Refine
Document Type
Conference Type
- Konferenzartikel (10)
Is part of the Bibliography
- yes (14)
Keywords
- 3D-Time-of-Flight Cameras (1)
- BLE (1)
- Bluetooth Low Energy (1)
- CoBot (1)
- Elektronische Medien (1)
- FSK Wake-Up (1)
- Human-Robot Collaboration (1)
- Robotics (1)
- Safe Speed and Separation Monitoring. (1)
- Sicherheit (1)
Institute
Open Access
- Closed Access (11)
- Closed (2)
- Open Access (1)
Time-of-Flight Cameras Enabling Collaborative Robots for Improved Safety in Medical Applications
(2020)
Human-robot collaboration is being used more and more in industry applications and is finding its way into medical applications. Industrial robots that are used for human-robot collaboration, cannot detect obstacles from a distance. This paper introduced the idea of using wireless technology to connect a Time-of-Flight camera to off-the-shelf industrial robots. This way, the robot can detect obstacles up to a distance of five meters. Connecting Time-of-Flight cameras to robots increases the safety in human-robot collaboration by detecting obstacles before a collision. After looking at the state of the art, the authors elaborated the different requirements for such a system. The Time-of-Flight camera from Heptagon is able to work in a range of up to five meters and can connect to the control unit of the robot via a wireless connection.
Sichere Detektion von Menschen in der Mensch-Roboter-Kollaboration mit Time-of-Flight Kameras
(2017)
Time-of-Flight Cameras Enabling Collaborative Robots for Improved Safety in Medical Applications
(2017)
Human-robot collaboration is being used more and more in industry applications and is finding its way into medical applications. Industrial robots that are used for human-robot collaboration, cannot detect obstacles from a distance. This paper introduced the idea of using wireless technology to connect a Time-of-Flight camera to off-the-shelf industrial robots. This way, the robot can detect obstacles up to a distance of five meters. Connecting Time-of-Flight cameras to robots increases the safety in human-robot collaboration by detecting obstacles before a collision. After looking at the state of the art, the authors elaborated the different requirements for such a system. The Time-of-Flight camera from Heptagon is able to work in a range of up to five meters and can connect to the control unit of the robot via a wireless connection.
In safety critical applications wireless technologies are not widely spread. This is mainly due to reliability and latency requirements. In this paper a new wireless architecture is presented which will allow for customizing the latency and reliability for every single participant within the network. The architecture allows for building up a network of inhomogeneous participants with different reliability and latency requirements. The used TDMA scheme with TDD as duplex method is acting gentle on resources. Therefore participants with different processing and energy resources are able to participate.
In medical applications wireless technologies are not widely spread. Today they are mainly used in non latency-critical applications where reliability can be guaranteed through retransmission protocols and error correction mechanisms. By using retransmission protocols within the disturbed shared wireless channel latency will increase. Therefore retransmission protocols are not sufficient for removing latency-critical wired connections within operating rooms such as foot switches. Todays research aims to improve reliability through the physical characteristics of the wireless channel by using diversity methods and more robust modulation. In this paper an Architecture for building up a reliable network is presented. The Architecture offers the possibility for devices with different reliability, latency and energy consumption requirements to participate. Furthermore reliability, latency and energy consumption are scalable for every single participant.
Human-robot collaboration plays a strong role in industrial production processes. The ISO/TS 15066 defines four different methods of collaboration between humans and robots. So far, there was no robotic system available that incorporates all four collaboration methods at once. Especially for the speed and separation monitoring, there was no sensor system available that can easily be attached directly to an off-the-shelf industrial robot arm and that is capable of detecting obstacles in distances from a few millimeters up to five meters. This paper presented first results of using a 3D time-of-flight camera directly on an industrial robot arm for obstacle detection in human-robot collaboration. We attached a Visionary-T camera from SICK to the flange of a KUKA LBR iiwa 7 R800. With Matlab, we evaluated the pictures and found that it works very well for detecting obstacles in a distance range starting from 0.5 m and up to 5 m.
