Refine
Year of publication
Document Type
- Article (reviewed) (30) (remove)
Has Fulltext
- no (30) (remove)
Is part of the Bibliography
- yes (30)
Keywords
- Crack opening stress (2)
- Diode-array detection (2)
- Electrical Engineering (2)
- Electronic Engineering (2)
- Kubelka-Munk theory (2)
- Plasticity-induced crack closure (2)
- Antioxidative peptides (1)
- Applied Electric Field (1)
- BIPV (1)
- Baustoff (1)
Institute
- Fakultät Maschinenbau und Verfahrenstechnik (M+V) (30) (remove)
Open Access
- Closed (30) (remove)
BACKGROUND
Various neutral and alkaline peptidases are commercially available for use in protein hydrolysis under neutral to alkaline conditions. However, the hydrolysis of proteins under acidic conditions by applying fungal aspartic peptidases (FAPs) has not been investigated in depth so far. The aim of this study, thus, was to purify a FAP from the commercial enzyme preparation, ROHALASE® BXL, determine its biochemical characteristics, and investigate its application for the hydrolysis of food and animal feed proteins under acidic conditions.
RESULTS
A Trichoderma reesei derived FAP, with an apparent molecular mass of 45.8 kDa (sodium dodecyl sulfate–polyacrylamide gel electrophoresis; SDS-PAGE) was purified 13.8-fold with a yield of 37% from ROHALASE® BXL. The FAP was identified as an aspartate protease (UniProt ID: G0R8T0) by inhibition and nano-LC-ESI-MS/MS studies. The FAP showed the highest activity at 50°C and pH 4.0. Monovalent cations, organic solvents, and reducing agents were tolerated well by the FAP. The FAP underwent an apparent competitive product inhibition by soy protein hydrolysate and whey protein hydrolysate with apparent Ki-values of 1.75 and 30.2 mg*mL−1, respectively. The FAP showed promising results in food (soy protein isolate and whey protein isolate) and animal feed protein hydrolyses. For the latter, an increase in the soluble protein content of 109% was noted after 30 min.
CONCLUSION
Our results demonstrate the applicability of fungal aspartic endopeptidases in the food and animal feed industry. Efficient protein hydrolysis of industrially relevant substrates such as acidic whey or animal feed proteins could be conducted by applying fungal aspartic peptidases. © 2022 Society of Chemical Industry.
Linear acceleration is a key performance determinant and major training component of many sports. Although extensive research about lower limb kinetics and kinematics is available, consistent definitions of distinctive key body positions, the underlying mechanisms and their related movement strategies are lacking. The aim of this ‘Method and Theoretical Perspective’ article is to introduce a conceptual framework which classifies the sagittal plane ‘shin roll’ motion during accelerated sprinting. By emphasising the importance of the shin segment’s orientation in space, four distinctive key positions are presented (‘shin block’, ‘touchdown’, ‘heel lock’ and ‘propulsion pose’), which are linked by a progressive ‘shin roll’ motion during swing-stance transition. The shin’s downward tilt is driven by three different movement strategies (‘shin alignment’, ‘horizontal ankle rocker’ and ‘shin drop’). The tilt’s optimal amount and timing will contribute to a mechanically efficient acceleration via timely staggered proximal-to-distal power output. Empirical data obtained from athletes of different performance levels and sporting backgrounds are required to verify the feasibility of this concept. The framework presented here should facilitate future biomechanical analyses and may enable coaches and practitioners to develop specific training programs and feedback strategies to provide athletes with a more efficient acceleration technique.
Bud type carbon nanohorns (CNHs) are composed of carbon and have a closed conical tip at one end protruding from an aggregate structure. By employing a simple oxidation process in CO2 atmosphere, it is possible to open the CNH tips which increases their specific surface area by four fold. These tip opened CNHs combine the microporous nature of activated carbons and the crystalline mesoporous character of carbon nanotubes. The results for the high pressure CO2 gas adsorption of tip opened CNHs are reported herein for the first time and are found to be superior to traditional CO2 adsorbents like zeolites. The modified CNHs are also found to be promising materials for lithium ion batteries and the performance is found to be on a par with carbon nanotubes and carbon nanofibers.
