Refine
Year of publication
Document Type
- Conference Proceeding (286) (remove)
Conference Type
- Konferenzartikel (205)
- Konferenz-Abstract (47)
- Konferenz-Poster (16)
- Sonstiges (14)
- Konferenzband (7)
Is part of the Bibliography
- yes (286)
Keywords
- injury (10)
- RoboCup (8)
- TRIZ (7)
- Biomechanik (6)
- running (6)
- Finite-Elemente-Methode (5)
- Konstruktion (5)
- Produktentwicklung (5)
- biomechanics (5)
- ACL (4)
Institute
- Fakultät Maschinenbau und Verfahrenstechnik (M+V) (286) (remove)
Open Access
- Open Access (139)
- Closed Access (93)
- Closed (52)
- Bronze (42)
- Diamond (10)
- Grün (5)
- Gold (3)
To achieve Germany's climate targets, the industrial sector, among others, must be transformed. The decarbonization of industry through the electrification of heating processes is a promising option. In order to investigate this transformation in energy system models, high-resolution temporal demand profiles of the heat and electricity applications for different industries are required. This paper presents a method for generating synthetic electricity and heat load profiles for 14 industry types. Using this methodology, annual profiles with a 15-minute resolution can be generated for both energy demands. First, daily profiles for the electricity demand were generated for 4 different production days. These daily profiles are additionally subdivided into eight end-use application categories. Finally, white noise is applied to the profile of the mechanical drives. The heat profile is similar to the electrical but is subdivided into four temperature ranges and the two applications hot water and space heating. The space heating application is additionally adjusted to the average monthly outdoor temperature. Both time series were generated for the analysis of an electrification of industrial heat application in energy system modelling.
The contribution of the RoofKIT student team to the SDE 21/22 competition is the extension of an existing café in Wuppertal, Germany, to create new functions and living space for the building with simultaneous energetic upgrading. A demonstration unit is built representing a small cut-out of this extension. The developed energy concept was thoroughly simulated by the student team in seminars using Modelica. The system uses mainly solar energy via PVT collectors as the heat source for a brine-water heat pump (space heating and hot water). Energy storage (thermal and electrical) is installed to decouple generation and consumption. Simulation results confirm that carbon neutrality is achieved for the building operation, consuming and generating around 60 kWh/m2a.
Peer-to-peer energy trading and local electricity markets have been widely discussed as new options for the transformation of the energy system from the traditional centralized scheme to the novel decentralized one. Moreover, it has also been proposed as a more favourable alternative for already expiring feed in tariff policies that promote investment in renewable energy sources. Peer-to-peer energy trading is usually defined as the integration of several innovative technologies, that enable both prosumers and consumers to trade electricity, without intermediaries, at a consented price. Furthermore, the techno-economic aspects go hand in hand with the socio-economic aspects, which represent at the end significant barriers that need to be tackled to reach a higher impact on current power systems. Applying a qualitative analysis, two scalable peer-to-peer concepts are presented in this study and the possible participant´s entry probability into such concepts. Results show that consumers with a preference for environmental aspects have in general a higher willingness to participate in peer-to-peer energy trading. Moreover, battery storage systems are a key technology that could elevate the entry probability of prosumers into a peer-to-peer market.
Most recently, the federal government in Germany published new climate goals in order reach climate neutrality by 2045. This paper demonstrates a path to a cost optimal energy supply system for the German power grid until the year 2050. With special regard to regionality, the system is based on yearly myopic optimization with the required energy system transformation measures and the associated system costs. The results point out, that energy storage systems (ESS) are fundamental for renewables integration in order to have a feasible energy transition. Moreover, the investment in storage technologies increased the usage of the solar and wind technologies. Solar energy investments were highly accompanied with the installation of short-term battery storage. Longer-term storage technologies, such as H2, were accompanied with high installations of wind technologies. The results pointed out that hydrogen investments are expected to overrule short-term batteries if their cost continues to decrease sharply. Moreover, with a strong presence of ESS in the energy system, biomass energy is expected to be completely ruled out from the energy mix. With the current emission reduction strategy and without a strong presence of large scale ESS into the system, it is unlikely that the Paris agreement 2° C target by 2050 will be achieved, let alone the 1.5° C.
Lithium-ion batteries show strongly nonlinear behaviour regarding the battery current and state of charge. Therefore, the modelling of lithium-ion batteries is complex. Combining physical and data-driven models in a grey-box model can simplify the modelling. Our focus is on using neural networks, especially neural ordinary differential equations, for grey-box modelling of lithium-ion batteries. A simple equivalent circuit model serves as a basis for the grey-box model. Unknown parameters and dependencies are then replaced by learnable parameters and neural networks. We use experimental full-cycle data and data from pulse tests of a lithium iron phosphate cell to train the model. Finally, we test the model against two dynamic load profiles: one consisting of half cycles and one dynamic load profile representing a home-storage system. The dynamic response of the battery is well captured by the model.
Physik durch Informatik
(2022)
Selbsttests in Lernmanagementsystemen (LMS) ermöglichen es Studierenden, den eigenen Lernfortschritt einzuschätzen. Das didaktische Konzept Physik durch Informatik (PDI) ist charakterisiert durch die Nutzung einer Programmiersprache zur Lösungseingabe bei Mathematik und Physik-Aufgaben. Im Gegensatz zur Lösungseingabe durch Zahlenwerte oder im Antwort-Auswahl-Verfahren erfordert die Implementierung einer Lösung in einer Programmiersprache eine höhere Kompetenzstufe.
We describe a prototype for power line communi- cation for grid monitoring. The PLC receiver is used to gain information about the PLC channel and the current state of the power grid. The PLC receiver uses the communication signal to obtain an accurate estimate of the current channel and provides information which can be used as a basis for further processing with the aim to detect partial discharges and other anomalies in the grid. This monitoring of the power grid takes advantage of existing PLC infrastructure and uses the data signals, which are transmitted anyway to obtain a real-time measurement of the channel transfer function and the received noise signal. Since this signal is sampled at a high sampling rate compared to simpler measurement sensors, it contains valuable information about possible degradations in the grid which need to be addressed. While channel measurements are based on a received PLC signal, information about partial discharges or other sources of interference can be gathered by a PLC receiver in the absence of a transmit signal. A prototype based on Software Defined Radio has been developed, which implements the simultaneous communication and sensing for a power grid.
This study aims to investigate the individual response concerning BRFs for AT when the mid-sole hardness underneath the rearfoot was systematically altered. We first identified FGs based on the footwear condition that minimised the risk for AT across BRFs. We then tested the FGs for differences in anthropometrics, footwear comfort, and running characteristics.
For some years now, additive manufacturing (AM) has offered an alternative to conventional manufacturing processes. The strengths of AM are primarily the rapid implementation of ideas into a usable product and the ability to produce geometrically complex shapes. It has also significantly advanced the lightweight design of products made of plastic. So far, the strength of printed components made of polymers is previously very limited.
Recently, new AM processes have become available that allow the embedding of short and also long fibers in polymer matrix. Thus, the manufacturing of components that provide a significant increase in strength becomes possible. In this way, both complex geometries and sophisticated applications can be implemented. This paper therefore investigates how this new technology can be implemented in product development, focusing on sports equipment. An extensive literature research shows that lightweight design plays a decisive role in sports equipment. In addition, the advantages of AM in terms of individualized products and low quantities can be fully exploited.
An example of this approach is the steering system for a seat sled used by paraplegic athletes in the Olympic discipline of Nordic paraskiing. A particular challenge here is the placement and alignment of the long carbon fibers within the polymer matrix and the verification of the strength by means of Finite-Element-Analysis (FEA). In addition, findings from bionics are used to optimize the lightweight design of the steering system. Using this example, it can be shown that the weight of the steering system can be drastically reduced compared to conventional manufacturing. At the same time, a number of parts can be saved through function integration and thus the manufacturing and assembly effort can be reduced significantly.
The internal crowdsourcing-based ideation within a company can be defined as an involvement of its staff, specialists, managers, and other employees, to propose solution ideas for a pre-defined problem. This paper addresses a question, how many participants of the company-internal ideation process are required to nearly reach the ideation limit for the problems with a finite number of workable solutions. To answer the research question, the author proposes a set of metrics and a non-linear ideation performance function with a positive decreasing slope and ideation limit for the closed-ended problems. Three series of experiments helped to explore relationships between the metric attributes and resulted in a mathematical model which allows companies to predict the productivity metrics of their crowdsourcing ideation activities such as quantity of different ideas and ideation limit as a function of the number of contributors, their average personal creativity and ideation efficiency of a contributors’ group.
Offenburg university of Applied Sciences offers pre-study extracurricular preparatory courses for future engineering students in mathematics and physics. Due to pandemic restrictions, the two-week preparatory physics course preceeding winter term 2020/21 was presented as an online -only course.
