Refine
Year of publication
- 2019 (7) (remove)
Document Type
- Conference Proceeding (7) (remove)
Conference Type
- Konferenzartikel (6)
- Konferenz-Abstract (1)
Language
- English (7)
Has Fulltext
- no (7)
Is part of the Bibliography
- yes (7) (remove)
Keywords
Institute
Open Access
- Closed Access (4)
- Open Access (3)
The ability to change aerodynamic parameters of airfoils during flying can potentially save energy as well as reducing the noise made by the unmanned aerial vehicles (UAV) because of sharp edges of the airfoil and its rudders. In this paper, an approach for the design of an adaptive wing using a multi-material 3D printer is shown. In multi-material 3D printing, up to six different materials can be combined in one component. Thus, the user can determine the mixture and the spatial arrangement of this “digital material” in advance in the pre-processing software. First, the theoretical benefits of adaptive wings are shown, and already existing adaptive wings and concepts are explicated within a literature review. Then the additive manufacturing process using photopolymer jetting and its capabilities to print multiple materials in one part are demonstrated. Within the scope of a case study, an adaptive wing is developed and the necessary steps for the product development and their implementation in CAD are presented. This contribution covers the requirements for different components and sections of an adaptive wing designed for additive manufacturing using multiple materials as well as the single steps of development with its different approaches until the final design of the adaptive wing. The developed wing section is simulated, and qualitative tests in a wind tunnel are carried out with the wing segment. Finally, the additively manufactured wing segment is evaluated under technical and economic aspects.
The fast and cost-effective manufacturing of tools for thermoforming is an essential requirement to shorten the development time of products. Thus, additive processes are used increasingly in tooling for thermoforming of plastic sheets. However, a disadvantage of many additive methods is that they are highly cost-intensive, since complex systems based on laser technology and expensive metal powders are needed. Therefore, this paper examines how to work with favorable additive methods, e.g. Binder Jetting, to manufacture tools, which provide sufficient strength for thermoforming. The use of comparatively low-priced inkjet technology for the layer construction and a polymer plaster as material can be expected to result in significant cost reductions. Based on a case study using a cowling (engine bonnet) for an Unmanned Aerial Vehicle (UAV), the development of a complex tool for thermoforming is demonstrated. The object in this study is to produce a tool for a complex-shaped component in small numbers and high quality in a short time and at reasonable costs. Within the tooling process, integrated vacuum channels are implemented in additive tooling without the need for additional post-processing (for example, drilling). In addition, special technical challenges, such as the demolding of undercuts or the parting of the tool are explained. All process steps from tool design to the use of the additively manufactured tool are analyzed. Based on the manufacturing of a small series of cowlings for a UAV made of plastic sheets (ABS), it is shown, that the Binder Jetting offers sufficient mechanical and thermal strength for additive tooling. In addition, an economic evaluation of the tool manufacturing and a detailed consideration of the required manufacturing times for the different process steps are carried out. Finally, a comparison is made with conventional and alternative additive methods of tooling.
Direct Digital Manufacturing of Architectural Models using Binder Jetting and Polyjet Modeling
(2019)
Today, architectural models are an important tool for illustrating drawn-on plansor computer-generated virtual models and making them understandable. Inaddition to the conventional methods for the manufacturing of physical models, awide range of processes for Direct Digital Manufacturing (DDM) has spreadrapidly in recent years. In order to facilitate the application of these new methodsfor architects, this contribution examines which technical and economic resultsare possible using 3D printed architectural models. Within a case study, it will beshown on the basis of a multi-storey detached house, which kind of datapreparation is necessary. The DDM of architectural models will be demonstratedusing two widespread techniques and the resulting costs will be compared.
Besides of conventional CAD systems, new, cloud-based CAD systems have also been available for some years. These CAD systems designed according to the principle of software as a service (SaaS) differ in some important features from the conventional CAD systems. Thus, these CAD systems are operated via a browser and it is not necessary to install the software on a computer. The CAD-data is stored in the cloud and not on a local computer or central server. This new approach should also facilitate the sharing and management of data. Finally, many of these new CAD systems are available as freeware for education purposes, so the universities can save license costs. This contribution examines newly developed, cloud-based CAD systems. In the context of a case study, the application of these new CAD systems are investigated in the training of engineers in design education. Thus, the students compare a conventional and a cloud-based CAD system as part of an exercise of designing and 3D modelling of a pinion shaft. Subsequently, the students manufacture a drawing with different views of the pinion shaft. This assessment evaluates different criteria such as user-friendliness, tutorial support and installation effort.
