Refine
Document Type
- Conference Proceeding (52)
- Article (reviewed) (6)
- Part of a Book (5)
- Patent (3)
- Report (2)
- Article (unreviewed) (1)
Conference Type
- Konferenzartikel (52)
Has Fulltext
- no (69) (remove)
Is part of the Bibliography
- yes (69)
Keywords
- Security (3)
- Bearings (2)
- Blockchain (2)
- IoT security (2)
- NB-IoT (2)
- Predictive Maintenance (2)
- Predictive maintenance (2)
- certificate management (2)
- cryptography (2)
- physical unclonable function (2)
Institute
- Fakultät Elektrotechnik, Medizintechnik und Informatik (EMI) (ab 04/2019) (69) (remove)
Open Access
- Closed Access (37)
- Closed (22)
- Open Access (8)
- Bronze (2)
- Diamond (2)
- Gold (1)
Wireless sensor networks have found their way into a wide range of applications, among which environmental monitoring systems have attracted increasing interests of researchers. Main challenges for these applications are scalability of the network size and energy efficiency of the spatially distributed nodes. Nodes are mostly battery-powered and spend most of their energy budget on the radio transceiver module. In normal operation modes most energy is spent waiting for incoming frames. A so-called Wake-On-Radio (WOR) technology helps to optimize trade-offs between energy consumption, communication range, complexity of the implementation and response time. We already proposed a new protocol called SmartMAC that makes use of such WOR technology. Furthermore, it gives the possibility to balance the energy consumption between sender and receiver nodes depending on the use case. Based on several calculations and simulations, it was predicted that the SmartMAC protocol was significantly more efficient than other schemes being proposed in recent publications, while preserving a certain backward compatibility with standard IEEE802.15.4 transceivers. To verify this prediction, we implemented the SmartMAC protocol for a given hardware platform. This paper compares the realtime performance of the SmartMAC protocol against simulation results, and proves the measured values are very close to the estimated values. Thus we believe that the proposed MAC algorithms outperforms all other Wake-on-Radio MACs.
When designing and installing Indoor Positioning Systems, several interrelated tasks have to be solved to find an optimum placement of the Access Points. For this purpose, a mathematical model for a predefined number of access points indoors is presented. Two iterative algorithms for the minimization of localization error of a mobile object are described. Both algorithms use local search technique and signal level probabilities. Previously registered signal strengths maps were used in computer simulation.
Narrowband IoT (NB-IoT) as a radio access technology for the cellular Internet of Things (cIoT) is getting more traction due to attractive system parameters, new proposals in the 3 rd Generation Partnership Project (3GPP) Release 14 for reduced power consumption and ongoing world-wide deployment. As per 3GPP, the low-power and wide-area use cases in 5G specification will be addressed by the early NB-IoT and Long-Term Evolution for Machines (LTE-M) based technologies. Since these cIoT networks will operate in a spatially distributed environment, there are various challenges to be addressed for tests and measurements of these networks. To meet these requirements, unified emulated and field testbeds for NB-IoT-networks were developed and used for extensive performance measurements. This paper analyses the results of these measurements with regard to RF coverage, signal quality, latency, and protocol consistency.
The monitoring of industrial environments ensures that highly automated processes run without interruption. However, even if the industrial machines themselves are monitored, the communication lines are currently not continuously monitored in todays installations. They are checked usually only during maintenance intervals or in case of error. In addition, the cables or connected machines usually have to be removed from the system for the duration of the test. To overcome these drawbacks, we have developed and implemented a cost-efficient and continuous signal monitoring of Ethernet-based industrial bus systems. Several methods have been developed to assess the quality of the cable. These methods can be classified to either passive or active. Active methods are not suitable if interruption of the communication is undesired. Passive methods, on the other hand, require oversampling, which calls for expensive hardware. In this paper, a novel passive method combined with undersampling targeting cost-efficient hardware is proposed.
Enabling ultra-low latency is one of the major drivers for the development of future cellular networks to support delay sensitive applications including factory automation, autonomous vehicles and tactile internet. Narrowband Internet of Things (NB-IoT) is a 3 rd Generation Partnership Project (3GPP) Release 13 standardized cellular network currently optimized for massive Machine Type Communication (mMTC). To reduce the latency in cellular networks, 3GPP has proposed some latency reduction techniques that include Semi Persistent Scheduling (SPS) and short Transmission Time Interval (sTTI). In this paper, we investigate the potential of adopting both techniques in NB-IoT networks and provide a comprehensive performance evaluation. We firstly analyze these techniques and then implement them in an open-source network simulator (NS3). Simulations are performed with a focus on Cat-NB1 User Equipment (UE) category to evaluate the uplink user-plane latency. Our results show that SPS and sTTI have the potential to greatly reduce the latency in NB-IoT systems. We believe that both techniques can be integrated into NB-IoT systems to position NB-IoT as a preferred technology for low data rate Ultra-Reliable Low-Latency Communication (URLLC) applications before 5G has been fully rolled out.