Students enrolled to the course attended eight online lect ures of approximately 90 minutes duration followed by a group assignment. Both lectures and tutoring to the group assignment used a videoconference system with group sizes of 120 (lecture) and 6 (peer instruction and group assignments). The eight lectures focused on the high school physics curriculum of mechanics, electricity, thermodynamics and optics. Each lecture included four “peer instruction” questions to improve student activation. Student responses were collected using an audience response online tool.
The “peer instruction” questions were discussed by the students in online groups of six students. These groups also received written group assignments consisting of common textbook exercises and additional problems with incomplete information. To solve these problems, groups were encouraged to discuss possible solutions. The on-line course attendance was monitored and showed a characteristic exponential “decay” curve with a half-life of approximately 18 lectures which is comparable to conventional courses: Around 73% of the students enrolled in the preparatory course attended all eight lectures. In addition to the attendance, the progress of the participants was monitored by two online tests: A pre-course online test the first course day and a post -course online test on the last day.
The completion of both tests was highly recommended, but not a formal requirement for the students. The fraction of students completing the pre-course, but not the post-course test was used as an estimate for the drop-out rate of (34±3)%.
The twin concept is increasingly used for optimization tasks in the context of Industry 4.0 and digitization. The twin concept can also help small and medium-sized enterprises (SME) to exploit their energy flexibility potential and to achieve added value by appropriate energy marketing. At the same time, this use of flexibility helps to realize a climate-neutral energy supply with high shares of renewable energies. The digital twin reflects real production, power flows and market influences as a computer model, which makes it possible to simulate and optimize on-site interventions and interactions with the energy market without disturbing the real production processes. This paper describes the development of a generic model library that maps flexibility-relevant components and processes of SME, thus simplifying the creation of a digital twin. The paper also includes the development of an experimental twin consisting of SME hardware components and a PLC-based SCADA system. The experimental twin provides a laboratory environment in which the digital twin can be tested, further developed and demonstrated on a laboratory scale. Concrete implementations of such a digital twin and experimental twin are described as examples.
Grey-box modelling combines physical and data-driven models to benefit from their respective advantages. Neural ordinary differential equations (NODEs) offer new possibilities for grey-box modelling, as differential equations given by physical laws and neural networks can be combined in a single modelling framework. This simplifies the simulation and optimization and allows to consider irregularly-sampled data during training and evaluation of the model. We demonstrate this approach using two levels of model complexity; first, a simple parallel resistor-capacitor circuit; and second, an equivalent circuit model of a lithium-ion battery cell, where the change of the voltage drop over the resistor-capacitor circuit including its dependence on current and State-of-Charge is implemented as NODE. After training, both models show good agreement with analytical solutions respectively with experimental data.
Ein tiefgreifendes Verständnis des zyklischen Plastizitätsverhaltens metallischer Werkstoffe ist sowohl für die Optimierung der Materialeigenschaften als auch für die industrielle Auslegung und Fertigung von Bauteilen von hoher Relevanz. Insbesondere moderne Legierungen wie Duplex-Stähle zeigen unter Lastumkehr aufgrund des komplexen mehrphasigen Gefüges sowie der Neigung zu verschiedenen Ausscheidungsreaktionen einen ausgeprägten Bauschinger-Effekt, welcher bei technischen Umformvorgängen berücksichtigt werden muss. Der Bauschinger-Effekt begründet sich maßgeblich in der Entstehung von Rückspannungen, welche aus dem unterschiedlichen Plastizitätsverhalten der austenitischen und ferritischen Phase resultieren. Instrumentierte Mikroindenter-Versuche in ausgewählten Ferrit- und Austenitkörnern haben gezeigt, dass austenitische Gefügebestandteile durch einen deutlich früheren Fließbeginn sowie eine stärkere Rückplastifizierung während der Entlastung charakterisiert sind. Zudem wurde nachgewiesen, dass Ausscheidungen im Rahmen einer 475°C-Versprödung diesen Phasenunterschied verstärken und somit in einem höheren Bauschinger-Effekt resultieren.
Die angestrebten Klimaschutzziele erfordern, dass Erneuerbare Energien längerfristig zur Hauptenergiequelle der Energieversorgung werden. Um dieses ehrgeizige Ziel zu erreichen, ist es angebracht konventionelle und erneuerbare Energie oder noch besser nachhaltige Einzelprozesse intelligent miteinander zu verknüpfen.
Das Projekt EBIPREP wird von einer interdisziplinären Forschergruppe bestehend aus Chemikern, Prozessingenieuren und Bioprozessingenieuren sowie Physikern, die auf Sensoren und Prozesssteuerung spezialisiert sind durchgeführt. Das Ziel ist es, neue Lösungen für die Nutzungswege von Holzhackschnitzeln und den bei der mechanischen Trocknung anfallenden Holzpresssaft zu entwickeln. Neben der Hackschnitzelvergasung und der katalytischen Reinigung des Holzgases steht die Nutzung des Holzpresssafts in Biogasanlagen und bei der biotechnologischen Wertstofferzeugung, z.B. bei der Enzymherstellung, im Vordergrund.
Was wir tun?
Das EBIPREP-Projekt wird von einer interdisziplinären Forschungsgruppe durchgeführt, die sich aus Chemikern, Prozessingenieuren, Bioprozessingenieuren und Physikern zusammensetzt. Ziel ist es, neue Lösungen für den Einsatz von Hackschnitzeln und Holzpresssaft zu entwickeln, die durch ein innovatives mechanisches Trocknungsverfahren gewonnen werden. Neben der Holzvergasung und katalytischen Reinigung des Holzgases ist der Einsatz von Holzpresssaft in Biogasanlagen und in biotechnologischen Produktionsprozessen von Wertstoffen vorgesehen. Holzhackschnitzel werden thermisch vergast. Es werden Online-Sensoren entwickelt, um die relevanten Parameter der stabilisierten und optimierten Einzelprozesse auszuwerten. Die Verknüpfung von thermischen und biotechnologischer Konversionsprozessen könnte dazu beitragen, die Dimension von Biogasreaktoren erheblich zu reduzieren. Diese Tatsache wird folglich zu einer spürbaren Kostensenkung führen.
Ziele des EBIPREP-Projekts
• die Vorteile der thermischen und biologischen Umwandlung von Biomasse zu kombinieren;
• Entwicklung eines Verfahrens zur Reduzierung von Schadstoffemissionen mit innovativen Sensoren und katalytische Behandlung von Synthesegasen;
• nachhaltige Produktion biotechnologischer wertvoller Produkte
• wirtschaftliche und ökologische Analyse des Gesamtprozesses im Vergleich zu den Einzelprozessen
• Einsatz von Prozessabwässern zur Erzeugung regenerativer Energie oder biotechnologischer Wertstoffe
• Erwerb neuer Kenntnisse auf dem Gebiet der Rückgewinnungstechnik von Rückständen
• und Energieerzeugung;
• Erweiterung neuer Anwendungsfelder für innovative Sensoren und Keramik
• Schäume für Katalysatoren;
• Senkung der Kosten für die Biogasproduktion
Im geplanten Übersichtsvortrag werden die vernetzten Strukturen des Projekts EBIPREP und deren zentralen Ergebnisse vorgestellt.
Do you know that for each banana bunch the complete plant must be cut as well? Only in Brazil 440 million trees are planted annually. With an average weight of 30 kg per banana plant you can estimate about 13,5 million tons of banana residues per year. Although there exist some projects to use these residues for the production of valuable products (e.g fibers for textile and paper production) most of this organic waste material is unused and left for composting on the farmland.
The basic idea of this project is to evaluate this organic waste material for converting it to a renewable and CO2 neutral fuel. Therefore, the different parts of the banana plant (heart, leaves and pseudo stem) were analyzed regarding their biogas potential (specific biogas yield and biogas production kinetics). In further studies the effect of mechanical and enzymatic pretreatments of the different parts of the plants was investigated. This examination could then be the basis for an energetic usage of this organic residue.
The biogas batch experiments were performed according to the german guideline VDI 4630 in 2-L-Batch reactors at 37°C. As biogas substrates, the heart, the leaves and the pseudo stem of the banana plant residue with and without enzymatic/mechanical pretreatment were used.
The different parts of the banana plants result in a specific biogas production yield in the range of 260-470 norm liters per kg organic dry mass.
To determine the influence of the mechanical pretreatment (particle size 1-15 mm) on the biogas production kinetics, the kinetic constants were defined and calculated. The reduction of the particle size leads to an improved biogas production kinetics. Therefore experiments will demonstrate, if the results from the batch experiments can be converted in the continuous fed biogas reactor. The experiments of the enzymatic pretreatment are still under investigation.
Environmentally-friendly implementation of new technologies and eco-innovative solutions often faces additional secondary ecological problems. On the other hand, existing biological systems show a lesser environmental impact as compared to the human-made products or technologies. The paper defines a research agenda for identification of underlying eco-inventive principles used in the natural systems created through evolution. Finally, the paper proposes a comprehensive method for capturing eco-innovation principles in biological systems in addition and complementary to the existing biomimetic methods and TRIZ methodology and illustrates it with an example.
