Refine
Year of publication
- 2023 (31) (remove)
Document Type
- Conference Proceeding (31) (remove)
Conference Type
- Konferenzartikel (17)
- Konferenz-Abstract (11)
- Konferenz-Poster (1)
- Konferenzband (1)
- Sonstiges (1)
Language
- English (31) (remove)
Is part of the Bibliography
- yes (31) (remove)
Keywords
- Biomechanik (6)
- AI-Aided Innovation (2)
- Creativity (2)
- Festigkeit (2)
- Materialermüdung (2)
- Rissausbreitung (2)
- 100% Renewable (1)
- 3D analysis (1)
- 3D-Druck (1)
- 4D-Druck (1)
Institute
- Fakultät Maschinenbau und Verfahrenstechnik (M+V) (31) (remove)
Open Access
- Closed (17)
- Open Access (14)
- Bronze (8)
- Diamond (4)
- Gold (2)
With recent developments in the Ukrainian-Russian conflict, many are discussing about Germany’s dependency on fossil fuel imports in its energy system, and how can the country proceed with reducing that dependency. With its wide-ranging consumption sectors, the electricity sector comes as the perfect choice to start with. Recent reports showed that the German federal government is already intending to have a fully renewable electricity by 2035 while exploiting all possible clean power options. This was published in the federal government’s climate emergency program (Easter Package) in early 2022. The aim of this package is to initiate a rapid transition and decarbonization of the electricity sector. The Easter Package expects an enormous growth of renewable energies to a completely new level, with already at least 80% renewable gross energy consumption, with extensive and broad deployment of different generation technologies on various scales. This paper will discuss this ambitious plan and outline some insights into this huge and rapidly increasing step, and show how much will Germany need in order to achieve this huge milestone towards a fully green supply of the electricity sector. Different scenarios and shares of renewables will be investigated in order to elaborate on preponed climate-neutral goal of the electricity sector by 2035. The results pointed out some promising aspects in achieving a 100% renewable power, with massive investments in both generation and storage technologies.
In this paper we report on further success of our work to develop a multi-method energy optimization which works with a digital twin concept. The twin concept serves to replicate production processes of different kinds of production companies, including complex energy systems and test market interactions to then use them for model predictive optimizing. The presented work finally reports about the performed flexibility assessment leading to a flexibility audit with a list of measures and the impact of energy optimizations made related to interactions with the local power grid i.e., the exchange node of the low voltage distribution grid. The analysis and continuous exploration of flexibilities as well as the exchange with energy markets require a “guide” leading to continuous optimization with a further tool like the Flexibility Survey and Control Panel helping decision-making processes on the day-ahead horizon for real production plants or the investment planning to improve machinery, staff schedules and production
infrastructure.
Polyarticulated active prostheses constitute a promising solution for upper limb amputees. The bottleneck for their adoption though, is the lack of intuitive control. In this context, machine learning algorithms based on pattern recognition from electromyographic (EMG) signals represent a great opportunity for naturally operating prosthetic devices, but their performance is strongly affected by the selection of input features. In this study, we investigated different combinations of 13 EMG-derived features obtained from EMG signals of healthy individuals performing upper limb movements and tested their performance for movement classification using an Artificial Neural Network. We found that input data (i.e., the set of input features) can be reduced by more than 50% without any loss in accuracy, while diminishing the computing time required to train the classifier. Our results indicate that input features must be properly selected in order to optimize prosthetic control.
To improve the building’s energy efficiency many parameters should be assessed considering the building envelope, energy loads, occupation, and HVAC systems. Fenestration is among the most important variables impacting residential building indoor temperatures. So, it is crucial to use the most optimal energy-efficient window glazing in buildings to reduce energy consumption and at the same time provide visual daylight comfort and thermal comfort. Many studies have focused on the improvement of building energy efficiency focusing on the building envelope or the heating, ventilation, and cooling systems. But just a few studies have focused on studying the effect of glazing on building energy consumption. Thus, this paper aims to study the influence of different glazing types on the building’s heating and cooling energy consumption. A real case study building located under a semi-arid climate was used. The building energy model has been conducted using the OpenStudio simulation engine. Building indoor temperature was calibrated using ASHRAE’s statistical indices. Then a comparative analysis was conducted using seven different types of windows including single, double, and triple glazing filled with air and argon. Tripleglazed and double-glazed windows with argon space offer 37% and 32% of annual energy savings. It should be stressed that the methodology developed in this paper could be useful for further studies to improve building energy efficiency using optimal window glazing.
