Refine
Year of publication
Document Type
- Article (reviewed) (285) (remove)
Is part of the Bibliography
- yes (285) (remove)
Keywords
- Dünnschichtchromatographie (17)
- Adsorption (10)
- Metallorganisches Netzwerk (9)
- Ermüdung (8)
- Plastizität (8)
- Simulation (6)
- 3D printing (5)
- Energieversorgung (5)
- HPTLC (5)
- Mikrostruktur (5)
Institute
- Fakultät Maschinenbau und Verfahrenstechnik (M+V) (285) (remove)
Open Access
- Open Access (114)
- Closed Access (104)
- Closed (30)
- Gold (29)
- Hybrid (14)
- Diamond (10)
Wood juice, a liquid produced during wood processing, is a harmful waste that requires utilization. To achieve a circular economy, biowastes should be recycled, reducing fossil carbon usage. Therefore, the objective of this work was to examine the potential of wood juice as a feedstock for bioplastic synthesis by Bacillus sp. G8_19. Polyhydroxyalkanoate (PHA) syntheses using wood juice from Douglas fir trees and that from a mixture of spruce/fir trees were compared. It was found that the PHA content was higher after using wood juice from spruce/fir trees than that from Douglas fir trees (18.0% vs 6.1% of cell dry mass). Gas chromatography analysis showed that, with both wood juices, Bacillus sp. G8_19 accumulated poly(3-hydroxybutyrate-co-3-hydroxyvalerate). The content of 3-hydroxyvalerate (3HV) monomers was higher when spruce/fir wood juice was used (10.7% vs 1.9%). The C/N ratio did not have a statistically significant effect on the copolymer content in biomass, but it did significantly influence the 3HV content. The proposed concept may serve as an approach to wood waste valorization via production of biodegradable materials.
Wirtschaftlichkeitsbetrachtung eines smarten Energiekonzepts für ein Bestandsquartier in Karlsruhe
(2023)
Die Transformation der Energieversorgung in Bestandsgebäuden ist für die Erreichung der Klimaziele im Gebäudesektor entscheidend. In einem modellhaften Quartiersprojekt in Karlsruhe-Durlach wird ein ‚smartes Energiekonzept‘, bestehend aus Wärmepumpen, Blockheizkraftwerk und PV-Anlagen mit lokalem Strom- und Wärmenetz umgesetzt und messtechnisch begleitet. Ziel ist dabei eine CO2-effiziente und wirtschaftliche Bereitstellung von Wärme und Strom.
In dem Artikel wird eine Wirtschaftlichkeitsbetrachtung für das Wärme- und Stromcontracting auf Basis der realen Investitionskosten sowie der gemessenen und berechneten Energieflüsse durchgeführt. Die Wärmegestehungskosten hängen neben den Investitionskosten von den energiewirtschaftlichen Rahmenbedingungen ab. Mit ansteigender CO2-Steuer werden mittelfristig Wärmegestehungskosten erreicht, die unter denen konventioneller Energiesysteme liegen. Dadurch bietet das integrierte Energiekonzept ein breites Anwendungspotenzial für städtische Bestandsquartiere außerhalb von Fernwärme-Gebieten.
Shapes and structures of vortex breakdown phenomena in rotating fluids are visualized. We investigate the flow in a cylindrical container and in a cone between two spherical surfaces. The primary swirling flow is induced by the rotating upper disk in the cylindrical case and by the lower boundary in the spherical case. The upper surface can be fixed with a no slip condition or can be a stress-free surface. Depending on these boundary conditions and on the Reynolds number novel structures of recirculation zones are realized. Experiments are done to visualize the topological structure of the flow and to determine their existence range as function of the geometry and rotation rate. A comparison between the experimental and theoretical approach shows a good agreement in respect to the topological structures of the flows.