Cross-industry innovation is commonly understood as identification of analogies and interdisciplinary transfer or copying of technologies, processes, technical solutions, working principles or models between industrial sectors. In general, creative thinking in analogies belongs to the efficient ideation techniques. However, engineering graduates and specialists frequently lack the skills to think across the industry boundaries systematically. To overcome this drawback an easy-to-use method based on five analogies has been evaluated through its applications by students and engineers in numerous experiments and industrial case studies. The proposed analogies help to identify and resolve engineering contradictions and apply approaches of the Theory of Inventive Problem Solving TRIZ and biomimetics. The paper analyses the outcomes of the systematized analogies-based ideation and outlines that its performance continuously grows with the engineering experience. It defines metrics for ideation efficiency and ideation performance function.
This book constitutes the refereed proceedings of the 20th International TRIZ Future Conference, TFC 2020, held online at the University Cluj-Napoca, Romania, in October 2020 and sponsored by the International Federation for Information Processing.
34 chapters were carefully peer reviewed and selected from 91 conference submissions. They are organized in the following thematic sections: computing TRIZ; education and pedagogy; sustainable development; tools and techniques of TRIZ for enhancing design; TRIZ and system engineering; TRIZ and complexity; and cross-fertilization of TRIZ for innovation management.
Sustainable design of equipment for process intensification requires a comprehensive and correct identification of relevant stakeholder requirements, design problems and tasks crucial for innovation success. Combining the principles of the Quality Function Deployment with the Importance-Satisfaction Analysis and Contradiction Analysis of requirements gives an opportunity to define a proper process innovation strategy more reliably and to develop an optimal process intensification technology with less secondary engineering and ecological problems.
Additive manufacturing is a rapidly growing manufacturing process for which many new processes and materials are currently being developed. The biggest advantage is that almost any shape can be produced, while conventional manufacturing methods reach their limits. Furthermore, a lot of material is saved because the part is created in layers and only as much material is used as necessary. In contrast, in the case of machining processes, it is not uncommon for more than half of the material to be removed and disposed of. Recently, new additive manufacturing processes have been on the market that enables the manufacturing of components using the FDM process with fiber reinforcement. This opens up new possibilities for optimizing components in terms of their strength and at the same time increasing sustainability by reducing materials consumption and waste. Within the scope of this work, different types of test specimens are to be designed, manufactured and examined. The test specimens are tensile specimens, which are used both for standardized tensile tests and for examining a practical component from automotive engineering used in student project. This project is a vehicle designed to compete in the Shell Eco-marathon, one of the world’s largest energy efficiency competitions. The aim is to design a vehicle that covers a certain distance with as little fuel as possible. Accordingly, it is desirable to manufacture the components with the lowest possible weight, while still ensuring the required rigidity. To achieve this, the use of fiber-reinforced 3D-printed parts is particularly suitable due to the high rigidity. In particular, the joining technology for connecting conventionally and additively manufactured components is developed. As a result, the economic efficiency was assessed, and guidelines for the design of components and joining elements were created. In addition, it could be shown that the additive manufacturing of the component could be implemented faster and more sustainably than the previous conventional manufacturing.
Short-term load forecasting (STLF) has been playing a key role in the electricity sector for several decades, due to the need for aligning energy generation with the demand and the financial risk connected with forecasting errors. Following the top-down approach, forecasts are calculated for aggregated load profiles, meaning the sum of singular loads from consumers belonging to a balancing group. Due to the emerging flexible loads, there is an increasing relevance for STLF of individual factories. These load profiles are typically more stochastic compared to aggregated ones, which imposes new requirements to forecasting methods and tools with a bottom-up approach. The increasing digitalization in industry with enhanced data availability as well as smart metering are enablers for improved load forecasts. There is a need for STLF tools processing live data with a high temporal resolution in the minute range. Furthermore, behin-the-meter (BTM) data from various sources like submetering and production planning data should be integrated in the models. In this case, STLF is becoming a big data problem so that machine learning (ML) methods are required. The research project “GaIN” investigates the improvement of the STLF quality of an energy utility using BTM data and innovative ML models. This paper describes the project scope, proposes a detailed definition for a benchmark and evaluates the readiness of existing STLF methods to fulfil the described requirements as a reviewing paper.
The review highlights that recent STLF investigations focus on ML methods. Especially hybrid models gain more and more importance. ML can outperform classical methods in terms of automation degree and forecasting accuracy. Nevertheless, the potential for improving forecasting accuracy by the use of ML models depends on the underlying data and the types of input variables. The described methods in the analyzed publications only partially fulfil the tool requirements for STLF on company level. There is still a need to develop suitable ML methods to integrate the expanded data base in order to improve load forecasts on company level.
Interaction and capturing information from the surrounding is dominated by vision and hearing. Haptics on the other side, widens the bandwidth and could also replace senses (sense switching) for impaired. Haptic technologies are often limited to point-wise actuation. Here, we show that actuation in two-dimensional matrices instead creates a richer input. We describe the construction of a full-body garment for haptic communication with a distributed actuating network. The garment is divided into attachable-detachable panels or add-ons that each can carry a two dimensional matrix of actuating haptic elements. Each panel adds to an enhanced sensoric capability of the human- garment system so that together a 720° system is formed. The spatial separation of the panels on different body locations supports semantic and theme-wise separation of conversations conveyed by haptics. It also achieves directional faithfulness, which is maintaining any directional information about a distal stimulus in the haptic input.
Konstrukteure im Maschinenbau stehen häufig vor der Problemstellung, hochfest vorgespannte Schraubenverbindungen und einen durchgehenden Korrosionsschutz zu vereinen. Die Normen und Richtlinien bieten hierzu Stand heute keine ausreichenden Antworten. Die Hochschule Offenburg befasst sich im Rahmen einer industriellen Gemeinschaftsforschung mit der Fragestellung, welchen Einfluss organische Beschichtungen auf die Vorspannkraft insbesondere bei erhöhten Umgebungstemperaturen haben. In dieser Arbeit werden die ersten Ergebnisse zum Einfluss der Einzelschichtstärke des Beschichtungssystems präsentiert.
The PHOTOPUR project aims to develop a photocatalytic process as a type of AOPs (Advanced Oxidation Processes) for the elimination of plant protection products (PPP) of the cleaning water used to wash sprayers. At INES a PV based energy supply for the photocatalytic cleaning system was developed within the framework of two bachelor theses and assembled as a demonstration unit. Then the system was step by step extended with further process automation features and pushed to a remote operating device. The final system is now available as a mobile unit mounted on a lab table. The latest step was the photocatalytic reactor module which completed the first PHOTOPUR prototype. The system is actually undergoing an intensive testing phase with performance checks at the consortium partners. First results give an overview about the successful operation.
Plant oils may be used as a sustainable, nearly CO2neutral fuel for diesel engines. This work investigates experimentally the particulate and gaseous emissions of diesel engines fuelled with different non-esterified, pure plant oils. The data are collected from three engines: a) Common rail 1.7 liter passenger car engine from Opel AG b) 12.8 liter truck engine from VOLVO c) Truck engine from MAN AG.
The emissions of the MAN engine have been used to perform AMES tests to analyze possible health impacts of plant oil operation. Finally, all emission results with plant oils have been compared to traditional gas oils.
Non-esterified plant oils gain ecological and economical importance, particularly in the EU where it is intended to increase the share of renewable energies. Plant oils do not require any chemical treatment so do not cause secondary pollution. The importance of plant oil will increase in Germany for mobile and stationary applications. The generation co-generation of heat and power is subsidized by the German “Erneuerbares Energiegesetz” and the “Kraft-Wärme-Kopplungsgesetz” when renewable fuels are used such as plant oils..
Plant oils have a much higher viscosity than conventional gas oil. It is mandatory to decrease the oil viscosity by heating prior to injection to assure proper injection and to avoid engine damage due to coke formation in the combustion chamber and at the injection nozzle. The German quality standard of Weihenstephan (RK-Qualitätsstandard 05/2000) for rape seed oil should be followed for use as diesel fuel. The chemical composition of plant oils is appreciably different in comparison to diesel fuels derived from mineral oils suggesting also different emission behavior.
Vorgestellt wird ein Konzept zur biologischen Methanisierung von Wasserstoff direkt in Biogasreaktoren, mit dem durch Membranbegasung der Methangehalt des Biogases auf > 96 % erhöht werden kann. Essentiell zum Erreichen solch hoher Methanwerte sind die Einhaltung eines optimalen pH-Bereichs und die Vermeidung von H2-Akkumulation. Im Falle einer Limitierung der Methanbildungsrate durch den eigentlichen anaeroben Abbauprozess der Biomasse ist auch eine externe Zufuhr von CO2 zur weiteren Methanbildung denkbar. Das Verfahren soll weiter optimiert und in einem von der Deutschen Bundesstiftung Umwelt geförderten Projekt in der Biogasanlage einer regionalen Käserei in der Praxis getestet werden. Die hier angestrebte Kombination aus dezentraler Abfallverwertung und Eigenenergieerzeugung eines lebensmittelverarbeitenden Betriebs unter Einbindung in ein intelligentes Erneuerbare Energien - Konzept soll einen zusätzlichen Mehrwert liefern.
