Refine
Document Type
Conference Type
Language
- English (3)
Is part of the Bibliography
- yes (3)
Keywords
- Lithium-ion battery (3) (remove)
Institute
Open Access
- Open Access (2)
- Gold (1)
Batteries typically consist of multiple individual cells connected in series. Here we demonstrate single-cell state of charge (SOC) and state of health (SOH) diagnosis in a 24 V class lithium-ion battery. To this goal, we introduce and apply a novel, highly efficient algorithm based on a voltage-controlled model (VCM). The battery, consisting of eight single cells, is cycled over a duration of five months under a simple cycling protocol between 20 % and 100 % SOC. The cell-to-cell standard deviations obtained with the novel algorithm were 1.25 SOC-% and 1.07 SOH-% at beginning of cycling. A cell-averaged capacity loss of 9.9 % after five months cycling was observed. While the accuracy of single-cell SOC estimation was limited (probably owed to the flat voltage characteristics of the lithium iron phosphate, LFP, chemistry investigated here), single-cell SOH estimation showed a high accuracy (2.09 SOH-% mean absolute error compared to laboratory reference tests). Because the algorithm does not require observers, filters, or neural networks, it is computationally very efficient (three seconds analysis time for the complete data set consisting of eight cells with approx. 780.000 measurement points per cell).
Modeling and simulation play a key role in analyzing the complex electrochemical behavior of lithium-ion batteries. We present the development of a thermodynamic and kinetic modeling framework for intercalation electrochemistry within the open-source software Cantera. Instead of using equilibrium potentials and single-step Butler-Volmer kinetics, Cantera is based on molar thermodynamic data and mass-action kinetics, providing a physically-based and flexible means for complex reaction pathways. Herein, we introduce a new thermodynamic class for intercalation materials into the open-source software. We discuss the derivation of molar thermodynamic data from experimental half-cell potentials, and provide practical guidelines. We then demonstrate the new class using a single-particle model of a lithium cobalt oxide/graphite lithium-ion cell, implemented in MATLAB. With the present extensions, Cantera provides a platform for the lithium-ion battery modeling community both for consistent thermodynamic and kinetic models and for exchanging the required thermodynamic and kinetic parameters. We provide the full MATLAB code and parameter files as supplementary material to this article.