Refine
Year of publication
Document Type
Conference Type
- Konferenzartikel (20)
- Sonstiges (1)
Has Fulltext
- no (25) (remove)
Is part of the Bibliography
- yes (25)
Keywords
- Funktechnik (3)
- Sicherheit (3)
- Applikation (2)
- Datensicherung (2)
- Kommunikation (2)
- energy harvesting (2)
- 3D printing (1)
- 3D-Druck von leitfähigen Materialien (1)
- 3D-Time-of-Flight Cameras (1)
- BLE (1)
Institute
- WLRI - Work-Life Robotics Institute (25) (remove)
Open Access
- Closed Access (20)
- Closed (3)
- Open Access (2)
- Bronze (1)
This work compares the performance of Bluetooth Mesh implementations on real chipsets against the ideal implementation of the specification. Measurements are taken in experimental settings and reveal non-idealities in the underlying Bluetooth Low Energy specification in real chipsets and in the implementation of Mesh, which introduces an unruly transmission as well as reception behavior. These effects lead to an impact on transmission rate, reception rate, latency, as well as a more significant impact on the average power consumption.
A novel Bluetooth Low Energy advertising scan algorithm is presented for hybrid radios that are additionally capable to measure energy on Bluetooth channels, e.g. as they would need to be compliant with IEEE 802.15.4. Scanners applying this algorithm can achieve a low latency whilst consuming only a fraction of the power that existing mechanisms can achieve at a similar latency. Furthermore, the power consumption can scale with the incoming network traffic and in contrast to the existing mechanisms, scanners can operate without any frame loss given ideal network conditions. The algorithm does not require any changes to advertisers, hence, stays compatible with existing devices. Performance evaluated via simulation and experiments on real hardware shows a 37 percent lower power consumption compared to the best existing scan setting while even achieving a slightly lower latency which proves that this algorithm can be used to improve the quality of service of connection-less Bluetooth communication or reduce the connection establishment time of connection-oriented communication.
We present a novel approach that utilizes BLE packets sent from generic BLE capable radios to synthesize an FSK-(like) addressable wake-up packet. A wake-up receiver system was developed from off-the-shelf components to detect these packets. It makes use of two differential signal paths separated by passive band-pass filters. After the rectification of each channel a differential amplifier compares the signals and the resulting wake-up signal is evaluated by an AS3933 wake-up receiver IC. Overall, the combination of these techniques contributes to a BLE compatible wake-up system which is more robust than traditional OOK wake-up systems. Thus, increasing wake-up range, while still maintaining a low energy budget. The proof-of-concept setup achieved a sensitivity of -47.8 dBm at a power consumption of 18.5 uW during passive listening. The system has a latency of 31.8 ms with a symbol rate of 1437 Baud.
In this contribution, we present a novel 3D printed multi-material, electromagnetic vibration harvester. The harvester is based on a cantilever design and utilizes an embedded constantan wire within a matrix of polyethylene terephthalate glycol (PETG). A prototype has been manufactured with a combination of a fused filament fabrication (FFF) printer and a robot with a custom-made tool.
Efficient collaborative robotic applications need a combination of speed and separation monitoring, and power and force limiting operations. While most collaborative robots have built-in sensors for power and force limiting operations, there are none with built-in sensor systems for speed and separation monitoring. This paper proposes a system for speed and separation monitoring directly from the gripper of the robot. It can monitor separation distances of up to three meters. We used single-pixel Time-of-Flight sensors to measure the separation distance between the gripper and the next obstacle perpendicular to it. This is the first system capable of measuring separation distances of up to three meters directly from the robot's gripper.
Avoiding collisions between a robot arm and any obstacle in its path is essential to human-robot collaboration. Multiple systems are available that can detect obstacles in the robot's way prior and subsequent to a collision. The systems work well in different areas surrounding the robot. One area that is difficult to handle is the area that is hidden by the robot arm. This paper focuses on pick and place maneuvers, especially on obstacle detection in between the robot arm and the table that robot is located on. It introduces the use of single pixel time-of-flight sensors to detect obstacles directly from the robot arm. The proposed approach reduces the complexity of the problem by locking axes of the robot that are not needed for the pick and place movement. The comparison of simulated results and laboratory measurements show concordance.
Human-robot collaboration plays a strong role in industrial production processes. The ISO/TS 15066 defines four different methods of collaboration between humans and robots. So far, there was no robotic system available that incorporates all four collaboration methods at once. Especially for the speed and separation monitoring, there was no sensor system available that can easily be attached directly to an off-the-shelf industrial robot arm and that is capable of detecting obstacles in distances from a few millimeters up to five meters. This paper presented first results of using a 3D time-of-flight camera directly on an industrial robot arm for obstacle detection in human-robot collaboration. We attached a Visionary-T camera from SICK to the flange of a KUKA LBR iiwa 7 R800. With Matlab, we evaluated the pictures and found that it works very well for detecting obstacles in a distance range starting from 0.5 m and up to 5 m.
In medical applications wireless technologies are not widely spread. Today they are mainly used in non latency-critical applications where reliability can be guaranteed through retransmission protocols and error correction mechanisms. By using retransmission protocols within the disturbed shared wireless channel latency will increase. Therefore retransmission protocols are not sufficient for removing latency-critical wired connections within operating rooms such as foot switches. Todays research aims to improve reliability through the physical characteristics of the wireless channel by using diversity methods and more robust modulation. In this paper an Architecture for building up a reliable network is presented. The Architecture offers the possibility for devices with different reliability, latency and energy consumption requirements to participate. Furthermore reliability, latency and energy consumption are scalable for every single participant.
The paper recommends an approach to estimate effectively the probability of buffer overflow in high-speed communication networks, capable of carrying diverse traffic, including self-similar teletraffic, and supporting diverse levels of quality of service. Simulations with stochastic, long-range dependent self-similar traffic source models are conducted. A new efficient algorithm, based on a variant of the RESTART/LRE method, is developed and applied to accelerate the buffer overflow simulation in a finite buffer single server model under long-range dependent self-similar traffic load with different buffer sizes. Numerical examples and simulation results are shown
The following paper presents the results of a feasibility study about Bluetooth Low Energy (BLE) based wireless sensors. The development of industrial wireless sensors leads to important demands for the wireless technologies like a low energy consumption and a resource saving simple protocol stack. Bluetooth Low Energy (BLE) is a rather new wireless standard which will completely fulfill these fundamental requirements. A self-designed BLE sensor system has been used to explore the common applicability of BLE for wireless sensor systems. The evaluation results of various analyses with the BLE sensor system are now presented in this paper.