Process engineering industries are now facing growing economic pressure and societies' demands to improve their production technologies and equipment, making them more efficient and environmentally friendly. However unexpected additional technical and ecological drawbacks may appear as negative side effects of the new environmentally-friendly technologies. Thus, in their efforts to intensify upstream and downstream processes, industrial companies require a systematic aid to avoid compromising of ecological impact. The paper conceptualises a comprehensive approach for eco-innovation and eco- design in process engineering. The approach combines the advantages of Process Intensification as Knowledge-Based Engineering (KBE), inventive tools of Knowledge-Based Innovation (KBI), and main principles and best-practices of Eco-Design and Sustainable Manufacturing. It includes a correlation matrix for identification of eco-engineering contradictions and a process mapping technique for problem definition, database of Process Intensification methods and equipment, as well as a set of strongest inventive operators for eco-ideation.
As engineering graduates and specialists frequently lack the advanced skills and knowledge required to run eco-innovation systematically, the paper proposes a new teaching method and appropriate learning materials in the field of eco-innovation and evaluates the learning experience and outcomes. This programme is aimed at strengthening student’s skills and motivation to identify and creatively overcome secondary eco-contradictions in case if additional environmental problems appears as negative side effects of eco-friendly solutions.
Based on a literature analysis and own investigations, authors propose to introduce a manageable number of eco-innovation tools into a standard one-semester design course in process engineering with particular focus on the identification of eco-problems in existing technologies, selection of the appropriate new process intensification technologies (knowledge-based engineering), and systematic ideation and problem solving (knowledge-based innovation and invention).
The proposed educational approach equips students with the advanced knowledge, skills and competences in the field of eco-innovation. Analysis of the student’s work allows one to recommend simple-to-use tools for a fast application in process engineering, such as process mapping, database of eco-friendly process intensification technologies, and up to 20 strongest inventive operators for solving of environmental problems. For the majority of students in the survey, even the small workload has strengthened their self-confidence and skills in eco-innovation
Growing demands for cleaner production and higher eco-efficiency in process engineering require a comprehensive analysis of technical and environmental outcomes of customers and society. Moreover, unexpected additional technical or ecological drawbacks may appear as negative side effects of new environ-mentally friendly technologies. The paper conceptualizes a comprehensive ap-proach for analysis and ranking of engineering and ecological requirements in process engineering in order to anticipate secondary problems in eco-design and to avoid compromising the environmental or technological goals. For this purpose, the paper presents a method based on integration of the Quality Func-tion Deployment approach with the Importance-Satisfaction Analysis for the requirements ranking. The proposed method identifies and classifies compre-hensively the potential engineering and eco-engineering contradictions through analysis of correlations within requirements groups such as stakehold-er requirements (SRs) and technical requirements (TRs), and additionally through cross-relationship between SRs and TRs.
The 40 Altshuller Inventive Principles with numerous sub-principles remain over decades the most frequently applied tool of the Theory of Inventive Problem Solving TRIZ for systematic idea generation. However, their application often requires a concentrated, creative and abstract way of thinking that can be fairly challenging for the newcomers to TRIZ. This paper describes an approach to reduce the abstraction level of inventive sub-principles and presents the results of the idea generation experiment conducted with three groups of undergraduate and graduate students from different years of study in mechanical and process engineering. The students were asked to generate and to record their individual ideas for three design problems using a pre-defined set of classical and modified sub-principles within 10 minutes. The overall outcomes of the experiment support the assumption that the less abstract wording of the modified sub-principles leads to higher number of ideas. The distribution of ideas between the fields of MATCHEM-IBD (Mechanical, Acoustic, Thermal, Chemical, Electrical, Magnetic, Intermolecular, Biological and Data processing) differs significantly between groups using modified and abstract sub-principles.
Classification of TRIZ Inventive Principles and Sub-Principles for Process Engineering Problems
(2019)
The paper proposes a classification approach of 40 Inventive Principles with an extended set of 160 sub-principles for process engineering, based on a thorough analysis of 155 process intensification technologies, 200 patent documents, 6 industrial case studies applying TRIZ, and other sources. The authors define problem-specific sub-principles groups as a more precise and productive ideation technique, adaptable for a large diversity of problem situations, and finally, examine the anticipated variety of ideation using 160 sub-principles with the help of MATCEM-IBD fields.
Industrie 4.0 bedeutet nicht nur einen Wandel der technischen Möglichkeiten und Arbeitsbedingungen, sondern auch einen Bedarf an neuen, sich kontinuierlich weiterentwickelnden Kompetenzen und die Bereitschaft der Beschäftigten, Veränderungen mitzugestalten. Spielerische Ansätze der Kompetenzentwicklung können v.a. bei weiterbildungsfernen Mitarbeitern hilfreich sein, um das komplexe Thema verständlich zu vermitteln. Der Beitrag beschreibt ein Seminarkonzept mit integriertem Brettspiel, mit dem Teilnehmer anhand eines fiktiven Unternehmens (Müller GmbH) die Transformation eines Unternehmens in die Industrie 4.0 spielerisch nachvollziehen. Dieses Konzept erweist sich in einer ersten Evaluation als durchaus vielversprechend.
The ability to change aerodynamic parameters of airfoils during flying can potentially save energy as well as reducing the noise made by the unmanned aerial vehicles (UAV) because of sharp edges of the airfoil and its rudders. In this paper, an approach for the design of an adaptive wing using a multi-material 3D printer is shown. In multi-material 3D printing, up to six different materials can be combined in one component. Thus, the user can determine the mixture and the spatial arrangement of this “digital material” in advance in the pre-processing software. First, the theoretical benefits of adaptive wings are shown, and already existing adaptive wings and concepts are explicated within a literature review. Then the additive manufacturing process using photopolymer jetting and its capabilities to print multiple materials in one part are demonstrated. Within the scope of a case study, an adaptive wing is developed and the necessary steps for the product development and their implementation in CAD are presented. This contribution covers the requirements for different components and sections of an adaptive wing designed for additive manufacturing using multiple materials as well as the single steps of development with its different approaches until the final design of the adaptive wing. The developed wing section is simulated, and qualitative tests in a wind tunnel are carried out with the wing segment. Finally, the additively manufactured wing segment is evaluated under technical and economic aspects.
Model-based analysis of Electrochemical Pressure Impedance Spectroscopy (EPIS) for PEM Fuel Cells
(2019)
Electrochemical impedance spectroscopy (EIS) is a widely-used diagnostic technique to characterize electrochemical processes. It is based on the dynamic analysis of two electrical observables, that is, current and voltage. Electrochemical cells with gaseous reactants or products, in particular fuel cells, offer an additional observable, that is, the gas pressure. The dynamic coupling of current or voltage with gas pressure gives rise to a number of additional impedance definitions, for which we have previously introduced the term electrochemical pressure impedance spectroscopy (EPIS) [1,2]. EPIS shows a particular sensitivity towards transport processes of gas-phase or dissolved species, in particular, diffusion coefficients and transport pathway lengths. It is as such complementary to standard EIS, which is mainly sensitive towards electrochemical processes. First EPIS experiments on PEM fuel cells have recently been shown [3].
We present a detailed modeling and simulation analysis of EPIS of a PEM fuel cell. We use a 1D+1D continuum model of a fuel/air channel pair with GDL and MEA. Backpressure is dynamically varied, and the resulting simulated oscillation in cell voltage is evaluated to yield the ▁Z_( V⁄p_ca ) EPIS signal. Results are obtained for different transport situations of the fuel cell, giving rise to very complex EPIS shapes in the Nyquist plot. This complexity shows the necessity of model-based interpretation of the complex EPIS shapes. Based on the simulation results, specific features in the EPIS spectra can be assigned to different transport domains (gas channel, GDL, membrane water transport).
The development of new processes and materials for additive manufacturing is currently progressing rapidly. In order to use the advantages of additive manufacturing, however, product development and design must also be adapted to these new processes. Therefore it is suitable to use structural optimization. To achieve the best results in lightweight design, it is important to have an approach that reduces the volume in the unloaded regions and considers the restrictions and characteristics of the additive manufacturing process. In this contribution, a case study using a humanoid robot is presented. Thus, the pelvis module of a humanoid robot is optimized regarding its weight and stiffness. Furthermore, an integrated design is implemented in order to reduce the number of parts and the screw connections. The manufacturing uses a new aluminum-based material that has been specially developed for use in additive manufacturing and lightweight construction. For the additive manufacturing by means of the Selective Laser Melting (SLM) process, different restrictions and the assembly concepts of the humanoid robot have to be taken into account. These restrictions have to be considered in the setting of the individual parameters and target functions of the structural optimization. As a result, a framework is presented that shows the steps of the redesign and the optimization of the pelvis module. In order to achieve high accuracy with the product, the redesign of the pelvis module is demonstrated with regard to mechanical and thermal postprocessing. Finally, the redesigned part and the different assembly concepts are compared to analyze the economic and technical effects of the optimization.