With the surge in global data consumption with proliferation of Internet of Things (IoT), remote monitoring and control is increasingly becoming popular with a wide range of applications from emergency response in remote regions to monitoring of environmental parameters. Mesh networks are being employed to alleviate a number of issues associated with single-hop communication such as low area coverage, reliability, range and high energy consumption. Low-power Wireless Personal Area Networks (LoWPANs) are being used to help realize and permeate the applicability of IoT. In this paper, we present the design and test of IEEE 802.15.4-compliant smart IoT nodes with multi-hop routing. We first discuss the features of the software stack and design choices in hardware that resulted in high RF output power and then present field test results of different baseline network topologies in both rural and urban settings to demonstrate the deployability and scalability of our solution.
A physical unclonable function (PUF) is a hardware circuit that produces a random sequence based on its manufacturing-induced intrinsic characteristics. In the past decade, silicon-based PUFs have been extensively studied as a security primitive for identification and authentication. The emerging field of printed electronics (PE) enables novel application fields in the scope of the Internet of Things (IoT) and smart sensors. In this paper, we design and evaluate a printed differential circuit PUF (DiffC-PUF). The simulation data are verified by Monte Carlo analysis. Our design is highly scalable while consisting of a low number of printed transistors. Furthermore, we investigate the best operating point by varying the PUF challenge configuration and analyzing the PUF security metrics in order to achieve high robustness. At the best operating point, the results show areliability of 98.37% and a uniqueness of 50.02%, respectively. This analysis also provides useful and comprehensive insights into the design of hybrid or fully printed PUF circuits. In addition, the proposed printed DiffC-PUF core has been fabricated with electrolyte-gated field-effect transistor technology to verify our design in hardware.
This article deals with the problem of wireless synchronization between onboard computing devices of small-sized unmanned aerial vehicles (SUAV) equipped with integrated wireless chips (IWC). Accurate synchronization between several devices requires the precise timestamping of batches transmitting and receiving on each of them. The best precision is demonstrated by those solutions where timestamping is performed on the PHY level, right after modulation/demodulation of the batch. Nowadays, most of the currently produced IWC are Systems-on-a-Chip (SoC) that include both PHY and MAC, implemented with one or several processor cores application. SoC allows create more cost and energy efficient wireless devices. At the same time, it limits the developers direct access to the internal signals and significantly complicates precise timestamping for sent and received batches, required for mutual synchronization of industrial devices. Some modern IEEE 802.11 IWCs have inbuilt functions that use internal chip clock to register timestamps. However, high jitter of the interfaces between the external device and IWC degrades the comparison of the timestamps from the internal clock to those registered by external devices. To solve this problem, the article proposes a novel approach to the synchronization, based on the analysis of IWC receiver input potential. The benefit of this approach is that there is no need to demodulate and decode the received batches, thus allowing it implementation with low-cost IWCs. In this araticle, Cypress CYW43438 was taken as an example for designing hardware and software solutions for synchronization between two SUAV onboard computing devices, equipped with IWC. The results of the performed experimental studies reveal that mutual synchronization error of the proposed method does not exceed 10 μs.
Low latency communication is essential to enable mission-critical machine-type communication (mMTC) use cases in cellular networks. Factory and process automation are major areas that require such low latency communication. In this paper, we investigate the potential of adopting the semi-persistent scheduling (SPS) latency reduction technique in narrowband LTE (NB-LTE) networks and provide a comprehensive performance evaluation. First, we investigate and implement SPS in an open-source network simulator (NS3). We perform simulations with a focus on LTE-M and Narrowband IoT (NB-IoT) systems and evaluate the impact of the SPS technique on the uplink latency of these narrowband systems in real industrial automation scenarios. The performance gain of adopting SPS is analyzed and the results is compared with the legacy dynamic scheduling. Our results show that SPS has the potential to reduce the latency of cellular Internet of Things (cIoT) networks. We believe that SPS can be integrated into LTE-M and NB-IoT systems to support low-latency industrial applications.
The Internet of Things (IoT) application has becoming progressively in-demand, most notably for the embedded devices (ED). However, each device has its own difference in computational capabilities, memory usage, and energy resources in connecting to the Internet by using Wireless Sensor Networks (WSNs). In order for this to be achievable, the WSNs that form the bulk of the IoT implementation requires a new set of technologies and protocol that would have a defined area, in which it addresses. Thus, IPv6 Low Power Area Network (6LoWPAN) was designed by the Internet Engineering Task Force (IETF) as a standard network for ED. Nevertheless, the communication between ED and 6LoWPAN requires appropriate routing protocols for it to achieve the efficient Quality of Service (QoS). Among the protocols of 6LoWPAN network, RPL is considered to be the best protocol, however its Energy Consumption (EC) and Routing Overhead (RO) is considerably high when it is implemented in a large network. Therefore, this paper would propose the HRPL to enchance the RPL protocol in reducing the EC and RO. In this study, the researchers would present the performance of RPL and HRPL in terms of EC, Control traffic Overhead (CTO) and latency based on the simulation of the 6LoWPAN network in fixed environment using COOJA simulator. The results show HRPL protocol achieves better performance in all the tested topology in terms of EC and CTO. However, the latency of HRPL only improves in chain topology compared with RPL. We found that further research is required to study the relationship between the latency and the load of packet transmission in order to optimize the EC usage.