The development of new processes and materials for additive manufacturing is currently progressing rapidly. In order to use the advantages of additive manufacturing, however, product development and design must also be adapted to these new processes. Therefore it is suitable to use structural optimization. To achieve the best results in lightweight design, it is important to have an approach that reduces the volume in the unloaded regions and considers the restrictions and characteristics of the additive manufacturing process. In this contribution, a case study using a humanoid robot is presented. Thus, the pelvis module of a humanoid robot is optimized regarding its weight and stiffness. Furthermore, an integrated design is implemented in order to reduce the number of parts and the screw connections. The manufacturing uses a new aluminum-based material that has been specially developed for use in additive manufacturing and lightweight construction. For the additive manufacturing by means of the Selective Laser Melting (SLM) process, different restrictions and the assembly concepts of the humanoid robot have to be taken into account. These restrictions have to be considered in the setting of the individual parameters and target functions of the structural optimization. As a result, a framework is presented that shows the steps of the redesign and the optimization of the pelvis module. In order to achieve high accuracy with the product, the redesign of the pelvis module is demonstrated with regard to mechanical and thermal postprocessing. Finally, the redesigned part and the different assembly concepts are compared to analyze the economic and technical effects of the optimization.
The additive manufacturing processes have developed significantly in recent years. Currently, new generative processes are coming onto the market. Likewise, the number of available materials that can be processed using additive processes is steadily increasing. Therefore, an important task is to integrate these new processes and materials into the university education of engineers. Due to the rapid change and the constant development in the field of additive manufacturing, a pure transfer of knowledge is not expedient, because this obsolete very quickly. Rather, the students should be enabled to use their skills in such a way that they can always handle new technologies and materials independently and meaningfully.
In this paper, therefore, a new course is developed in which the students largely independently work with additive manufacturing processes. For this purpose, teams of four to five students from different technical programs are formed. The teams have the task of developing and manufacturing a product using additive processes. The goal is to create a powerful product by taking into account the optimization of costs and use of resources.
As an example, the development and additive manufacturing of an ornithopter (aircraft that flies by flapping its wings) will be presented in this contribution. The students have to analyze and optimize the mechanics and aerodynamics of the aircraft. In addition, the rules for production-oriented design must be determined and applied. Further more, they should assess the costs and material consumption during development and production.
This contribution shows how the students have achieved the different learning outcomes. In addition, it becomes clear how the students independently acquired and applied their knowledge in development, design and additive manufacturing. Also, it will be demonstrated how much time the students spent on learning the different technologies.
The visualization of heart rhythm disturbance and atrial fibrillation therapy allow the optimization of new cardiac catheter ablations. With the simulation software CST (Computer Simulation Technology, Darmstadt) electromagnetic and thermal simulations can be carried out to analyze and optimize different heart rhythm disturbance and cardiac catheters for pulmonary vein isolation. Another form of visualization is provided by haptic, three-dimensional print models. These models can be produced using an additive manufacturing method, such as a 3D printer. The aim of the study was to produce a 3D print of the Offenburg heart rhythm model with a representation of an atrial fibrillation ablation procedure to improve the visualization of simulation of cardiac catheter ablation.
The basis of 3D printing was the Offenburg heart rhythm model and the associated simulation of cryoablation of the pulmonary vein. The thermal simulation shows the pulmonary vein isolation of the left inferior pulmonary vein with the cryoballoon catheter Arctic Front AdvanceTM from Medtronic. After running through the simulation, the thermal propagation during the procedure was shown in the form of different colors. The three-dimensional print models were constructed on the base of the described simulation in a CAD program. Four different 3D printers are available for this purpose in a rapid prototyping laboratory at the University of Applied Science Offenburg. Two different printing processes were used: 1. a binder jetting printer with polymer gypsum and 2. a multi-material printer with photopolymer. A final print model with additional representation of the esophagus and internal esophagus catheter was also prepared for printing.
With the help of the thermal simulation results and the subsequent evaluation, it was possible to make a conclusion about the propagation of the cold emanating from the catheter in the myocardium and the surrounding tissue. It could be measured that already 3 mm from the balloon surface into the myocardium the temperature drops to 25 °C. The simulation model was printed using two 3D printing methods. Both methods as well as the different printing materials offer different advantages and disadvantages. While the first model made of polymer gypsum can be produced quickly and cheaply, the second model made of photopolymer takes five times longer and was twice as expensive. On the other hand, the second model offers significantly better properties and was more durable overall. All relevant parts, especially the balloon catheter and the conduction, are realistically represented. Only the thermal propagation in the form of different colors is not shown on this model.
Three-dimensional heart rhythm models as well as virtual simulations allow a very good visualization of complex cardiac rhythm therapy and atrial fibrillation treatment methods. The printed models can be used for optimization and demonstration of cryoballoon catheter ablation in patients with atrial fibrillation.