Die Studienanfänger in den technischen Studiengängen der Hochschulen für angewandte Wissenschaften haben nicht nur in Mathematik sondern auch in Physik sehr unterschiedliche Vorkenntnisse. Obwohl diese Fächer für das grundlegende Verständnis technischer Vorgänge von großer Bedeutung sind, kann die Ausbildung in diesen Bereichen angesichts der begrenzten dafür im Verlauf des Studiums zur Verfügung stehenden Zeitfenster nicht bei Null anfangen. Für Mathematik wurde daher von der Arbeitsgruppe cosh ein Mindestanforderungskatalog zusammengestellt und 2014 veröffentlicht. Er beschreibt Kenntnisse und Fertigkeiten, die Studienanfänger zur erfolgreichen Aufnahme eines WiMINT-Studiums (Wirtschaft, Mathematik, Informatik, Naturwissenschaft, Technik) an einer Hochschule benötigen. Inzwischen hat sich nun eine Arbeitsgruppe von Physikerinnen und Physikern an Hochschulen in Baden-Württemberg gebildet, deren Ziel es ist, einen analogen Mindestanforderungskatalog für den Bereich Physik zu erstellen. Hier wird der aktuell erreichte Stand der Arbeiten vorgestellt.
As part of the design education at Offenburg University, the teaching in technical documentation is continuously optimised. In this study, numerous mechanical engineering students, ages 19 to 29, are observed using the eye tracking technology and a video camera while performing various design exercises. The aim of the study is to enhance the students’ ability to read, understand and analyse complex engineering drawings. In one experiment, the students are asked to perform the “cube perspective test” after Stumpf and Fay to assess their ability for mental rotation as part of spatial visualization ability. Furthermore, the students are asked to prepare and give micro presentations on a topic related to their studies. Students have a maximum of 100 s time for these presentations. Thus, they can practise presenting important information in a short amount of time, show their rhetorical skills and demonstrate their acquisition of basic knowledge. During the presentation, the eye movement of a few selected students is recorded to analyse their information acquisition. In a further test, the students’ eye movements are analysed while reading an engineering drawing that consists of multiple views. All the spatial connections have to be included based on the different component views. Including these and their acquired knowledge, the students are asked to identify the correct representation of a component view. Furthermore the subjects are describing the function of an assembly, a parallel gripper and then they are to mentally disassemble the assembly to replace a damaged cylindrical pin. Simultaneously, they are filmed using a video camera to see which terms the students use for the individual technical terms. The evaluation of the eye movements shows that the increasing digitalisation of society and the use of electronic devices in everyday life lead to fast and only selective perceptual behaviour and that students feel insecure when dealing with technical drawings. The analysis of the videos shows a mostly non-technical and inaccurate manner of expression and a poor use of technical terms. The transferability of the achieved results to other technical tasks is part of further investigations.
Thin-layer chromatography is a rapid and reliable working method for quantification of mycotoxins which is suitable for checking EC legislation aflatoxin limits for dried figs without an RP-18 pre-column cleaning step. We describe normal-phase chromatography on silica gel plates with 2.4:0.05:0.1:0.05 ( v/v ) methyl t -butyl ether-water-methanol-cyclohexane as mobile phase and reversed-phase chromatography on RP-18 plates with methanol-4% aqueous ZnSO 4 solution-ethyl methyl ketone 15:15:3 ( v/v ) as mobile phase. Sample pretreatment was by modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged, Safe) extraction with tetrahydrofuran or acetone. NaCl was used as QuEChERS salt. Response was a linear function of amount chromatographed in the ranges 3 to 100 pg per zone for aflatoxins B 2 and G 2 , 10 to 350 pg per zone for the aflatoxins B 1 and G 1 , and 0.25 to 2.5 ng per zone for ochratoxin A. Quantification limits for the aflatoxins were between 13 and 35 pg per zone (equivalent to 1.5 and 2.4 ppb, taking the pre-treatment procedure into account). Ochratoxin A was detectable with a limit of quantification of 970 pg per zone, corresponding to 56 ppb in the sample. Normal phase and RP-18 separations work rapidly, reliably, and at low cost. They are also suitable for checking the content of the mycotoxins patulin, penicillic acid, zearalenone, and deoxynivalenol.
The identification and quantification of compounds in the gas phase becomes of increasing interest in the context of environmental protection, as well as in the analytical field. In this respect, the high extinction coefficients of vapours and gases in the ultraviolet wavelength region allow a very sensitive measurement system. In addition, the increased performance of the components necessary for setting up a measurement system, such as fibres, light sources and detectors has been improved. In particular the light sources and detectors offer improved stability, and the deep UV performance and solarisation resistance of fused silica fibres allow have been significantly optimized in the past years. Therefore a compact and reliable detection system with high measuring accuracy is developed. Within this paper possible applications of the system under development and recent results will be discussed.
The identification and quantification of compounds in the gas phase becomes of increasing interest in the context of environmental protection, as well as in the analytical field. In this respect, the high extinction coefficients of vapours and gases in the ultraviolet wavelength region allow a very sensitive measurement system. In addition, the increased performance of the components necessary for setting up a measurement system, such as fibres, light sources and detectors has been improved. In particular the light sources and detectors offer improved stability, and the deep UV performance and solarisation resistance of fused silica fibres allow have been significantly optimized in the past years. Therefore a compact and reliable detection system with high measuring accuracy is developed. Within this paper possible applications of the system under development and recent results will be discussed.
HPTLC (High Performance Thin Layer Chromatography) is a well known and versatile separation method which shows a lot of advantages and options in comparison to other separation techniques. The method is fast and inexpensive and does not need time-consuming pretreatments. Using fiber-optic elements for controlled light-guiding, the TLC-method was significantly improved: the new HPTLC-system is able to measure simultaneously at different wavelengths without destroying the plate surface or the analytes on the surface. For registration of the sample distribution on a HPTLC-plate we developed a new and sturdy diode-array HPTLC- scanner which allows registration of spectra on the TLC- plates in the range of 198 nm to 610 nm with a spectral resolution better than 1.2 nm. The spatial resolution on plate is better than 160 micrometers . In the spectral mode, the new HPTLC-scanner delivers much more information than the commonly used TLC-scanner. The measurement of 450 spectra of one separation track does not need more than three minutes. However, in the fixed wavelength mode the contour plot can be measured within 15 seconds. In this case, the signal will be summarized and averaged over a spectral range having FWHM from 10 nm to 25 nm depending on the substance under test. The new diode-array HPTLC-scanner makes various chemometric applications possible. The new method can be used easily in clinical diagnostic systems easily, e.g. for blood and uring investigations. In addition, new applications are possible. For example, the rich structured PAHs were studied. Although the separation is incomplete the 16 compounds can be quantified using suitable wavelengths.
HPTLC (High Performance Thin Layer Chromatography) is a well known and versatile separation method which shows many advantages when compared to other separation techniques. The method is fast and inexpensive and does not need time-consuming pretreatments. For visualisation of the sample distribution on a HPTLC-plate we developed a new and sturdy HPTLC-scanner. The scanner allows simultaneous registrations of spectra in a range from 198 nm to 612 nm with a spectral resolution of better than 0.8 nm. The on-plate spatial resolution is better than 160 μm. The measurement of 450 spectra in one separation track does not need more than two minutes. The new diode-array scanner offers a fast survey over a TLC-separation and makes various chemometric applications possible. For compound identification a cross-correlation function is described to compare UV sample spectra with appropriate library data. The cross-correlation function herein described can also be used for purity testing. Unresolved peaks can be virtually separated by use of a least squares fit algorithm. In summary, the diode arry system delivers much more information than the commonly used TLC-scanner.
A prototype multiwavelength sensor able to characterise soot emissions in Diesel exhaust in terms of size and concentration has been tested against other methods for diesel particle measurements like electrical mobility sizing (SMPS) and raw exhaust gravimetric sampling (RES). Measurements carried out with the prototype sensor were correlated with the SMPS by assuming spherical and/or fractal aggregate morphology of the particles. Correlation of RES gravimetric data against the sensor and the SMPS led to the calculation of the solid density for soot particles to be 2.3 gr/cm3.
Modelling detailed chemistry in lithium-ion batteries: Insight into performance, ageing and safety
(2018)
Colored glass products with various printing technologies are becoming more important in industry. The aim is to achieve individual solution in a very short delivery time. Conventional thermal treatment of burning glasses in oven for tempered color printing has predominant issues with high time consumption, energy consumption and manufacturing cost. It requires alternative process development.