In this paper, the J-integral is derived for temperature-dependent elastic–plastic materials described by incremental plasticity. It is implemented using the equivalent domain integral method for assessment of three-dimensional cracks based on results of finite-element calculations. The J-integral considers contributions from inhomogeneous temperature fields and temperature-dependent elastic and plastic material properties as well as from gradients in the plastic strains and the hardening variables. Different energy densities are considered, the Helmholtz free energy and the stress-working density, providing a physical meaning of the J-integral as a fracture criteria for crack growth. Results obtained for a plate with two different crack configurations each loaded by a cool-down thermal shock show domain-independence of the incremental J-integral for different energy densities even for high temperature gradients and significant temperature-dependence of the yield stress and the hardening exponent in the presence of large scale yielding. Hence, the derived J-integral is an appropriate parameter for the assessment of cracks in thermomechanically loaded components.
Background
To assess the in-field walking mechanics during downhill hiking of patients with total knee arthroplasty five to 14 months after surgery and an age-matched healthy control group and relate them to the knee flexor and extensor muscle strength.
Methods
Participants walked on a predetermined hiking trail at a self-selected, comfortable pace wearing an inertial sensor system for recording the whole-body 3D kinematics. Sagittal plane hip, knee, and ankle joint angles were evaluated over the gait cycle at level walking and two different negative slopes. The concentric and eccentric lower extremity muscle strength of the knee flexors and extensors isokinetically at 50 and 120°/s were measured.
Findings
Less knee flexion angles during stance have been measured in patients in the operated limb compared to healthy controls in all conditions (level walking, moderate downhill, steep downhill). The differences increased with steepness. Muscle strength was lower in patients for both muscle groups and all measured conditions. The functional hamstrings to quadriceps ratio at 120°/sec correlated with knee angle during level and downhill walking at the moderate slope in patients, showing higher ratios with lower peak knee flexion angles.
Interpretation
The study shows that even if rehabilitation has been completed successfully and complication-free, five to 14 months after surgery, the muscular condition was still insufficient to display a normal gait pattern during downhill hiking. The muscle balance between quadriceps and hamstring muscles seems related to the persistence of a stiff knee gait pattern after knee arthroplasty. LoE: III.
Energy efficiency and hygrothermal performance of hemp clay walls for Moroccan residential buildings
(2023)
Hemp-based building envelopes have gained significant popularity in developed countries, and now the trend of constructing houses with hemp-clay blocks is spreading to developing countries like Morocco. Investigating the hygrothermal behavior of such structures under actual climate conditions is essential for advancing and promoting this sustainable practice. This paper presents an in-depth experimental characterization of a commercial hemp-clay brick that has been exposed to the outdoor environment for four years, in addition to field measurements on a building scale demonstration prototype. Additionally, the study simulates 17 representative cities to assess the hygrothermal performance and energy-saving potential in each of Morocco's six existing climate zones, using the EnergyPlus engine. The experimental campaign's findings demonstrate excellent indoor air temperature and relative humidity regulation within the hemp-clay wall building, leading to satisfactory levels of thermal comfort within hemp-clay wall buildings. This is attributed to the material's good thermal conductivity and excellent moisture buffering capacity (found to be 0.31 W/mK and 2.25 g/m2%RH), respectively). The energy simulation findings also point to significant energy savings, with cooling and heating energy reductions ranging from 27.7% to 47.5% and 33.7% to 79.8%, respectively, as compared to traditional Moroccan buildings.
This review provides an overview on the production and analysis techniques of antioxidative peptides from food proteins. Regarding the production of antioxidative peptides, interlinked factors must be considered. Depending on the protein substrate, different peptidases or peptidase systems containing multiple enzymes as well as a specific production process must be chosen. The antioxidative peptides might be produced in a batch process including multiple pre- and post-treatments, besides the hydrolyses with peptidases itself. As an alternative, the potential of continuous production systems is discussed in this review. Furthermore, robust analyses tools are needed to gain control of the process and final product properties. With no standardized methodology available for antioxidative peptide evaluation, pros and cons of various strategies for peptide separation and antioxidative measurement are discussed in this review. Therefore, this review provides a roadmap for antioxidative peptide generation from various sources for research and development as well as for potential industrial use.