Non-contact anterior cruciate ligament injuries typically occur during cutting maneuvers and are associated with high peak knee abduction moments (KAM) within early stance. To screen athletes for injury risk or quantify the efficacy of prevention programs, it may be necessary to design tasks that mimic game situations. Thus, this study compared KAMs and ranking consistency of female handball players in three sport-specific fake-and-cut tasks of increasing complexity. The biomechanics of female handball players (n = 51, mean ± SD: 66.9 ± 7.8 kg, 1.74 ± 0.06 m, 19.2 ± 3.4 years) were recorded with a 3D motion capture system and force plates during three standardized fake-and-cut tasks. Task 1 was designed as a simple pre-planned cut, task 2 included catching a ball before a pre-planned cut in front of a static defender, and task 3 was designed as an unanticipated cut with three dynamic defenders involved. Inverse dynamics were used to calculate peak KAM within the first 100 ms of stance. KAM was decomposed into the frontal plane knee joint moment arm and resultant ground reaction force. RANOVAs (α ≤ 0.05) were used to reveal differences in the KAM magnitudes, moment arm, and resultant ground reaction force for the three tasks. Spearman's rank correlations were calculated to test the ranking consistency of the athletes' KAMs. There was a significant task main effect on KAM (p = 0.02; ηp2 = 0.13). The KAM in the two complex tasks was significantly higher (task 2: 1.73 Nm/kg; task 3: 1.64 Nm/kg) than the KAM in the simplest task (task 1: 1.52 Nm/kg). The ranking of the peak KAM was consistent regardless of the task complexity. Comparing tasks 1 and 2, an increase in KAM resulted from an increased frontal plane moment arm. Comparing tasks 1 and 3, higher KAM in task 3 resulted from an interplay between both moment arm and the resultant ground reaction force. In contrast to previous studies, unanticipated cutting maneuvers did not produce the highest KAMs. These findings indicate that the players have developed an automated sport-specific cutting technique that is utilized in both pre-planned and unanticipated fake-and-cut tasks.
A 2D-separation of 16 polyaromatic hydrocarbons (PAHs) according to the Environmental Protecting Agency (EPA) standard was introduced. Separation took place on a TLC RP-18 plate (Merck, 1.05559). In the first direction, the plate was developed twice using n-pentane at −20°C as the mobile phase. The mixture acetonitrile-methanol-acetone-water (12:8:3:3, v/v) was used for developing the plate in the second direction. Both developments were carried out over a distance of 43 mm. Further on in this publication, a specific and very sensitive indication method for benzo[a]pyrene and perylene was presented. The method can detect these hazardous compounds even in complicated PAH mixtures. These compounds can be quantified by a simple chemiluminescent reaction with a limit of detection (LOD) of 48 pg per band for perylene and 95 pg per band for benzo[a]pyrene. Although these compounds were separated from all other PAHs in the standard, a separation of both compounds was not possible from one another. The method is suitable for tracing benzo[a]pyrene and/or perylene. The proposed chemiluminescence screening test on PAHs is extremely sensitive but may indicate a false positive result for benzo[a]pyrene.
We present a two-dimensional (2D) planar chromatographic separation method for phytoestrogenic active compounds on RP-18 W (Merck, 1.14296) phase. It could be shown that an ethanolic extract of liquorice (Glycyrrhiza glabra) roots contains four phytoestrogenic active compounds. As solvent, in the first direction, the mix of hexane, ethyl acetate, and acetone (45:15:10, v/v) was used, and, in the second direction, that of acetone and water (15:10, v/v) was used. After separation, a modified yeast estrogen screen (YES) test was applied, using the yeast strain Saccharomyces cerevisiae BJ3505. The test strain (according to McDonnell) contains the estrogen receptor. Its activation by estrogen active compounds is measured by inducing the reporter gene lacZ which encodes the enzyme β-galactosidase. This enzyme activity is determined on plate by using the fluorescent substrate MUG (4-methylumbelliferyl-β-d-galactopyranoside). The enzyme can also hydrolyse X-β-Gal (5-bromo-4-chloro-3-indoxyl-β-d-galactopyranosid) into β-galactose and 5-bromo-4-chloro-3-indoxyl. The indoxyl compound is oxidized by oxygen forming the deep-blue dye 5,5β-dibromo-4,4β-dichloro-indigo which allows to detect phytoestrogenic activity more specific in the presence of native fluorescing compounds.