Formal Description of Use Cases for Industry 4.0 Maintenance Processes Using Blockchain Technology
(2019)
Maintenance processes in Industry 4.0 applications try to achieve a high degree of quality to reduce the downtime of machinery. The monitoring of executed maintenance activities is challenging as in complex production setups, multiple stakeholders are involved. So, full transparency of the different activities and of the state of the machine can only be supported, if these stakeholders trust each other. Therefore, distributed ledger technologies, like Blockchain, can be promising candidates for supporting such applications. The goal of this paper is a formal description of business and technical interactions between non-trustful stakeholders in the context of Industry 4.0 maintenance processes using distributed ledger technologies. It also covers the integration of smart contracts for automated triggering of activities.
Time-Sensitive Networking (TSN) is the most promising time-deterministic wired communication approach for industrial applications. To extend TSN to "IEEE 802.11" wireless networks two challenging problems must be solved: synchronization and scheduling. This paper is focused on the first one. Even though a few solutions already meet the required synchronization accuracies, they are built on expensive hardware that is not suited for mass market products. While next Wi-Fi generation might support the required functionalities, this paper proposes a novel method that makes possible high-precision wireless synchronization using commercial low-cost components. With the proposed solution, a standard deviation of synchronization error of less than 500 ns can be achieved for many use cases and system loads on both CPU and network. This performance is comparable to modern wired real-time field busses, which makes the developed method a significant contribution for the extension of the TSN protocol to the wireless domain.
This paper presents a novel low-jitter interface between a low-cost integrated IEEE802.11 chip and a FPGA. It is designed to be part of system hardware for ultra-precise synchronization between wireless stations. On physical level, it uses Wi-Fi chip coexistence signal lines and UART frame encoding. On its basis, we propose an efficient communication protocol providing precise timestamping of incoming frames and internal diagnostic mechanisms for detecting communication faults. Meanwhile it is simple enough to be implemented both in low-cost FPGA and commodity IEEE802.11 chip firmware. The results of computer simulation shows that developed FPGA implementation of the proposed protocol can precisely timestamp incoming frames as well as detect most of communication errors even in conditions of high interference. The probability of undetected errors was investigated. The results of this analysis are significant for the development of novel wireless synchronization hardware.
The development of Internet of Things (IoT) embedded devices is proliferating, especially in the smart home automation system. However, the devices unfortunately are imposing overhead on the IoT network. Thus, the Internet Engineering Task Force (IETF) have introduced the IPv6 Low-Power Wireless Personal Area Network (6LoWPAN) to provide a solution to this constraint. 6LoWPAN is an Internet Protocol (IP) based communication where it allows each device to connect to the Internet directly. As a result, the power consumption is reduced. However, the limitation of data transmission frame size of the IPv6 Routing Protocol for Low-power and Lossy Network’s (RPL’s) had made it to be the running overhead, and thus consequently degrades the performance of the network in terms of Quality of Service (QoS), especially in a large network. Therefore, HRPL was developed to enhance the RPL protocol to minimize redundant retransmission that causes the routing overhead. We introduced the T-Cut Off Delay to set the limit of the delay and the H field to respond to actions taken within the T-Cut Off Delay. Thus, this paper presents the comparison performance assessment of HRPL between simulation and real-world scenarios (6LoWPAN Smart Home System (6LoSH) testbed) in validating the HRPL functionalities. Our results show that HRPL had successfully reduced the routing overhead when implemented in 6LoSH. The observed Control Traffic Overhead (CTO) packet difference between each experiment is 7.1%, and the convergence time is 9.3%. Further research is recommended to be conducted for these metrics: latency, Packet Delivery Ratio (PDR), and throughput.
The authentication method of electronic devices, based on individual forms of correlograms of their internal electric noises, is well-known. Specific physical differences in the components – for example, caused by variations in production quality – cause specific electrical signals, i.e. electric noise, in the electronic device. It is possible to obtain this information and to identify the specific differences of the individual devices using an embedded analog-to-digital converter (ADC). These investigations confirm the possibility to identify and authenticate electronic devices using bit templates, calculated from the sequence of values of the normalized autocorrelation function of noise. Experiments have been performed using personal computers. The probability of correct identification and authentication increases with increasing noise recording duration. As a result of these experiments, an accuracy of 98.1% was achieved for a 1 second-long registration of EM for a set of investigated computers.
Time Sensitive Networking (TSN) provides mechanisms to enable deterministic and real-time networking in industrial networks. Configuration of these mechanisms is key to fully deploy and integrate TSN in the networks. The IEEE 802.1 Qcc standard has proposed different configuration models to implement a TSN configuration. Up until now, TSN and its configuration have been explored mostly for Ethernet-based industrial networks. However, they are still considered “work-in-progress” for wireless networks. This work focuses on the fully centralized model and describes a generic concept to enable the configuration of TSN mechanisms in wireless industrial networks. To this end, a configuration entity is implemented to conFigure the wireless end stations to satisfy their requirements. The proposed solution is then validated with the Digital Enhanced Cordless Telecommunication ultra-low energy (DECT ULE) wireless communication protocol.