This paper proposes laser process to overcome issues in conventional treatment with the latest results of tempering colored glass. Samples have been analyzed with the scanning electron microscope (SEM). Two different laser systems have been applied and the glass has been printed with black paste.
Economic growth and ecological problems have pushed industries to switch to eco-friendly technologies. However, environmental impact is still often neglected since production efficiency remains the main concern. Patent analysis in the field of process engineering shows that, on the one hand, some eco-issues appear as secondary problems of the new technologies, and on the other hand, eco-friendly solutions often show lower efficiency or performance capability. The study categorizes typical environmental problems and eco-contradictions in the field of process engineering involving solids handling and identifies underlying inventive principles that have a higher value for environmental innovation. Finally, 42 eco-innovation methods adapting TRIZ are chronologically presented and discussed.
Accelerated transformation of the society and industry through digi-talization, artificial intelligence and other emerging technologies has intensified the need for university graduates that are capable of rapidly finding breakthrough solutions to complex problems, and can successfully implement innovation con-cepts. However, there are only few universities making significant efforts to com-prehensively incorporate creative and systematic tools of TRIZ (theory of in-ventive problem solving) and KBI (knowledge-based innovation) into their de-gree structure. Engineering curricula offer little room for enhancing creativity and inventiveness by means of discipline‐specific subjects. Moreover, many ed-ucators mistakenly believe that students are either inherently creative, or will in-evitably obtain adequate problem-solving skills as a result of their university study. This paper discusses challenges of intelligent integration of TRIZ and KBI into university curricula. It advocates the need for development of standard guidelines and best-practice recommendations in order to facilitate sustainable education of ambitious, talented, and inventive specialists. Reflections of educa-tors that teach TRIZ and KBI to students from mechanical, electrical, process engineering, and business administration are presented.
The comprehensive assessment method includes 80 innovation performance parameters and 10 key indicators of innovation capability, such as innovation process performance, innovating system performance, market and customer orientation, technology orientation, creativity, leadership, communication and knowledge management, risk and cost management, innovative climate, and innovation competences. The cross-industry study identifies parameters critical for innovation success and reveals different innovation performance patterns in companies.
CONTEXT
The paper addresses the needs of medium and small businesses regarding qualification of R&D specialists in the interdisciplinary cross-industry innovation, which promises a considerable reduction of investments and R&D expenditures. The cross-industry innovation is commonly understood as identification of analogies and transfer of technologies, processes, technical solutions, working principles or business models between industrial sectors. However, engineering graduates and specialists frequently lack the advanced skills and knowledge required to run interdisciplinary innovation across the industry boundaries.
PURPOSE
The study compares the efficiency of the cross-industry innovation methods in one semester project-oriented course. It identifies the individual challenges and preferred working techniques of the students with different prior knowledge, sets of experiences, and cultural contexts, which require attention by engineering educators.
APPROACH
Two parallel one-semester courses were offered to the mechanical and process engineering students enrolled in bachelor’s and master’s degree programs at the faculty of mechanical and process engineering. The students from different years of study were working in 12 teams of 3…6 persons each on different innovation projects, spending two hours a week in the classroom and additionally on average two hours weekly on their project research. Students' feedback and self-assessments concerning gained skills, efficiency of learned tools and intermediate findings were documented, analysed, and discussed regularly along the course.
RESULTS
Analysis of numerous student projects allows to compare and to select the tools most appropriate for finding cross-industry solutions, such as thinking in analogies, web monitoring, function-oriented search, databases of technological effects and processes, special creativity techniques and others. The utilization of learned skills in practical innovation work strengthens the motivation of students and enhances their entrepreneurial competences. Suggested learning course and given recommendations help facilitate sustainable education of ambitious specialists.
CONCLUSIONS
The structured cross-industry innovation can be successfully run as a systematic process and learned in one semester course. The choice of the preferred working teqniques made by the students is affected by their prior knowledge in science, practical experience, and cultural contexts. Major outcomes of the students’ innovation projects such as feasibility, novelty and customer value of the concepts are primarily influenced by students’ engineering design skills, prior knowledge of the technologies, and industrial or business experience.
With the need for automatic control based supervisory controllers for complex energy systems, comes the need for reduced order system models representing not only the non-linear behaviour of the components but also certain unknown process dynamics like their internal control logic. At the Institute of Energy Systems Technology in Offenburg we have built a real-life microscale trigeneration plant and present in this paper a rational modelling procedure that satisfies the necessary characteristics for models to be applied in model predictive control for grid-reactive optimal scheduling of this complex energy system. These models are validated against experimental data and the efficacy of the methodology is discussed. Their application in the future for the optimal scheduling problem is also briefly motivated.
Im Rahmen der Konstruktionsausbildung an der Hochschule Offenburg wird die Lehre im Fach Technische Dokumentation fortlaufend optimiert. In der vorliegenden Laborstudie wurde das visuelle Wahrnehmen von 34 Maschinenbaustudierenden (2w + 32m) im Alter von 19 bis 29 Jahren mithilfe der Eye-Tracking-Technik und einer Videokamera bei der Analyse einer Baugruppenzeichnung beobachtet.
Freiwillige Fachtutorien erreichen aus unterschiedlichen Gründen nicht alle Studierenden. Allein der subjektive Eindruck, dass zu wenige Ressourcen seitens der Hochschule (Übungsräume, studentische Tutoren, lückenlose Stundenplanpassung) oder der Studierenden (Zeit, Motivation) zur Verfügung stünden, führt zu Absenzen bei freiwilligen Präsenztutorien. Um die empfundenen und realen Begrenzungen dieser Veranstaltungen zu verringern, wurden für den Studiengang Maschinenbau die Musterlösungen der Übungsaufgaben Physik und Mathematik in Form von Videoclips erstellt und über die Lernplattform Moodle für alle Studierende des Semesters bereitgestellt. Die Clips beziehen sich jeweils auf eine Teilaufgabe und besitzen die Länge eines typischen Youtube-Tutorials. In etwa 5 Minuten bieten sie dem Zuschauer einen Lösungsweg zu den jeweiligen Übungsaufgaben. Die Studierenden können die Clips alternativ oder ergänzend zur Präsenzveranstaltung nutzen. Bei der Erstellung der Clips wurde auf den Einsatz von Spezialeffekten wie Animationen etc. zugunsten einer effizienten Produktion verzichtet, so dass eine einzelne Lehrperson pro Stunde etwa 10 bis 20 Minuten Videoclips aufzeichnen kann. Die Auswertung der Zugriffszahlen auf die Clip-Dateien ermöglicht eine aufgabengenaue Ermittlung der aktiven Nutzer. Im Betrag wird eine vorläufige Auswertung der Teilnehmerzahl und der Korrelation zwischen Klausurergebnis und Nutzungsgrad präsentiert.
Hot work tools are subjected to complex thermal and mechanical loads during hot forming processes. Locally, the stresses can exceed the material’s yield strength in highly loaded areas as e.g. in small radii in die cavities. To sustain the high loads, the hot forming tools are typically made of martensitic hot work steels. While temperatures for annealing of the tool steels usually lie in the range between 400 and 600 °C, the steels may experience even higher temperatures during hot forming, resulting in softening of the material due to coarsening of strengthening particles. In this paper, a temperature dependent cyclic plasticity model for the martensitic hot work tool steel 1.2367 (X38CrMoV5-3) is presented that includes softening due to particle coarsening and that can be applied in finite-element calculations to assess the effect of softening on the thermomechanical fatigue life of hot work tools. To this end, a kinetic model for the evolution of the mean size of secondary carbides based on Ostwald ripening is coupled with a cyclic plasticity model with kinematic hardening. Mechanism-based relations are developed to describe the dependency of the mechanical properties on carbide size and temperature. The material properties of the mechanical and kinetic model are determined on the basis of tempering hardness curves as well as monotonic and cyclic tests.
VDI Standard 4521: Status
(2016)
VDI Guideline 4521 Part 1: “Inventive problem solving with TRIZ: Part 1 – Fundamentals and definitions” has been published on 2015-04-01. The standard will sharpen the image of TRIZ, facilitate cooperation, and support studying and teaching. It is not a textbook but concisely summarizes basic assumptions of TRIZ and its terminology. It gives an overview on specific methods and tools which will be described in the following parts.
In this paper the fatigue life of three cast iron materials, namely EN-GJS-700, EN-GJV-450 and EN-GJL-250, is predicted for combined thermomechanical fatigue and high cycle fatigue loading. To this end, a mechanism-based model is used, which is based on microcrack growth. The model considers crack growth due to low frequency loading (thermomechanical and low cycle fatigue) and due to high cycle fatigue. To determine the model parameters for the cast iron materials, fatigue tests are performed under combined loading and crack growth is measured at room temperature using the replica technique. Superimposed high cycle fatigue leads to an accelerated crack growth as soon as a critical crack length and thus the threshold stress intensity factor is exceeded. The model takes this effect into account and predicts the fatigue lives of all cast iron materials investigated under combined loadings very well.