Human interaction frequently includes decision-making processes during which interactants call on verbal and non-verbal resources to manage the flow of interaction. In 2017, Stevanovic et al. carried out pioneering work, analyzing the unfolding of moment-by-moment dynamics by investigating the behavioral matching during search and decision-making phases. By studying the similarities in the participant's body sway during a conversation task in Finnish, the authors showed higher behavioral matching during decision phases than during search phases. The purpose of this research was to investigate the whole-body sway and its coordination during joint search and decision-making phases as a replication of the study by Stevanovic et al. (2017) but based on a German population. Overall, 12 dyads participated in this study and were asked to decide on 8 adjectives, starting with a pre-defined letter, to describe a fictional character. During this joint-decision task (duration: 206.46 ± 116.08 s), body sway of both interactants was measured using a 3D motion capture system and center of mass (COM) accelerations were computed. Matching of body sway was calculated using a windowed cross correlation (WCC) of the COM accelerations. A total of 101 search and 101 decision phases were identified for the 12 dyads. Significant higher COM accelerations (5.4*10−3 vs. 3.7*10−3 mm/s2, p < 0.001) and WCC coefficients (0.47 vs. 0.45, p = 0.043) were found during decision-making phases than during search phases. The results suggest that body sway is one of the resources humans use to communicate the arrival at a joint decision. These findings contribute to a better understanding of interpersonal coordination from a human movement science perspective.
Given the looming threats of climate change and the rapid worldwide urbanization, it is a necessity to prioritize the transition towards a carbon-free built environment. This research study provides a holistic digital methodology for parametric design of urban residential buildings with regard to the Mediterranean semi-arid climate zone of Morocco in the early design phase. The morphological parameters of the urban residential buildings, namely the buildings’ typology, the distance between buildings, the urban grid’s orientation, and the window-towall ratio, are evaluated in order to identify the key combinations of passive and active solar design strategies that determine the high energy performing configurations, based on the introduced Energy Performance Index (EPI), which is the ratio between solar BIPV production to maximum available installed BIPV capacity and the normalized thermal energy needs. Through an automated processing of 2187 iterations via Grasshopper, we simulate daylight autonomy, indoor thermal comfort and solar rooftop photovoltaic and building integrated photovoltaic (BIPV) energy potential. Then, we analyze the conflicting objectives of energy efficiency measures, active solar design strategies, and indoor visual comfort in the decision-making process that supports our goal of getting closer to net zero urban residential buildings. The digital workflow showed interesting trends in reaching a balanced equilibrium between performance metrics influenced by the contrasting impact of solar exposure on indoor daylight autonomy and thermal energy demand. Furthermore, the study’s findings indicate that it is possible to achieve an annual load match exceeding 66,56 % while simultaneously ensuring an acceptable visual indoor comfort (sDA higher than 0.4). The findings also highlight the important role of the BIPV system in shifting towards the net zero energy goal, by contributing up to 30 % of the overall solar energy output and covering up to 20 % of the yearly self-consumption. Moreover, the energy balance evaluation on an hourly basis indicates that BIPV system notably enhances the daily load cover factor by up to 5.5 %, particularly in the case of slab SN typology, throughout the different seasons. Graphical representations of the yearly, monthly and hourly load matches and the hourly energy balance of the best performing configurations provide a thorough understanding of the potential evolution of the urban energy system over time as a result of the gradual integration of active solar electricity production.
Wirtschaftlichkeitsbetrachtung eines smarten Energiekonzepts für ein Bestandsquartier in Karlsruhe
(2023)
Die Transformation der Energieversorgung in Bestandsgebäuden ist für die Erreichung der Klimaziele im Gebäudesektor entscheidend. In einem modellhaften Quartiersprojekt in Karlsruhe-Durlach wird ein ‚smartes Energiekonzept‘, bestehend aus Wärmepumpen, Blockheizkraftwerk und PV-Anlagen mit lokalem Strom- und Wärmenetz umgesetzt und messtechnisch begleitet. Ziel ist dabei eine CO2-effiziente und wirtschaftliche Bereitstellung von Wärme und Strom.
In dem Artikel wird eine Wirtschaftlichkeitsbetrachtung für das Wärme- und Stromcontracting auf Basis der realen Investitionskosten sowie der gemessenen und berechneten Energieflüsse durchgeführt. Die Wärmegestehungskosten hängen neben den Investitionskosten von den energiewirtschaftlichen Rahmenbedingungen ab. Mit ansteigender CO2-Steuer werden mittelfristig Wärmegestehungskosten erreicht, die unter denen konventioneller Energiesysteme liegen. Dadurch bietet das integrierte Energiekonzept ein breites Anwendungspotenzial für städtische Bestandsquartiere außerhalb von Fernwärme-Gebieten.