With the increasing degree of interconnectivity in industrial factories, security becomes more and more the most important stepping-stone towards wide adoption of the Industrial Internet of Things (IIoT). This paper summarizes the most important aspects of one keynote of DESSERT2020 conference. It highlights the ongoing and open research activities on the different levels, from novel cryptographic algorithms over security protocol integration and testing to security architectures for the full lifetime of devices and systems. It includes an overview of the research activities at the authors' institute.
RETIS – Real-Time Sensitive Wireless Communication Solution for Industrial Control Applications
(2020)
Ultra-Reliable Low Latency Communications (URLLC) has been always a vital component of many industrial applications. The paper proposes a new wireless URLLC solution called RETIS, which is suitable for factory automation and fast process control applications, where low latency, low jitter, and high data exchange rates are mandatory. In the paper, we describe the communication protocol as well as the hardware structure of the network nodes for implementing the required functionality. Many techniques enabling fast, reliable wireless transmissions are used – short Transmission Time Interval (TTI), Time-Division Multiple Access (TDMA), MIMO, optional duplicated data transfer, Forward Error Correction (FEC), ACK mechanism. Preliminary tests show that reliable end-to-end latency down to 350 μs and packet exchange rate up to 4 kHz can be reached (using quadruple MIMO and standard IEEE 802.15.4 PHY at 250 kbit/s).
Novel manufacturing technologies, such as printed electronics, may enable future applications for the Internet of Everything like large-area sensor devices, disposable security, and identification tags. Printed physically unclonable functions (PUFs) are promising candidates to be embedded as hardware security keys into lightweight identification devices. We investigate hybrid PUFs based on a printed PUF core. The statistics on the intra- and inter-hamming distance distributions indicate a performance suitable for identification purposes. Our evaluations are based on statistical simulations of the PUF core circuit and the thereof generated challenge-response pairs. The analysis shows that hardware-intrinsic security features can be realized with printed lightweight devices.
During the day-to-day exploitation of localization systems in mines, the technical staff tends to incorrectly rearrange radio equipment: positions of devices may not be accurately marked on a map or their positions may not correspond to the truth. This situation may lead to positioning inaccuracies and errors in the operation of the localization system.This paper presents two Bayesian algorithms for the automatic corrections of positions of the equipment on the map using trajectories restored by the inertial measurement units mounted to mobile objects, like pedestrians and vehicles. As a basis, a predefined map of the mine represented as undirected weighted graph was used as input. The algorithms were implemented using the Simultaneous Localization and Mapping (SLAM) approach.The results prove that both methods are capable to detect misplacement of access points and to provide corresponding corrections. The discrete Bayesian filter outperforms the unscented Kalman filter, which, however, requires more computational power.
Wireless synchronization of industrial controllers is a challenging task in environments where wired solutions are not practical. The best solutions proposed so far to solve this problem require pretty expensive and highly specialized FPGA-based devices. With this work we counter the trend by introducing a straightforward approach to synchronize a fairly cheap IEEE 802.11 integrated wireless chip (IWC) with external devices. More specifically we demonstrate how we can reprogram the software running in the 802.11 IWC of the Raspberry Pi 3B and transform the receiver input potential of the wireless transceiver into a triggering signal for an external inexpensive FPGA. Experimental results show a mean-square synchronization error of less than 496 ns, while the absolute synchronization error does not exceed 6 μs. The jitter of the output signal that we obtain after synchronizing the clock of the external device did not exceed 5.2 μs throughout the whole measurement campaign. Even though we do not score new records in term of accuracy, we do in terms of complexity, cost, and availability of the required components: all these factors make the proposed technique a very promising of the deployment of large-scale low-cost automation solutions.
Wireless communication technologies play a major role to enable megatrends like Internet of Things (IoT) and Industry 4.0. The Narrowband Wireless WAN (NBWWAN) introduced to meet the long range and low power requirements of spatially distributed wireless communication use cases. These networks introduce additional challenges in testing because the network topology and RF characteristics become particularly complex and thus a multitude of different scenarios must be tested. This paper describes the infrastructure for automated testing of radio communication and for systematic measurements of the network performance of NBWWAN.
One of the main requirements of spatially distributed Internet of Things (IoT) solutions is to have networks with wider coverage to connect many low-power devices. Low-Power Wide-Area Networks (LPWAN) and Cellular IoT(cIOT) networks are promising candidates in this space. LPWAN approaches are based on enhanced physical layer (PHY) implementations to achieve long range such as LoRaWAN, SigFox, MIOTY. Narrowband versions of cellular network offer reduced bandwidth and, simplified node and network management mechanisms, such as Narrow Band IoT (NB-IoT) and Long-Term Evolution for Machines (LTE-M). Since the underlying use cases come with various requirements it is essential to perform a comparative analysis of competing technologies. This article provides systematic performance measurement and comparison of LPWAN and NB-IoT technologies in a unified testbed, also discusses the necessity of future fifth generation (5G) LPWAN solutions.
