased again when anticipation was lacking. Our results suggest to use game-specific assessments of injury risk while complexity levels do not directly increase knee loading. Extreme values of several risk factors for a post-test injured athlete highlight the need and usefulness of appropriate screenings.
Running stability is the ability to withstand naturally occurring minor perturbations during running. It is susceptible to external and internal running conditions such as footwear or fatigue. However, both its reliable measurability and the extent to which laboratory measurements reflect outdoor running remain unclear. This study aimed to evaluate the intra- and inter-day reliability of the running stability as well as the comparability of different laboratory and outdoor conditions. Competitive runners completed runs on a motorized treadmill in a research laboratory and overground both indoors and outdoors. Running stability was determined as the maximum short-term divergence exponent from the raw gyroscope signals of wearable sensors mounted to four different body locations (sternum, sacrum, tibia, and foot). Sacrum sensor measurements demonstrated the highest reliabilities (good to excellent; ICC = 0.85 to 0.91), while those of the tibia measurements showed the lowest (moderate to good; ICC = 0.55 to 0.89). Treadmill measurements depicted systematically lower values than both overground conditions for all sensor locations (relative bias = -9.8% to -2.9%). The two overground conditions, however, showed high agreement (relative bias = -0.3% to 0.5%; relative limits of agreement = 9.2% to 15.4%). Our results imply moderate to excellent reliability for both overground and treadmill running, which is the foundation of further research on running stability.
Non-contact anterior cruciate ligament injuries typically occur during cutting maneuvers and are associated with high peak knee abduction moments (KAM) within early stance. To screen athletes for injury risk or quantify the efficacy of prevention programs, it may be necessary to design tasks that mimic game situations. Thus, this study compared KAMs and ranking consistency of female handball players in three sport-specific fake-and-cut tasks of increasing complexity. The biomechanics of female handball players (n = 51, mean ± SD: 66.9 ± 7.8 kg, 1.74 ± 0.06 m, 19.2 ± 3.4 years) were recorded with a 3D motion capture system and force plates during three standardized fake-and-cut tasks. Task 1 was designed as a simple pre-planned cut, task 2 included catching a ball before a pre-planned cut in front of a static defender, and task 3 was designed as an unanticipated cut with three dynamic defenders involved. Inverse dynamics were used to calculate peak KAM within the first 100 ms of stance. KAM was decomposed into the frontal plane knee joint moment arm and resultant ground reaction force. RANOVAs (α ≤ 0.05) were used to reveal differences in the KAM magnitudes, moment arm, and resultant ground reaction force for the three tasks. Spearman's rank correlations were calculated to test the ranking consistency of the athletes' KAMs. There was a significant task main effect on KAM (p = 0.02; ηp2 = 0.13). The KAM in the two complex tasks was significantly higher (task 2: 1.73 Nm/kg; task 3: 1.64 Nm/kg) than the KAM in the simplest task (task 1: 1.52 Nm/kg). The ranking of the peak KAM was consistent regardless of the task complexity. Comparing tasks 1 and 2, an increase in KAM resulted from an increased frontal plane moment arm. Comparing tasks 1 and 3, higher KAM in task 3 resulted from an interplay between both moment arm and the resultant ground reaction force. In contrast to previous studies, unanticipated cutting maneuvers did not produce the highest KAMs. These findings indicate that the players have developed an automated sport-specific cutting technique that is utilized in both pre-planned and unanticipated fake-and-cut tasks.
Young female handball players represent a high-risk population for anterior cruciate ligament (ACL) injuries. While the external knee abduction moment (KAM) is known to be a risk factor, it is unclear how cutting technique affects KAMs in sport-specific cutting maneuvers. Further, the effect of added game specificity (e.g., catching a ball or faking defenders) on KAMs and cutting technique remains unknown. Therefore, this study aimed: (i) to test if athletes grouped into different clusters of peak KAMs produced during three sport-specific fake-and-cut tasks of different complexities differ in cutting technique, and (ii) to test whether technique variables change with task complexity. Fifty-one female handball players (67.0 ± 7.7 kg, 1.70 ± 0.06 m, 19.2 ± 3.4 years) were recruited. Athletes performed at least five successful handball-specific sidestep cuts of three different complexities ranging from simple pre-planned fake-and-cut maneuvers to catching a ball and performing an unanticipated fake-and-cut maneuver with dynamic defenders. A k-means cluster algorithm with squared Euclidean distance metric was applied to the KAMs of all three tasks. The optimal cluster number of koptimal = 2 was calculated using the average silhouette width. Statistical differences in technique variables between the two clusters and the tasks were analyzed using repeated-measures ANOVAs (task complexity) with nested groupings (clusters). KAMs differed by 64.5%, on average, between clusters. When pooling all tasks, athletes with high KAMs showed 3.4° more knee valgus, 16.9% higher downward and 8.4% higher resultant velocity at initial ground contact, and 20.5% higher vertical ground reaction forces at peak KAM. Unlike most other variables, knee valgus angle was not affected by task complexity, likely due to it being part of inherent movement strategies and partly determined by anatomy. Since the high KAM cluster showed higher vertical center of mass excursions and knee valgus angles in all tasks, it is likely that this is part of an automated motor program developed over the players' careers. Based on these results, reducing knee valgus and downward velocity bears the potential to mitigate knee joint loading and therefore ACL injury risk.