We present a two-dimensional (2D) planar chromatographic separation of estrogenic active compounds on RP-18 W (Merck, 1.14296) phase. A mixture of 8 substances was separated using a solvent mix consisting of hexane, ethyl acetate, acetone (55:15:10, v/v) in the first direction and of acetone and water (15:10, v/v) in the second direction. Separation was performed on an RP-18 W plate over a distance of 70 mm. This 2D-separation method can be used to quantify 17α-ethinylestradiol (EE2) in an effect-directed analysis, using the yeast strain Saccharomyces cerevisiae BJ3505. The test strain (according to McDonnell) contains the estrogen receptor. Its activation by estrogen active compounds is measured by inducing the reporter gene lacZ which encodes the enzyme β-galactosidase. This enzyme activity is determined on plate by using the fluorescent substrate MUG (4-methylumbelliferyl-β-d-galactopyranoside).
The state-of-the-art electrochemical impedance spectroscopy (EIS) calculations have not yet started from fully multi-dimensional modeling. For a polymer electrolyte membrane fuel cell (PEMFC) with long flow channel, the impedance plot shows a multi-arc characteristic and some impedance arcs could merge. By using a step excitation/Fourier transform algorithm, an EIS simulation is implemented for the first time based on the full 2D PEMFC model presented in the first part of this work. All the dominant transient behaviors are able to be captured. A novel methodology called ‘configuration of system dynamics’, which is suitable for any electrochemical system, is then developed to resolve the physical meaning of the impedance spectra. In addition to the high-frequency arc due to charge transfer, the Nyquist plots contain additional medium/low-frequency arcs due to mass transfer in the diffusion layers and along the channel, as well as a low-frequency arc resulting from water transport in the membrane. In some case, the impedance spectra appear partly inductive due to water transport, which demonstrates the complexity of the water management of PEMFCs and the necessity of physics-based calculations.
A two-dimensional single-phase model is developed for the steady-state and transient analysis of polymer electrolyte membrane fuel cells (PEMFC). Based on diluted and concentrated solution theories, viscous flow is introduced into a phenomenological multi-component modeling framework in the membrane. Characteristic variables related to the water uptake are discussed. A Butler–Volmer formulation of the current-overpotential relationship is developed based on an elementary mechanism of electrochemical oxygen reduction. Validated by using published V–I experiments, the model is then used to analyze the effects of operating conditions on current output and water management, especially net water transport coefficient along the channel. For a power PEMFC, the long-channel configuration is helpful for internal humidification and anode water removal, operating in counterflow mode with proper gas flow rate and humidity. In time domain, a typical transient process with closed anode is also investigated.
One of the practical bottlenecks associated with commercialization of lithium-air cells is the choice of an appropriate electrolyte that provides the required combination of cell performance, cyclability and safety. With the help of a two-dimensional multiphysics model, we attempt to narrow down the electrolyte choice by providing insights into the effect of the transport properties of electrolyte, electrode saturation (flooded versus gas diffusion), and electrode thickness on a single discharge performance of a lithium-air button cell cathode for five different electrolytes including water, ionic liquid, carbonate, ether, and sulfoxide. The 2D distribution of local current density and concentrations of electrochemically active species (O2 and Li+) in the cathode is also discussed w.r.t electrode saturation. Furthermore, the efficacy of species transport in the cathode is quantified by introducing two parameters, firstly, a transport efficiency that gives local insight into the distribution of mass transfer losses, and secondly, an active electrode volume that gives global insight into the cathode volume utilization at different current densities. A detailed discussion is presented toward understanding the design-induced performance limitations in a Li-air button cell prototype.