Modeling of Random Variations in a Switched Capacitor Circuit based Physically Unclonable Function
(2020)
The Internet of Things (IoT) is expanding to a wide range of fields such as home automation, agriculture, environmental monitoring, industrial applications, and many more. Securing tens of billions of interconnected devices in the near future will be one of the biggest challenges. IoT devices are often constrained in terms of computational performance, area, and power, which demand lightweight security solutions. In this context, hardware-intrinsic security, particularly physically unclonable functions (PUFs), can provide lightweight identification and authentication for such devices. In this paper, random capacitor variations in a switched capacitor PUF circuit are used as a source of entropy to generate unique security keys. Furthermore, a mathematical model based on the ordinary least square method is developed to describe the relationship between random variations in capacitors and the resulting output voltages. The model is used to filter out systematic variations in circuit components to improve the quality of the extracted secrets.
Das Monitoring von Industrieanlagen stellt in der Wirtschaft sicher, dass hoch-automatisierte Prozesse reibungslos ablaufen können. Meistens steht hier das Monitoring der Anlagen selbst im Mittelpunkt, die Kommunikationsleitungen für den Datenaustausch auf Ethernet-Basis (z.B. Profinet) sind gegenwärtig noch nicht Teil einer kontinuierlichen Überwachung. Zwar werden auch hier die physischen Verbindungen überprüft, jedoch geschieht häufig dies nur zum Zeitpunkt der Inbetriebnahme, wenn die Anlage noch nicht in das Gesamtsystem integriert ist oder während eines Wartungszyklus, wenn die Maschine für die Dauer der Wartung aus dem Betriebsablauf genommen wird. Dies führt dazu, dass insbesondere heute, wo vor allem Ethernet zunehmend als Basis für die industrielle Kommunikation herangezogen wird, Maschinenausfälle aufgrund fehlender Kabelüberwachung immer wahrscheinlicher werden. Um dem entgegenwirken zu können, wurde im Projekt Ko2SiBus ein neues Messverfahren konzipiert, implementiert und validiert, das kostengünstig in neue oder bestehende Systeme integriert werden kann. Um die Tauglichkeit zu zeigen, wurden die Projektergebnisse in Prototypen und Demonstratoren implementiert, die sowohl als Stand-Alone aber auch als Integrationslösungen dienen können.
To demonstrate how deep learning can be applied to industrial applications with limited training data, deep learning methodologies are used in three different applications. In this paper, we perform unsupervised deep learning utilizing variational autoencoders and demonstrate that federated learning is a communication efficient concept for machine learning that protects data privacy. As an example, variational autoencoders are utilized to cluster and visualize data from a microelectromechanical systems foundry. Federated learning is used in a predictive maintenance scenario using the C-MAPSS dataset.
The number of use cases for autonomous vehicles is increasing day by day especially in commercial applications. One important application of autonomous vehicles can be found within the parcel delivery section. Here, autonomous cars can massively help to reduce delivery efforts and time by supporting the courier actively. One important component of course is the autonomous vehicle itself. Nevertheless, beside the autonomous vehicle, a flexible and secure communication architecture also is a crucial key component impacting the overall performance of such system since it is required to allow continuous interactions between the vehicle and the other components of the system. The communication system must provide a reliable and secure architecture that is still flexible enough to remain practical and to address several use cases. In this paper, a robust communication architecture for such autonomous fleet-based systems is proposed. The architecture provides a reliable communication between different system entities while keeping those communications secure. The architecture uses different technologies such as Bluetooth Low Energy (BLE), cellular networks and Low Power Wide Area Network (LPWAN) to achieve its goals.
Die industrielle Kommunikation war früher von relativ eingeschränkten, geschlossenen Feldbussystemen geprägt. Mit der zunehmenden Öffnung von Automatisierungsnetzen durch die horizontale und vertikale Integration in Produktionsanlagen entstehen gefährliche Angriffsflächen, die zum Diebstahl von Produktionsgeheimnissen, der Manipulation oder dem kompletten Lahmlegen der Produktionsprozesse führen können. Hieraus ergeben sich grundlegend neue Anforderung an die Datensicherheit, denen mit innovativen Lösungsansätzen begegnet werden muss.
Ziel des Forschungsvorhabens „SecureField“ war es, die Umsetzbarkeit und Anwendbarkeit des Ansatzes „(D)TLS-over-Anything“ zu untersuchen und nachzuweisen, sowie einen Werkzeugkasten zur Definition und Implementierung entsprechender Sicherheitslösungen vorzubereiten. Als langjährig etablierter Standard im IT-Umfeld stellte sich das (Datagram) Transport Layer Security ((D)TLS) Protokoll in Kombination mit einer industrie- bzw. automatisierungskompatiblen Public-Key-Infrastruktur (PKI) als äußerst vielversprechende Möglichkeit dar, Datensicherheit auch im OT-Umfeld zu erzielen. Hierbei sollten insbesondere KMU adressiert werden, für welche eigene Entwicklungsarbeiten in diesem Umfeld häufig zu aufwändig und technisch sowie wirtschaftlich zu riskant sind.
