Refine
Document Type
- Conference Proceeding (9) (remove)
Conference Type
- Konferenzartikel (9)
Language
- English (9)
Has Fulltext
- no (9)
Is part of the Bibliography
- yes (9)
Keywords
- Radar (3)
- Optik (2)
- UWB radars (2)
- catheter ablation (2)
- imaging algorithms (2)
- medical imaging (2)
- microwave (2)
- scattering measurements (2)
- Angle of Arrival (1)
- Automotive Radar (1)
Institute
- IUAS - Institute for Unmanned Aerial Systems (9) (remove)
Open Access
- Closed (5)
- Closed Access (3)
- Open Access (1)
In this study, various imaging algorithms for the localization of objects have been investigated. Therefore, an Ultra-Wideband (UWB) radar based experimental setup with a circular antenna array is designed as part of this work. This concept could be particularly useful in microwave medical imaging applications. In order to validate its applicability in microwave imaging, different imaging algorithms have been evaluated and compared by means of our experimental setup. Accurate imaging results have been achieved with our system under multiple test-scenarios.
In automotive parking scenario, where the curb shall be detected and classified to be traversable or not, radars play an important role. There are different approaches already proposed in other works to estimate the target height. This paper assesses and compares two methods. The first is based on Angle of Arrival (AoA) estimation of input signals of multiple antennas using the Multiple-Input-Multiple-Output (MIMO) principle. The second method uses the geometry in multipath propagation of the radar echo signal for one antenna input. In this work a modified method of calculation of the curb height based on the second method is proposed. The theory of approach is mathematically proved and effectiveness is demonstrated by evaluation of measurements with a 77 GHz Frequency Modulated Continuous Wave (FMCW) radar. In order to evaluate the performance of the introduced method the mean square error (MSE) is used in the proposed scenario. This method, using only one antenna input, produced up to 3.4 times better results for curb height detection in comparison with former methods.
Not only is the number of new devices constantly increasing, but so is their application complexity and power. Most of their applications are in optics, photonics, acoustic and mobile devices. Working speed and functionality is achieved in most of media devices by strategic use of digital signal processors and microcontrollers of the new generation. Considering all these premises of media development dynamics, the authors present how to integrate microcontrollers and digital signal processors in the curricula of media technology lectures by using adequate content. This also includes interdisciplinary content that consists of using the acquired knowledge in media software. These entries offer a deeper understanding of photonics, acoustics and media engineering.
Skin cancer detection proves to be complicated and highly dependent on the examiner’s skills. Millimeter-wave technologies seem to be a promising aid for the detection of skin cancer. The different water content of the skin area affected by cancer compared to healthy skin changes its reflective property. Due to limited available resources on the dielectric properties of skin cancer, especially in comparison to surrounding healthy skin, accurate simulations and evaluations are quite challenging. Therefore, comparing different results for different approaches and starting points can be difficult. In this paper, the Effective Medium Theory is applied to model skin cancer, which provides permittivity values dependent on the water content.
Investigation on Bowtie Antennas Operating at Very Low Frequencies for Ground Penetrating Radar
(2023)
The efficiency of Ground Penetrating Radar (GPR) systems significantly depends on the antenna performance as the signal has to propagate through lossy and inhomogeneous media. GPR antennas should have a low operating frequency for greater penetration depth, high gain and efficiency to increase the receiving power and should be compact and lightweight for ease of GPR surveying. In this paper, two different designs of Bowtie antennas operating at very low frequencies are proposed and analyzed.
In the brain-cell microenvironment, diffusion plays an important role: apart from delivering glucose and oxygen from the vascular system to brain cells, it also moves informational substances between cells. The brain is an extremely complex structure of interwoven, intercommunicating cells, but recent theoretical and experimental works showed that the classical laws of diffusion, cast in the framework of porous media theory, can deliver an accurate quantitative description of the way molecules are transported through this tissue. The mathematical modeling and the numerical simulations are successfully applied in the investigation of diffusion processes in tissues, replacing the costly laboratory investigations. Nevertheless, modeling must rely on highly accurate information regarding the main parameters (tortuosity, volume fraction) which characterize the tissue, obtained by structural and functional imaging. The usual techniques to measure the diffusion mechanism in brain tissue are the radiotracer method, the real time iontophoretic method and integrative optical imaging using fluorescence microscopy. A promising technique for obtaining the values for characteristic parameters of the transport equation is the direct optical investigation using optical fibers. The analysis of these parameters also reveals how the local geometry of the brain changes with time or under pathological conditions. This paper presents a set of computations concerning the mass transport inside the brain tissue, for different types of cells. By measuring the time evolution of the concentration profile of an injected substance and using suitable fitting procedures, the main parameters characterizing the tissue can be determined. This type of analysis could be an important tool in understanding the functional mechanisms of effective drug delivery in complex structures such as the brain tissue. It also offers possibilities to realize optical imaging methods for in vitro and in vivo measurements using optical fibers. The model also may help in radiotracer biomarker models for the understanding of the mechanism of action of new chemical entities.
We report the use of the Raman spectral information of the chemical compound toluene C7H8 as a reference on the analysis of laboratory-prepared and commercially acquired gasoline-ethanol blends. The rate behavior of the characteristic Raman lines of toluene and gasoline has enabled the approximated quantification of this additive in commercial gasoline-ethanol mixtures. This rate behavior has been obtained from the Raman spectra of gasoline-ethanol blends with different proportions of toluene.
All these Raman spectra have been collected by using a self-designed, frequency precise and low-cost Fourier-transform Raman spectrometer (FT-Raman spectrometer) prototype. This FT-Raman prototype has helped to accurately confirm the frequency position of the main characteristic Raman lines of toluene present on the different gasoline-ethanol samples analyzed at smaller proportions than those commonly found in commercial gasoline-ethanol blends. The frequency accuracy validation has been performed by analyzing the same set of toluene samples with two additional state-of-the-art commercial FT-Raman devices. Additionally, the spectral information has been contrasted, with highly-correlated coefficients as a result, with the values of the standard Raman spectrum of toluene.
In this study, an approach to a microwave-based radar system for the localization of objects has been proposed. This could be particularly useful in microwave imaging applications such as cardiac catheter detection. An experimental system is defined and realized with the selection of an appropriate antenna design. Hardware control functions and different imaging algorithms are implemented as well. The functionality of this measurement setup has been analyzed considering multiple testscenarios and it is proved to be capable of locating multiple objects as well as expanded objects.
A method for evaluating skin cancer detection based on millimeter-wave technologies is presented. For this purpose, the relative permittivities are calculated using the effective medium theory for the benign and cancerous lesion, considering the change in water content between them. These calculated relative permittivities are further used for the simulation and evaluation of skin cancer detection using a substrate-integrated waveguide probe. A difference in the simulated scattering parameters S 11 of up to 13dB between healthy and cancerous skin can be determined in the best-case.