Sustainable Aspects force a building manager to continuous observation of actual states and developments concerning building use, energy and media flows.In the presented approach a communication structure was built up to use different software applications and tools in order to optimize the operation of the building.
HiSiMo cast irons are frequently used as material for high temperature components in engines as e.g. exhaust manifolds and turbo chargers. These components must withstand severe cyclic mechanical and thermal loads throughout their life cycle. The combination of thermal transients with mechanical load cycles results in a complex evolution of damage, leading to thermomechanical fatigue (TMF) of the material and, after a certain number of loading cycles, to failure of the component. In Part I of the paper, a fracture mechanics model for TMF life prediction was developed based on results of uniaxial tests. In this paper (Part II), the model is formulated for three-dimensional stress states, so that it can be applied in a post-processing step of a finite-element analysis. To obtain reliable stresses and (time dependent plastic) strains in the finite-element calculation, a time and temperature dependent plasticity model is applied which takes non-linear kinematic hardening into account. The material properties of the model are identified from the results of the uniaxial test. The plasticity model and the TMF life model are applied to assess the lifetime of an exhaust manifold.
Höchste Korrosionsschutzanforderungen sind für bestimmte technische Produkte insbesondere im Offshore Anwendungsbereich, nach ISO 20340, zwingend zu erfüllen, um deren Funktion und Betriebssicherheit dauerhaft gewährleisten zu können. Bis heute werden viele dieser Produkte am Ende ihrer Wertschöpfungskette nass überlackiert, mit einer kompletten Kunststoffhaut, der Korrosionsschutz-Lackschicht, überzogen. Diese Lackierung ist unter anderem deshalb erforderlich, weil es im klassischen Maschinenbau, insbesondere in der Antriebstechnik, viele mechanische Schnittstellen gibt, die vor der endgültigen Produktmontage quasi metallisch blank bleiben müssen, um den erforderlichen und definierten geometrischen Oberflächenzustand nach Form und Lage als Pass- und Fügefläche zu gewährleisten. Eine dieser mechanischen Schnittstellen sind Schraubenverbindungen. Mit dem derzeit gültigen Regelwerk ist die Berechnung einer Schraubenverbindung mit Lackschichten in den Trennfugen oder auf der Kopf- und Mutternauflagefläche nicht möglich, da lackierte Bauteile in der derzeit geltenden VDI-Richtlinie 2230 nicht berücksichtigt sind. Nach einem Praxisbericht anhand von Stellantrieben für Industriearmaturen über deren Umstellung von Nasslackierung des Gesamtproduktes auf Pulverbeschichtung von Einzelteilen wird die experimentelle Validierung der Betriebs- und Funktionssicherheit von Schraubenverbindungen mit lackierten Bauteilen vorgestellt. Daraus resultierend wurde im März 2014 an der Hochschule Offenburg ein Forschungsprojekt gestartet, dessen Ziel es ist für die oben genannte Problemstellung einen systematischen Lösungsansatz zu erarbeiten. Künftig soll es Entwicklungsingenieuren und Konstrukteuren bereits in der Phase von Entwicklung und Konstruktion möglich sein Schraubenverbindungen mit lackierten Bauteilen zuverlässig zu berechnen und auszulegen oder diese in der Prototypenphase zuverlässig zu testen. Die letzten beiden Abschnitte geben den Lösungsansatz und den aktuellen Stand der Forschung wider.
Die Untersuchungen der Hochschule Offenburg zeigen, dass es durch organische Korrosionsschutzschichten im Kraftfluss von Schraubenverbindungen nicht zu einem verfrühten Abschalten der streckgrenzengesteuerten Schraubmontage kommt. Die fünf untersuchten Lacksysteme zeigten ein sehr unterschiedliches Reibverhalten, der Anzugsvorgang wurde jedoch zuverlässig bei Erreichen der Schraubenstreckgrenze beendet. Durch den ermittelten Drehmoment/Drehwinkelverlauf lässt sich das streckgrenzengesteuerte Anzugsverfahren als Analystetool einsetzen, wodurch für den jeweiligen Schraubfall auch Rückschlüsse auf anderen Anzugsverfahren getroffen werden können. Des Weiteren zeigte sich, dass Pulverlacksysteme widerstandsfähiger gegen die bei der Montage wirkenden Belastungen sind und eine Montage direkt auf Lack ermöglichen können.
HiSiMo cast irons are frequently used as material for high temperature components in engines as e.g. exhaust manifolds and turbo chargers. These components must withstand severe cyclic mechanical and thermal loads throughout their service life. The combination of thermal transients with mechanical load cycles results in a complex evolution of damage, leading to thermomechanical fatigue (TMF) of the material and, after a certain number of loading cycles, to failure of the component. In this paper (Part I), the low-cycle fatigue (LCF) and TMF properties of HiSiMo are investigated in uniaxial tests and the damage mechanisms are addressed. On the basis of the experimental results a fatigue life model is developed which is based on elastic, plastic and creep fracture mechanics results of short cracks, so that time and temperature dependent effects on damage are taken into account. The model can be used to estimate the fatigue life of components by means of finite-element calculations (Part II of the paper).
We herein present a topology design method based on local optimality criteria which has been implemented in an open source Navier-Stokes solver for turbulent flows. Our method aims for the fast generation of geometry proposals in the early conceptual phase. To the best of our knowledge, this is the first local criteria approach utilizing a wall function turbulence model in order to consider turbulent flows. In order to allow for the growth as well as the shrinkage, or even the formation or disappearance of structural features, a topological approach is chosen. By introducing a volume fraction parameter, we distinguish between fluid and solid properties in each control volume. The fluid-solid interface is represented by an immersed boundary method using a piecewise linear surface reconstruction.
The uncertain and time-variant nature of renewable energy results in the need to deal with peaks in the production of energy. One approach is to achieve a load shift and thereby help balancing the grid by using thermally Activated Building Systems (TABS). Control systems currently in place do not exploit the full potential of TABS. This paper reviews how Model Predictive Control can possibly reduce the fluctuations of the demand and supply of (renewable) energy as it enables the TABS to react to the dynamics of weather and its impact on the grid at any time.
Combined heat and power production (CHP) based on solid oxide fuel cells (SOFC) is a very promising technology to achieve high electrical efficiency to cover power demand by decentralized production. This paper presents a dynamic quasi 2D model of an SOFC system which consists of stack and balance of plant and includes thermal coupling between the single components. The model is implemented in Modelica® and validated with experimental data for the stack UI-characteristic and the thermal behavior. The good agreement between experimental and simulation results demonstrates the validity of the model. Different operating conditions and system configurations are tested, increasing the net electrical efficiency to 57% by implementing an anode offgas recycle rate of 65%. A sensitivity analysis of characteristic values of the system like fuel utilization, oxygen-to-carbon ratio and electrical efficiency for different natural gas compositions is carried out. The result shows that a control strategy adapted to variable natural gas composition and its energy content should be developed in order to optimize the operation of the system.
Process engineering focuses on the design, operation, control and optimization of chemical, physical and biological processes and has applications in many industries. Process Intensification is the key development approach in the modern process engineering. The proposed Advanced Innovation Design Approach (AIDA) combines the holistic innovation process with the systematic analytical and problem solving tools of the theory of inventive problem solving TRIZ. The present paper conceptualizes the AIDA application in the field of process engineering and especially in combination with the Process Intensification. It defines the AIDA innovation algorithm for process engineering and describes process mapping, problem ranking, and concept design techniques. The approach has been validated in several industrial case studies. The presented research work is a part of the European project “Intensified by Design® platform for the intensification of processes involving solids handling”.
The collection of selected papers of the TRIZ Future Conference 2017 is in open access and is included to the Innovator, the journal of the European TRIZ Assocation.
The paper is addressing the needs of the universities regarding qualification of students as future R&D specialists in efficient techniques for successfully running innovation process. In comparison with the engineers, the students often demonstrate lower motivation in learning systematic inventive techniques, like for example TRIZ methodology, and prefer random brainstorming for idea generation. The quality of obtained solutions also depends on the level of completeness of the problem analysis, which is more complex and time consuming in the case of interdisciplinary systems. The paper briefly describes one-semester-course of 60 hours in new product development with the Advanced Innovation Design Approach and TRIZ methodology, in which a typical industrial innovation process for one selected interdisciplinary mechatronic product is modelled.
In the course of the last few years, our students are becoming increasingly unhappy. Sometimes they stop attending lectures and even seem not to know how to behave correctly. It feels like they are getting on strike. Consequently, drop-out rates are sky-rocketing. The lecturers/professors are not happy either, adopting an “I-don’t-care” attitude.
An interdisciplinary, international team set in to find out: (1) What are the students unhappy about? Why is it becoming so difficult for them to cope? (2) What does the “I-don’t-care” attitude of professors actually mean? What do they care or not care about? (3) How far do the views of the parties correlate? Could some kind of mutual understanding be achieved?