Mit „SecureField“ konnten Ergebnisse auf mehreren Ebenen erzielt werden. Zunächst konnte im Projektverlauf ein umfassendes und generisches Konzept zur Ende-zu-Ende-Absicherung von Kommunikationspfaden und -protokollen im industriellen Umfeld erarbeitet werden. Dieses Konzept besteht aus einem generischen Kommunikationsmodell sowie aus einem generischen Authentifikationsmodell.
IoT networks are increasingly used as entry points for cyberattacks, as often they offer low-security levels, as they may allow the control of physical systems and as they potentially also open the access to other IT networks and infrastructures. Existing intrusion detection systems (IDS) and intrusion prevention systems (IPS) mostly concentrate on legacy IT networks. Nowadays, they come with a high degree of complexity and adaptivity, including the use of artificial intelligence. It is only recently that these techniques are also applied to IoT networks. In this paper, we present a survey of machine learning and deep learning methods for intrusion detection, and we investigate how previous works used federated learning for IoT cybersecurity. For this, we present an overview of IoT protocols and potential security risks. We also report the techniques and the datasets used in the studied works, discuss the challenges of using ML, DL and FL for IoT cybersecurity and provide future insights.
Physically Unclonable Functions (PUFs) are hardware-based security primitives, which allow for inherent device fingerprinting. Therefore, intrinsic variation of imperfect manufactured systems is exploited to generate device-specific, unique identifiers. With printed electronics (PE) joining the internet of things (IoT), hardware-based security for novel PE-based systems is of increasing importance. Furthermore, PE offers the possibility for split-manufacturing, which mitigates the risk of PUF response readout by third parties, before commissioning. In this paper, we investigate a printed PUF core as intrinsic variation source for the generation of unique identifiers from a crossbar architecture. The printed crossbar PUF is verified by simulation of a 8×8-cells crossbar, which can be utilized to generate 32-bit wide identifiers. Further focus is on limiting factors regarding printed devices, such as increased parasitics, due to novel materials and required control logic specifications. The simulation results highlight, that the printed crossbar PUF is capable to generate close-to-ideal unique identifiers at the investigated feature size. As proof of concept a 2×2-cells printed crossbar PUF core is fabricated and electrically characterized.
Die Erfindung betrifft ein Verfahren zur Synchronisation eines Netzwerkgeräts für die drahtlose Kommunikation, insbesondere eines Netzwerk-Endgeräts, in einem Drahtlosnetzwerk, wobei das Netzwerkgerät einen integrierten Schaltkreis für die drahtlose Kommunikation (IWC), eine Synchronisationsevent-Detektoreinrichtung (SED) für das Detektieren von Synchronisationsevents, einen steuerbaren Clock-Generator (CCG) für das Erzeugen eines synchronisierten Zeitsignals TCCGund eine Synchronisationssteuereinrichtung (SCD) zur Steuerung des Synchronisationsvorgangs des Netzwerkgeräts umfasst. In dem Netzwerkgerät werden während einer Synchronisationsphase folgende Verfahrensschritte durchgeführt: Zunächst wird ein Synchronisations-Frame empfangen und ein Synchronisations-Timestamp TAPdetektiert. Anschließend wird ein Timestamp TBmittels einer im IWC enthaltenen IWC-Clock erzeugt, der die Empfangszeit des Synchronisations-Frames definiert. In einem weiteren Schritt wird an einem Port des IWC ein Potenzialwechsel erzeugt, der einen Synchronisationsevent darstellt. Weiterhin wird ein Timestamp TSEmittels der IWC-Clock erzeugt, der den Zeitpunkt des Synchronisationsevents definiert. Die SED detektiert den Synchronisationsevent durch Auswerten der zeitlichen Länge des Potenzialwechsels des Ports des IWC und erzeugt einen Timestamp TSunter Verwendung des synchronisierten Zeitsignals TCCG, wobei der Timestamp TSdenselben Zeitpunkt des Synchronisationsevents definiert wie der Timestamp TSE. Die Timestamps TAP, TB, TSEund TS, die mittels Verarbeitung von ein oder mehreren Synchronisationsevent-Frames gemäß den Schritten (a) bis (d) ermittelt wurden, werden dann zur Synchronisierung des vom CCG erzeugten synchronisierten Zeitsignals TCCGauf das Master-Zeitsignal verwendet.
Digital transformation strengthens the interconnection of companies in order to develop optimized and better customized, cross-company business models. These models require secure, reliable, and traceable evidence and monitoring of contractually agreed information to gain trust between stakeholders. Blockchain technology using smart contracts allows the industry to establish trust and automate cross-company business processes without the risk of losing data control. A typical cross-company industry use case is equipment maintenance. Machine manufacturers and service providers offer maintenance for their machines and tools in order to achieve high availability at low costs. The aim of this chapter is to demonstrate how maintenance use cases are attempted by utilizing hyperledger fabric for building a chain of trust by hardened evidence logging of the maintenance process to achieve legal certainty. Contracts are digitized into smart contracts automating business that increase the security and mitigate the error-proneness of the business processes.
