Refine
Document Type
- Article (reviewed) (3) (remove)
Language
- English (3)
Is part of the Bibliography
- yes (3) (remove)
Keywords
- Battery pack (1)
- Lithium-ion battery (1)
- Single cell (1)
- State of charge (SOC) (1)
- State of health (SOH) (1)
- Voltage-controlled model (VCM) (1)
- batteries (1)
- charge (1)
- voltage (1)
Institute
Open Access
- Open Access (3)
- Diamond (1)
- Gold (1)
This article presents a comparative experimental study of the electrical, structural and chemical properties of large‐format, 180 Ah prismatic lithium iron phosphate (LFP)/graphite lithium‐ion battery cells from two different manufacturers. These cells are particularly used in the field of stationary energy storage such as home‐storage systems. The investigations include (1) cell‐to‐cell performance assessment, for which a total of 28 cells was tested from each manufacturer, (2) electrical charge/discharge characteristics at different currents and ambient temperatures, (3) internal cell geometries, components, and weight analysis after cell opening, (4) microstructural analysis of the electrodes via light microscopy and scanning electron microscopy, (5) chemical analysis of the electrode materials using energy‐dispersive X‐ray spectroscopy, and (6) mathematical analysis of the electrode balances. The combined results give a detailed and comparative insight into the cell characteristics, providing essential information needed for system integration. The study also provides complete and self‐consistent parameter sets for the use in cells models needed for performance prediction or state diagnosis.
The accurate diagnosis of state of charge (SOC) and state of health (SOH) is of utmost importance for battery users and for battery manufacturers. State diagnosis is commonly based on measuring battery current and using it in Coulomb counters or as input for a current-controlled model. Here we introduce a new algorithm based on measuring battery voltage and using it as input for a voltage-controlled model. We demonstrate the algorithm using fresh and pre-aged lithium-ion battery single cells operated under well-defined laboratory conditions on full cycles, shallow cycles, and a dynamic battery electric vehicle load profile. We show that both SOC and SOH are accurately estimated using a simple equivalent circuit model. The new algorithm is self-calibrating, is robust with respect to cell aging, allows to estimate SOH from arbitrary load profiles, and is numerically simpler than state-of-the-art model-based methods.
Batteries typically consist of multiple individual cells connected in series. Here we demonstrate single-cell state of charge (SOC) and state of health (SOH) diagnosis in a 24 V class lithium-ion battery. To this goal, we introduce and apply a novel, highly efficient algorithm based on a voltage-controlled model (VCM). The battery, consisting of eight single cells, is cycled over a duration of five months under a simple cycling protocol between 20 % and 100 % SOC. The cell-to-cell standard deviations obtained with the novel algorithm were 1.25 SOC-% and 1.07 SOH-% at beginning of cycling. A cell-averaged capacity loss of 9.9 % after five months cycling was observed. While the accuracy of single-cell SOC estimation was limited (probably owed to the flat voltage characteristics of the lithium iron phosphate, LFP, chemistry investigated here), single-cell SOH estimation showed a high accuracy (2.09 SOH-% mean absolute error compared to laboratory reference tests). Because the algorithm does not require observers, filters, or neural networks, it is computationally very efficient (three seconds analysis time for the complete data set consisting of eight cells with approx. 780.000 measurement points per cell).