The variable refrigerant flow system is one of the best heating, ventilation, and air conditioning systems (HVAC) thanks to its ability to provide thermal comfort inside buildings. But, at the same time, these systems are considered one of the most energy-consuming systems in the building sector. Thus, it is crucial to well size the system according to the building’s cooling and heating needs and the indoor temperature fluctuations. Although many researchers have studied the optimization of the building energy performance considering heating or cooling needs, using air handling units, radiant floor heating, and direct expansion valves, few studies have considered the use of multi-objective optimization using only the thermostat setpoints of VRF systems for both cooling and heating needs. Thus, the main aim of this study is to conduct a sensitivity analysis and a multi-objective optimization strategy for a residential building containing a variable refrigerant flow system, to evaluate the effect of the building performance on energy consumption and improve the building energy efficiency. The numerical model was based on the EnergyPlus, jEPlus, and jEPlus+EA simulation engines. The approach used in this paper has allowed us to reach significant quantitative energy saving by varying the cooling and heating setpoints and scheduling scenarios. It should be stressed that this approach could be applied to several HVAC systems to reduce energy-building consumption.
Variable refrigerant flow (VRF) and variable air volume (VAV) systems are considered among the best heating, ventilation, and air conditioning systems (HVAC) thanks to their ability to provide cooling and heating in different thermal zones of the same building. As well as their ability to recover the heat rejected from spaces requiring cooling and reuse it to heat another space. Nevertheless, at the same time, these systems are considered one of the most energy-consuming systems in the building. So, it is crucial to well size the system according to the building’s cooling and heating needs and the indoor temperature fluctuations. This study aims to compare these two energy systems by conducting an energy model simulation of a real building under a semi-arid climate for cooling and heating periods. The developed building energy model (BEM) was validated and calibrated using measured and simulated indoor air temperature and energy consumption data. The study aims to evaluate the effect of these HVAC systems on energy consumption and the indoor thermal comfort of the building. The numerical model was based on the Energy Plus simulation engine. The approach used in this paper has allowed us to reach significant quantitative energy saving along with a high level of indoor thermal comfort by using the VRF system compared to the VAV system. The findings prove that the VRF system provides 46.18% of the annual total heating energy savings and 6.14% of the annual cooling and ventilation energy savings compared to the VAV system.
In this paper, we propose an approach for gait phase detection for flat and inclined surfaces that can be used for an ankle-foot orthosis and the humanoid robot Sweaty. To cover different use cases, we use a rule-based algorithm. This offers the required flexibility and real-time capability. The inputs of the algorithm are inertial measurement unit and ankle joint angle signals. We show that the gait phases with the orthosis worn by a human participant and with Sweaty are reliably recognized by the algorithm under the condition of adapted transition conditions. E.g., the specificity for human gait on flat surfaces is 92 %. For the robot Sweaty, 95 % results in fully recognized gait cycles. Furthermore, the algorithm also allows the determination of the inclination angle of the ramp. The sensors of the orthosis provide 6.9 and that of the robot Sweaty 7.7 when walking onto the reference ramp with slope angle 7.9.
Cast aluminum cylinder blocks are frequently used in gasoline and diesel internal combustion engines because of their light-weight advantage. However, the disadvantage of aluminum alloys is their relatively low strength and fatigue resistance which make aluminum blocks prone to fatigue cracking. Engine blocks must withstand a combination of low-cycle fatigue (LCF) thermal loads and high-cycle fatigue (HCF) combustion and dynamic loads. Reliable computational methods are needed that allow for accurate fatigue assessment of cylinder blocks under this combined loading. In several publications, the mechanism-based thermomechanical fatigue (TMF) damage model DTMF describing the growth of short fatigue cracks has been extended to include the effect of both LCF thermal loads and superimposed HCF loadings. This approach is applied to the finite life fatigue assessment of an aluminum cylinder block. The required material properties related to LCF are determined from uniaxial LCF tests. The additional material properties required for the assessment of superimposed HCF are obtained from the literature for similar materials. The predictions of the model agree well with engine dyno test results. Finally, some improvements to the current process are discussed.
Sweaty has already participated several times in RoboCup soccer competitions (Adult Size). Now the work is focused coordinating the play of two robots. Moreover, we are working on stabilizing the gait by adding additional sensor information. An ongoing work is the optimization of the control strategy by balancing between impedance and position control. By minimizing the jerk, gait and overall gameplay should improve significantly.
In 4D printing an additively manufactured component is given the ability to change its shape or function under the influence of an external stimulus. To achieve this, special smart materials are used that are able to react to external stimuli in a specific way. So far, a number of different stimuli have already been investigated and initial applications have been impressively demonstrated, such as self-folding bodies and simple grippers. However, a methodical specification for the selection of the stimuli and their implementation was not yet in the foreground of the development.
The focus of this work is therefore to develop a methodical approach with which the technology of 4DP can be used in a solution- and application-oriented manner. The developed approach is based on the conventional design methodology for product development to solve given problems in a structured way. This method is extended by specific approaches under consideration of the 4D printing and smart materials.
To illustrate the developed method, it is implemented in practice using a problem definition in the form of an application example. In this example, which represents the recovery of an object from a difficult-to-access environment, the individual functions of positioning, gripping and extraction are implemented using 4D printing. The material extrusion process is used for additive manufacturing of all components of the example. Finally, the functions are successfully tested. The developed approach offers an innovative and methodical approach to systematically solve technical complex problems using 4DP and smart materials.