The findings indicate that, at least at our universities, there is rather a long way to go from “Engineering versus Pedagogy” to “Engineering Pedagogy”.
Viele hochbeanspruchte Bauteile müssen zur Erfüllung ihres konstruktiven Zwecks mit Durchdringungskerben versehen werden. Infolge der gegenseitigen Wechselwirkung gelten für die Kerbwirkung dieser Art von Mehrfachkerben andere Gesetzmäßigkeiten als bei Einzelkerben. Die Weiterentwicklung der Lehre von der Tragfähigkeitsberechnung höchstbeanspruchter Maschinenelemente macht es notwendig, sich mit der Durchdringungskerbwirkung eingehend zu befassen. Thum und Svenson [1] entwickelten im Jahr 1949 ein Näherungsverfahren zur Abschätzung der Formzahl an einem zugbelasteten Stab mit Durchdringungskerben. In vielen Lehrbüchern findet dieses Verfahren Anwendung. Aus heutiger Sicht erscheint die Eignung der aus diesem Ansatz erzielten Ergebnisse als dringend überprüfungswürdig. Das thum’sche Verfahren wird unter die Lupe genommen. Der hier vorliegende Beitrag präsentiert mit Hilfe der Finiten-Elemente-Methode (FEM) neue Untersuchungsergebnisse an zugbeanspruchten Stäben mit Halbkreisnut und überlagerter Querbohrung. Diese ergaben, dass die Berechnung nach [1] Lücken aufweist. Ihr Ansatz stellt für den heutigen Entwicklungsstand eine mit zu großen Abweichungen behaftete Näherungshypothese dar.
Three real-lab trigeneration microgrids are investigated in non-residential environments (educational, office/administrational, companies/production) with a special focus on domain-specific load characteristics. For accurate load forecasting on such a local level, à priori information on scheduled events have been combined with statistical insight from historical load data (capturing information on not explicitly-known consumer behavior). The load forecasts are then used as data input for (predictive) energy management systems that are implemented in the trigeneration microgrids. In real-world applications, these energy management systems must especially be able to carry out a number of safety and maintenance operations on components such as the battery (e.g. gassing) or CHP unit (e.g. regular test runs). Therefore, energy management systems should combine heuristics with advanced predictive optimization methods. Reducing the effort in IT infrastructure the main and safety relevant management process steps are done on site using a Smart & Local Energy Controller (SLEC) assisted by locally measured signals or operator given information as default and external inputs for any advanced optimization. Heuristic aspects for local fine adjustment of energy flows are presented.
A former remote area power supply was converted to a smart cogeneration subnet with combined heat and power to develop and validate a forecast based energy management at the University of Applied Sciences in Offenburg/Germany. Locally processed weather forecasts and forecasted demand profiles are integrated to allow a precise reaction to changes of fluctuating power sources, changes in scheduled demand profiles and to improve the energy efficiency of the supply. The management of the electrical and thermal storages is influenced by the forecasted energy contributions and the forecasted demand. Further approaches should improve the accuracy of forecasting algorithms and integrate parameter models gained of a detailed monitoring to realize predictive controllers.
For the RoboCup Soccer AdultSize League the humanoid robot Sweaty uses a single fully convolutional neural network to detect and localize the ball, opponents and other features on the field of play. This neural network can be trained from scratch in a few hours and is able to perform in real-time within the constraints of computational resources available on the robot. The time it takes to precess an image is approximately 11 ms. Balls and goal posts are recalled in 99 % of all cases (94.5 % for all objects) accompanied by a false detection rate of 1.2 % (5.2 % for all). The object detection and localization helped Sweaty to become finalist for the RoboCup 2017 in Nagoya.
One of the challenges in humanoid robotics is motion control. Interacting with humans requires impedance control algorithms, as well as tackling the problem of the closed kinematic chains which occur when both feet touch the ground. However, pure impedance control for totally autonomous robots is difficult to realize, as this algorithm needs very precise sensors for force and speed of the actuated parts, as well as very high sampling rates for the controller input signals. Both requirements lead to a complex and heavy weight design, which makes up for heavy machines unusable in RoboCup Soccer competitions.
A lightweight motor controller was developed that can be used for admittance and impedance control as well as for model predictive control algorithms to further improve the gait of the robot.
Simulation-based degradation assessment of lithium-ion batteries in a hybrid electric vehicle
(2017)
The insufficient lifetime of lithium-ion batteries is one of the major cost driver for mobile applications. The battery pack in vehicles is one of the most expensive single components that practically must be excluded from premature replacement (i.e., before the life span of the other components end). Battery degradation is a complex physicochemical process that strongly depends on operating condition and environment. We present a simulation-based analysis of lithium-ion battery degradation during operation with a standard PHEV test cycle. We use detailed multiphysics (extended Newman-type) cell models that allow the assessment of local electrochemical potential, species and temperature distributions as driving forces for degradation, including solid electrolyte interphase (SEI) formation [1]. Fig. 1 shows an exemplary test cycle and the predicted resulting spatially-averaged SEI formation rate. We apply a time-upscaling approach to extrapolate the degradation analysis over long time scales, keeping physical accuracy while allowing end-of-life assessment [2]. Results are presented for lithium-ion battery cells with graphite/LFP chemistry. The behavior of these cells in terms of degradation propensity, performance, state of charge and other internal states is predicted during long-term cycling. State of health (SOH) is quantified as capacity fade and internal resistance increase as function of operation time.
Practical bottlenecks associated with commercialization of Lithium-air cells include capacity limitation and low cycling efficiency. The origin of such losses can be traced to complex electrochemical side reactions and reactant mass transport losses[1]. The efforts to minimize such losses include exploration of various electrolytes with additives[2], and cell component geometry and material design. Given the wide range of options for such materials, it is almost impractical to experimentally setup and characterize all those cells. Consequently, modeling and simulation studies are efficient alternatives to analyze spatially and temporally resolved cell behavior for various combinations of materials[3]. In this study, with the help of a two-dimensional multi physics model, we have focused on the effect of electrode and electrolyte interaction (electrochemistry), choice of electrolyte (species transport), and electrode geometry (electrode design) on the performance of a lithium-air button cell. Figure1a shows the schematics of the 2D axisymmetric computational domain. A comparative analysis of five different electrolytes was performed while focusing on the 2D distribution of local current density and the concentration of electro-chemically active species in the cell, that is, O2and Li+. Using two different cathode configurations, namely, flooded electrode and gas diffusion electrode (GDE)[4] at different cathode thickness, the effect of cell geometry and electrolyte saturation on cell performance was explored. Further, a detailed discussion on electrode volume utilization (cf. Figure1b) is presented via changes in the active volume of cathode that produces 90% of the total current with the cell current density for different combinations of electrolyte saturations and cathode thickness.
Simulation-based degradation assessment of lithium-ion batteries in a hybrid electric vehicle
(2017)
Muli-scale thermos-electrochemical modelling of aging mechanisms in an LFP/graphite lithium-ion cell
(2017)
Passive hybridization of battery cell and photovoltaic cell: modeling and experimental validation
(2017)
Electrochemical impedance spectroscopy (EIS) is a widely-used diagnostic technique to characterize electrochemical processes. It is based on the dynamic analysis of two electrical observables, that is, current and voltage. Electrochemical cells with gaseous reactants or products (e.g., fuel cells, metal/air cells, electrolyzers) offer an additional observable, that is, the gas pressure. The dynamic coupling of current and/or voltage with gas pressure gives rise to a number of additional impedance definitions, for which we have introduced the term electrochemical pressure impedance spectroscopy (EPIS) [1,2]. EPIS shows a particular sensitivity towards transport processes of gas-phase or dissolved species, in particular, diffusion coefficients and transport pathway lengths. It is as such complementary to standard EIS, which is mainly sensitive towards electrochemical processes. This sensitivity can be exploited for model parameterization and validation. A general analysis of EPIS is presented, which shows the necessity of model-based interpretation of the complex EPIS shapes in the Nyquist plot (cf. Figure). We then present EPIS simulations for two different electrochemical cells: (1) a sodium/oxygen battery cell and (2) a hydrogen/air fuel cell. We use 1D or 2D electrochemical and transport models to simulate current excitation/pressure detection or pressure excitation/voltage detection. The results are compared to first EPIS experimental data available in literature [2,3].
Within this work, the benefits of using predictive control methods for the operation of Adsorption Cooling Machines (ACMs) are shown on a simulation study. Since the internal control decisions of series-manufactured ACMs often cannot be influenced, the work focuses on optimized scheduling of an ACM considering its internal functioning as well as forecasts for load and driving energy occurrence. For illustration, an assumed solar thermal climate system is introduced and a system model suitable for use within gradient-based optimization methods is developed. The results of a system simulation using a conventional scheme for ACM scheduling are compared to the results of a predictive, optimization-based scheduling approach for the same exemplary scenario of load and driving energy occurrence. The benefits of the latter approach are shown and future actions for application of these methods for system control are addressed.