Refine
Year of publication
- 1995 (2) (remove)
Document Type
Conference Type
- Konferenzartikel (1)
Has Fulltext
- no (2)
Is part of the Bibliography
- yes (2)
Keywords
- Energieübertragung (1)
- Lichtwellenleiter (1)
- Messaufnehmer (1)
- Messsystem (1)
- optische Signalverarbeitung (1)
- optische Übertragungstechnik (1)
Institute
- Fakultät Elektrotechnik und Informationstechnik (E+I) (bis 03/2019) (2) (remove)
Open Access
- Closed (2)
The prototype of an optical gyro encoder (OGE) has been successfully tested on the NTT telescope in September '93. The OGE consists of a ring laser gyro and a fiber optic gyro with their input axis parallel. The gyro outptu signals are compensated for earth rotation and misalignment and are subsequently integrated to get the angles. An adaptive digital control loop locks the fiber optic gyro to the laser gyro data. Thus the combined output has the precision of the laser gyro and the low noise of the fiber optic gyro. Specifically, the bias stability is better than 2 X 10-3 deg/h, the scale factor accuracy better than 1 ppm, the random walk coefficient better than 5 X 10-4 deg/(root)h and the resolution better than 3 X 10-4 arcsec. The OGE has been mounted in the altitude and in the azimuthy axis of the telescope. The data were compared with the telescope disk encoder data. The test data show that the pointing accuracy is about 1 arcsec and the tracking accuracy 0.1 arcsec over a time of 30 seconds. This accuracy is sufficient for the very large telescope, for instance.
Das in diesem Beitrag beschriebene Meßsystem besteht aus einem Steuerteil zur Eingabe der Befehle, einem digitalen Display zur Anzeige der Meßwerte und einer davon stationierten Sonde, welche die Meßwerte aufnimmt und digitalisiert. Beide Teile sind über zwei Lichtwellenleiter miteinander verbunden. Die zur Versorgung nötige Energie und die Steuersignale zur Meßsonde überträgt einer der beiden Lichtwellenleiter. Eine Laserdiode in der Steuereinheit liefert dazu eine optische Ausgangsleistung, die in die Faser eingekoppelt wird. In der Meßsonde wandelt ein 'Power-Converter' die optische Leistung wieder in elektrische Energie zurück. Über den zweiten Lichtwellenleiter sendet die Meßsonde die aufgenommenen Daten an das Steuergerät. In der Meßsonde sitzt ein Mikrorechner, der die Signale erfaßt, digitalisiert und an die Steuereinheit sendet. Dort ermittelt der andere Mikrorechner daraus die Meßgröße und zeigt sie auf einem LC-Display an.