4D printing (4DP) is an evolutionary step of 3D printing, which includes the fourth dimension, in this case the time. In different time steps the printed structure shows different shapes, influenced by external stimuli like light, temperature, pH value, electric or magnetic field. The advantage of 4DP is the solution of technical problems without the need for complex internal energy supply via cables or pipes. Previous approaches to 4D printing with magnetoresponsive materials only use materials with limited usability (e.g. hydrogels) and complex programming during the manufacturing process (e.g. using magnets on the nozzle). The 4D printing using unmagnetized particles and the later magnetization allows the use of a standard 3D printer and has the advantage of being easily reproducible and relatively inexpensive for further application. Therefore, a magnetoresponsive feedstock filament is produced which shows elastic and magnetic properties. In a first step, pellets are produced by compounding polymer with magnetic particles. In a second step, those pellets are extruded in form of filament. This filament is printed using a conventional printing system for Material Extrusion (MEX-TRB/P). Various prototypes have been printed, deformed and magnetized, which is called programming. In comparison to shape memory polymers (SMP) the repeatability of the movement is better. The results show the possibilities of application and function of magnetoresponsive materials. In addition, an understanding of the behaviour of this novel material is achieved.
A smart energy concept was designed and implemented for a cluster of 5 existing multi-family houses, which combines heat pumps, photovoltaic (PV) modules and combined heat and power units (CHP) to achieve energy- and cost-efficient operation. Measurement results of the first year of operation show that the local power generation by PV modules and CHP unit has a positive effect on the electrical self-sufficiency by reducing electricity import from the grid. In winter, when the CHP unit operates continuously for long periods, the entire electricity for the heat pump and 91 % of the total electricity demand of the neighborhood are supplied locally. In summer, only 53 % is generated within the neighborhood. The use of a specifically developed energy management system EMS is intended to further increase this share. CO2 emissions for heating and electricity of the neighborhood are evaluated and amount to 18.4 kg/(m2a). Compared to the previous energy system consisting of gas boilers (29.1 kg/(m2a)), savings of 37 % are achieved with electricity consumption from the grid being reduced by 65 %. In the second construction stage, an additional heat pump, CHP unit and PV modules will be added. The measurement results indicate that the final district energy system is likely to achieve the ambitious CO2 reduction goal of -50% and further increase the self-sufficiency of the district.
Enhancing engineering creativity with automated formulation of elementary solution principles
(2023)
The paper describes a method for the automated formulation of elementary creative stimuli for product or process design at different levels of abstraction and in different engineering domains. The experimental study evaluates the impact of structured automated idea generation on inventive thinking in engineering design and compares it with previous experimental studies in educational and industrial settings. The outlook highlights the benefits of using automated ideation in the context of AI-assisted invention and innovation.
The increasing diffusion of rapidly developing AI technologies led to the idea of the experiment to combine TRIZ-based automated idea generation with the natural language processing tool ChatGPT, using the chatbot to interpret the automatically generated elementary solution principles. The article explores the opportunities and benefits of a novel AI-enhanced approach to teaching systematic innovation, analyses the learning experience, identifies the factors that affect students' innovation and problem-solving performance, and highlights the main difficulties students face, especially in interdisciplinary problems.
Turbocharger housings in internal combustion engines are subjected to severe mechanical and thermal cyclic loads throughout their life-time or during engine testing. The combination of thermal transients and mechanical load cycling results in a complex evolution of damage, leading to thermo-mechanical fatigue (TMF) of the material. For the computational TMF life assessment of high temperature components, the DTMF model can provide reliable TMF life predictions. The model is based on a short fatigue crack growth law and uses local finite-element (FE) results to predict the number of cycles to failure for a technical crack. In engine applications, it is nowadays often acceptable to have short cracks as long as they do not propagate and cause loss of function of the component. Thus, it is necessary to predict not only potential crack locations and the corresponding number of cycles for a technical crack, but also to determine subsequent crack growth or even a possible crack arrest. In this work, a method is proposed that allows the simulation of TMF crack growth in high temperature components using FE simulations and non-linear fracture mechanics (NLFM).
A NLFM based crack growth simulation method is described. This method starts with the FE analysis of a component. In this paper, the method is demonstrated for an automotive turbocharger housing subjected to TMF loading. A transient elastic-viscoplastic FE analysis is used to simulate four heating and cooling cycles of an engine test. The stresses, inelastic strains, and temperature histories from the FEA are then used to perform TMF life predictions using the standard DTMF model. The crack position and the crack plane of critical hotspots are then identified. Simulated cracks are inserted at the hotspots. For the model demonstrated, cracks were inserted at two hotspot locations. The ΔJ integral is computed as a fracture mechanics parameter at each point along the crack-front, and the crack extension of each point is then evaluated, allowing the crack to grow iteratively. The paper concludes with a comparison of the crack growth curves for both hotspots with experimental results.