For the past few years Low Power Wide Area Networks (LPWAN) have emerged as key technologies for the connectivity of many applications in the Internet of Things (IoT) combining low-data rates with strict cost and energy restrictions. Especially LoRa/LoRaWAN enjoys a high visibility on today’s markets, because of its good performance and its open community. Originally LoRa was designed for operation within the Sub-GHz ISM bands for Industrial, Scientific and Medical applications. However, at the end of 2018, a LoRa-based solution in the 2.4GHz ISM-band was presented promising higher bandwidths and higher data rates. Furthermore, it overcomes the limited duty-cycle prescribed by the regulations in the ISM-bands and therefore also opens doors to many novel application fields. Also, due to higher bandwidths and shorter transmission times, the use of alternative MAC layer protocols becomes very interesting, i.e. for TDMA based-approaches. Within this paper, we propose a system architecture with 2.4GHz LoRa components combining two aspects. On the one hand, we present a design and an implementation of a 2.4GHz based LoRaWAN solution that can be seamlessly integrated into existing LoRaWAN back-hauls. On the other hand, we describe deterministic setup using a Time Slotted Channel Hopping (TSCH) approach as defined in the IEEE802.15.4-2015 standard for industrial applications. Finally, measurements show the performance of the system.
It seems to be a widespread impression that the use of strong cryptography inevitably imposes a prohibitive burden on industrial communication systems, at least inasmuch as real-time requirements in cyclic fieldbus communications are concerned. AES-GCM is a leading cryptographic algorithm for authenticated encryption, which protects data against disclosure and manipulations. We study the use of both hardware and software-based implementations of AES-GCM. By simulations as well as measurements on an FPGA-based prototype setup we gain and substantiate an important insight: for devices with a 100 Mbps full-duplex link, a single low-footprint AES-GCM hardware engine can deterministically cope with the worst-case computational load, i.e., even if the device maintains a maximum number of cyclic communication relations with individual cryptographic keys. Our results show that hardware support for AES-GCM in industrial fieldbus components may actually be very lightweight.
In the last decade, deep learning models for condition monitoring of mechanical systems increasingly gained importance. Most of the previous works use data of the same domain (e.g., bearing type) or of a large amount of (labeled) samples. This approach is not valid for many real-world scenarios from industrial use-cases where only a small amount of data, often unlabeled, is available.
In this paper, we propose, evaluate, and compare a novel technique based on an intermediate domain, which creates a new representation of the features in the data and abstracts the defects of rotating elements such as bearings. The results based on an intermediate domain related to characteristic frequencies show an improved accuracy of up to 32 % on small labeled datasets compared to the current state-of-the-art in the time-frequency domain.
Furthermore, a Convolutional Neural Network (CNN) architecture is proposed for transfer learning. We also propose and evaluate a new approach for transfer learning, which we call Layered Maximum Mean Discrepancy (LMMD). This approach is based on the Maximum Mean Discrepancy (MMD) but extends it by considering the special characteristics of the proposed intermediate domain. The presented approach outperforms the traditional combination of Hilbert–Huang Transform (HHT) and S-Transform with MMD on all datasets for unsupervised as well as for semi-supervised learning. In most of our test cases, it also outperforms other state-of-the-art techniques.
This approach is capable of using different types of bearings in the source and target domain under a wide variation of the rotation speed.
Cryptographic protection of messages requires frequent updates of the symmetric cipher key used for encryption and decryption, respectively. Protocols of legacy IT security, like TLS, SSH, or MACsec implement rekeying under the assumption that, first, application data exchange is allowed to stall occasionally and, second, dedicated control messages to orchestrate the process can be exchanged. In real-time automation applications, the first is generally prohibitive, while the second may induce problematic traffic patterns on the network. We present a novel seamless rekeying approach, which can be embedded into cyclic application data exchanges. Although, being agnostic to the underlying real-time communication system, we developed a demonstrator emulating the widespread industrial Ethernet system PROFINET IO and successfully use this rekeying mechanism.
It is important to minimize the unscheduled downtime of machines caused by outages of machine components in highly automated production lines. Considering machine tools such as, grinding machines, the bearing inside of spindles is one of the most critical components. In the last decade, research has increasingly focused on fault detection of bearings. In addition, the rise of machine learning concepts has also intensified interest in this area. However, up to date, there is no single one-fits-all solution for predictive maintenance of bearings. Most research so far has only looked at individual bearing types at a time.
This paper gives an overview of the most important approaches for bearing-fault analysis in grinding machines. There are two main parts of the analysis presented in this paper. The first part presents the classification of bearing faults, which includes the detection of unhealthy conditions, the position of the error (e.g. at the inner or at the outer ring of the bearing) and the severity, which detects the size of the fault. The second part presents the prediction of remaining useful life, which is important for estimating the productive use of a component before a potential failure, optimizing the replacement costs and minimizing downtime.