Objective: To identify and evaluate the evidence of the most relevant running-related risk factors (RRRFs) for running-related overuse injuries (ROIs) and to suggest future research directions.
Design: Systematic review considering prospective and retrospective studies. (PROSPERO_ID: 236832)
Data sources: Pubmed. Connected Papers. The search was performed in February 2021.
Eligibility criteria: English language. Studies on participants whose primary sport is running addressing the risk for the seven most common ROIs and at least one kinematic, kinetic (including pressure measurements), or electromyographic RRRF. An RRRF needed to be identified in at least one prospective or two retrospective studies.
Results: Sixty-two articles fulfilled our eligibility criteria. Levels of evidence for specific ROIs ranged from conflicting to moderate evidence. Running populations and methods applied varied considerably between studies. While some RRRFs appeared for several ROIs, most RRRFs were specific for a particular ROI. The biomechanical measurements performed in many studies would have allowed for consideration of many more RRRFs than have been reported, highlighting a potential for more effective data usage in the future.
Conclusion: This study offers a comprehensive overview of RRRFs for the most common ROIs, which might serve as a starting point to develop ROI-specific risk profiles of individual runners. Future work should use macroscopic (big data) approaches involving long-term data collections in the real world and microscopic approaches involving precise stress calculations using recent developments in biomechanical modelling. However, consensus on data collection standards (including the quantification of workload and stress tolerance variables and the reporting of injuries) is warranted.
This study aims to investigate the individual response concerning BRFs for AT when the mid-sole hardness underneath the rearfoot was systematically altered. We first identified FGs based on the footwear condition that minimised the risk for AT across BRFs. We then tested the FGs for differences in anthropometrics, footwear comfort, and running characteristics.
Quantifying the midsole material characteristics of athletic footwear is a standard task in footwear research and development. Current material testing protocols primarily focus on the determination of cushioning properties of the heel region or the quantification of the midsole properties as one assembly. However, midsoles possess different spatial material properties that have not been quantified from previous methodologies. Therefore, new material testing methods are required to quantify the local material response of athletic footwear. We developed a cyclical force-controlled material testing protocol for the determination of non-homogeneously distributed material stiffness with a high spatial resolution. In five prototype shoes varying in their stiffness distribution, we found that the material properties can be reliably measured across the midsole. Furthermore, we observed a characteristic non-linear material response regardless of the midsole location. We found that the material stiffness increased with an increase of the applied force and that this effect is further intensified by higher testing cycles. Additionally, the obtained midsole stiffness depends on the geometry of the midsole. We explored different approaches to reduce the measurement time of the testing protocol and found that the number of measurements can be reduced by 70% using 2 D-interpolation procedures. Determining the spatial material properties of midsoles needs to be considered to understand foot-shoe interactions. Furthermore, this measurement protocol can be used for quality control within the footwear and can be adapted for considering the effects of different running styles or speeds on ground force application characteristics.
Treadmills are essential to the study of human and animal locomotion as well as for applied diagnostics in both sports and medicine. The quantification of relevant biomechanical and physiological variables requires a precise regulation of treadmill belt velocity (TBV). Here, we present a novel method for time-efficient tracking of TBV using standard 3D motion capture technology. Further, we analyzed TBV fluctuations of four different treadmills as seven participants walked and ran at target speeds ranging from 1.0 to 4.5 m/s. Using the novel method, we show that TBV regulation differs between treadmill types, and that certain features of TBV regulation are affected by the subjects’ body mass and their locomotion speed. With higher body mass, the TBV reductions in the braking phase of stance became higher, even though this relationship differed between locomotion speeds and treadmill type (significant body mass × speed × treadmill type interaction). Average belt speeds varied between about 98 and 103% of the target speed. For three of the four treadmills, TBV reduction during the stance phase of running was more intense (> 5% target speed) and occurred earlier (before 50% of stance phase) unlike the typical overground center of mass velocity patterns reported in the literature. Overall, the results of this study emphasize the importance of monitoring TBV during locomotor research and applied diagnostics. We provide a novel method that is freely accessible on Matlab’s file exchange server (“getBeltVelocity.m”) allowing TBV tracking to become standard practice in locomotion research.