We present a novel approach that utilizes BLE packets sent from generic BLE capable radios to synthesize an FSK-(like) addressable wake-up packet. A wake-up receiver system was developed from off-the-shelf components to detect these packets. It makes use of two differential signal paths separated by passive band-pass filters. After the rectification of each channel a differential amplifier compares the signals and the resulting wake-up signal is evaluated by an AS3933 wake-up receiver IC. Overall, the combination of these techniques contributes to a BLE compatible wake-up system which is more robust than traditional OOK wake-up systems. Thus, increasing wake-up range, while still maintaining a low energy budget. The proof-of-concept setup achieved a sensitivity of -47.8 dBm at a power consumption of 18.5 uW during passive listening. The system has a latency of 31.8 ms with a symbol rate of 1437 Baud.
This work compares the performance of Bluetooth Mesh implementations on real chipsets against the ideal implementation of the specification. Measurements are taken in experimental settings and reveal non-idealities in the underlying Bluetooth Low Energy specification in real chipsets and in the implementation of Mesh, which introduces an unruly transmission as well as reception behavior. These effects lead to an impact on transmission rate, reception rate, latency, as well as a more significant impact on the average power consumption.
A novel Bluetooth Low Energy advertising scan algorithm is presented for hybrid radios that are additionally capable to measure energy on Bluetooth channels, e.g. as they would need to be compliant with IEEE 802.15.4. Scanners applying this algorithm can achieve a low latency whilst consuming only a fraction of the power that existing mechanisms can achieve at a similar latency. Furthermore, the power consumption can scale with the incoming network traffic and in contrast to the existing mechanisms, scanners can operate without any frame loss given ideal network conditions. The algorithm does not require any changes to advertisers, hence, stays compatible with existing devices. Performance evaluated via simulation and experiments on real hardware shows a 37 percent lower power consumption compared to the best existing scan setting while even achieving a slightly lower latency which proves that this algorithm can be used to improve the quality of service of connection-less Bluetooth communication or reduce the connection establishment time of connection-oriented communication.
In der Forschungsgruppe um Prof. Dr. Thomas Wendt werden Themen in unterschiedlichsten Bereichen von Automatisierungstechnik über funktionale Sicherheit bis hin zur 3D-gedruckten Elektronik / Sensorik behandelt. Insgesamt arbeiten vier Doktoranden und vier Mitarbeiter an der Weiterentwicklung der verschiedenen Technologien, die in diesem Artikel zusammengefasst dargestellt sind.
The following paper presents the results of a feasibility study about Bluetooth Low Energy (BLE) based wireless sensors. The development of industrial wireless sensors leads to important demands for the wireless technologies like a low energy consumption and a resource saving simple protocol stack. Bluetooth Low Energy (BLE) is a rather new wireless standard which will completely fulfill these fundamental requirements. A self-designed BLE sensor system has been used to explore the common applicability of BLE for wireless sensor systems. The evaluation results of various analyses with the BLE sensor system are now presented in this paper.
During the last ten years the development of wireless sensing applications has become more and more attractive. A major reason for this trend is the large quantity of available wireless technologies. The progressing demand on wireless technologies is mainly driven through development from the industrial wireless sensors market. Especially requirements like low energy consumption, a resource saving simple protocol stack and short timing delays between different states of the wireless transceivers are very important for wireless sensors. Bluetooth Low Energy (BLE) is a rather new wireless standard in addition to the traditional Bluetooth standard (Basis rate and enhanced data rate, BR/EDR) [1]. The BLE will completely fulfill these fundamental requirements. First BLE transceiver chips and modules are available and have been tested and implemented in products. In this paper the performance analysis results of a BLE sensor system which is based on the TI transceiver CC2540F [5] will be presented. The results can be taken for further important investigations like lifetime calculations or BLE simulation models.