The EREMI project is a 2-year project funded under the ERASMUS+ framework programme and its team has developed and will validate an advanced higher education program, including life-long learning, on the interdisciplinary topic of resource efficiency in manufacturing industries and the overall system optimization of low or not digitized physical infrastructure. All of these will be achieved by applying IoT technologies towards efficient industrial systems, and by utilizing a high-level educated human capital on these economically, politically, and technically crucial and highly relevant topics for the rapidly developing industries and economies of intensively economically and industrially transforming countries - Bulgaria, North Macedonia, and Romania. Efficiency will be attained by utilizing the experience and expertise of the involved German partner organisation.
Sequenzielle Schaltungen
(2022)
Spatially Distributed Wireless Networks (SDWN) are one of the basic technologies for the Internet of Things (IoT) and (Industrial) Internet of Things (IIoT) applications. These SDWN for many of these applications has strict requirements such as low cost, simple installation and operations, and high potential flexibility and mobility. Among the different Narrowband Wireless Wide Area Networking (NBWWAN) technologies, which are introduced to address these categories of wireless networking requirements, Narrowband Internet of Things (NB-IoT) is getting more traction due to attractive system parameters, energy-saving mode of operation with low data rates and bandwidth, and its applicability in 5G use cases. Since several technologies are available and because the underlying use cases come with various requirements, it is essential to perform a systematic comparative analysis of competing technologies to choose the right technology. It is also important to perform testing during different phases of the system development life cycle. This paper describes the systematic test environment for automated testing of radio communication and systematic measurements of the performance of NB-IoT.
Towards a Formal Verification of Seamless Cryptographic Rekeying in Real-Time Communication Systems
(2022)
This paper makes two contributions to the verification of communication protocols by transition systems. Firstly, the paper presents a modeling of a cyclic communication protocol using a synchronized network of transition systems. This protocol enables seamless cryptographic rekeying embedded into cyclic messages. Secondly, we test the protocol using the model checking verification technique.
This paper presents an extended version of a previously published Bayesian algorithm for the automatic correction of the positions of the equipment on the map with simultaneous mobile object trajectory localization (SLAM) in underground mine environment represented by undirected graph. The proposed extended SLAM algorithm requires much less preliminary data on possible equipment positions and uses an additional resample move algorithm to significantly improve the overall performance.
Due to its potential in improving the efficiency of energy supply, smart energy metering (SEM) has become an area of interest with the surge in Internet of Things (IoT). SEM entails remote monitoring and control of the sensors and actuators associated with the energy supply system. This provides a flexible platform to conceive and implement new data driven Demand Side Management (DSM) mechanisms. The IoT enablement allows the data to be gathered and analyzed at requisite granularity. In addition to efficient use of energy resources and provisioning of power, developing countries face an additional challenge of temporal mismatch in generation capacity and load factors. This leads to widespread deployment of inefficient and expensive Uninterruptible Power Supply (UPS) solutions for limited power provisioning during resulting blackouts. Our proposed “Soft-UPS” allows dynamic matching of load and generation through a combination of managed curtailment. This eliminates inefficiencies in the energy and power value chain and allows a data-driven approach to solving a widespread problem in developing countries, simultaneously reducing both upfront and running costs of conventional UPS and storage. A scalable and modular platform is proposed and implemented in this paper. The architecture employs “WiMODino” using LoRaWAN with a “Lite Gateway” and SQLite repository for data storage. Role based access to the system through an android application has also been demonstrated for monitoring and control.
To deal with frequent power outages in developing countries, people turn to solutions like uninterruptible power supply (UPS), which stores electric energy during normal operating hours and use it to meet energy needs during rolling blackout intervals. Locally produced UPSs of poorer power quality are widely accessible in the marketplaces, and they have a negative impact on power quality. The charging and discharging of the batteries in these UPSs generate significant amount of power losses in weak grid environments. The Smart-UPS is our proposed smart energy metering (SEM) solution for low voltage consumers that is provided by the distribution company. It does not require batteries, therefore there is no power loss or harmonic distortion due to corresponding charging and discharging. Through load flow and harmonic analysis of both traditional UPS and Smart-UPS systems on ETAP, this paper examines their impact on the harmonics and stability of the distribution grid. The simulation results demonstrate that Smart-UPS can assist fixing power quality issues in a developing country like Pakistan by providing cleaner energy than the battery-operated traditional UPSs.
Narrowband Internet-of-Things (NB-IoT) is a 3rd generation partnership project (3GPP) standardized cellular technology, adopted for 5G and optimized for massive Machine Type Communication (mMTC). Applications are anticipated around infrastructure monitoring, asset management, smart city and smart energy applications. In this paper, we evaluate the suitability of NB-IoT for private (campus) networks in industrial environments, including complex cloud-based applications around process automation. An end-to-end system has been developed, comprising of a sensor unit connected to a NB-IoT modem, a base station (gNodeB) equipped with a beamforming array and a local (private) network architecture comprising a sensor management system in the edge cloud. The experimental study includes field tests in realistic industrial environments with latency, reliability and coverage measurements. The results show a good suitability of NB-IoT for process automation with high scalability, low-power requirements and moderate latency requirements.