Refine
Year of publication
Document Type
- Conference Proceeding (19)
- Article (reviewed) (15)
- Article (unreviewed) (3)
- Patent (2)
- Doctoral Thesis (1)
- Report (1)
Conference Type
- Konferenzartikel (18)
- Konferenzband (1)
Keywords
- Blockchain (5)
- blockchain (4)
- Internet of Things (3)
- machine learning (3)
- Eingebettetes System (2)
- IIoT (2)
- Neural networks (2)
- Scalability (2)
- efficient training (2)
- predictive maintenance (2)
Institute
- ivESK - Institut für verlässliche Embedded Systems und Kommunikationselektronik (41) (remove)
Open Access
- Open Access (41) (remove)
This article deals with the problem of wireless synchronization between onboard computing devices of small-sized unmanned aerial vehicles (SUAV) equipped with integrated wireless chips (IWC). Accurate synchronization between several devices requires the precise timestamping of batches transmitting and receiving on each of them. The best precision is demonstrated by those solutions where timestamping is performed on the PHY level, right after modulation/demodulation of the batch. Nowadays, most of the currently produced IWC are Systems-on-a-Chip (SoC) that include both PHY and MAC, implemented with one or several processor cores application. SoC allows create more cost and energy efficient wireless devices. At the same time, it limits the developers direct access to the internal signals and significantly complicates precise timestamping for sent and received batches, required for mutual synchronization of industrial devices. Some modern IEEE 802.11 IWCs have inbuilt functions that use internal chip clock to register timestamps. However, high jitter of the interfaces between the external device and IWC degrades the comparison of the timestamps from the internal clock to those registered by external devices. To solve this problem, the article proposes a novel approach to the synchronization, based on the analysis of IWC receiver input potential. The benefit of this approach is that there is no need to demodulate and decode the received batches, thus allowing it implementation with low-cost IWCs. In this araticle, Cypress CYW43438 was taken as an example for designing hardware and software solutions for synchronization between two SUAV onboard computing devices, equipped with IWC. The results of the performed experimental studies reveal that mutual synchronization error of the proposed method does not exceed 10 μs.
Die Erfindung betrifft ein Verfahren zum Maximieren der von einer analogen Entropiequelle abgeleiteten Entropie, wobei das Verfahren folgende Schritte aufweist:- Bereitstellen von Eingabedaten für die analoge Entropiequelle (2);- Erzeugen von Rückgabewerten durch die analoge Entropiequelle basierend auf den Eingabedaten (3); und- Gruppieren der Rückgabewerte, wobei das Gruppieren der Rückgabewerte ein Anwenden von Versätzen auf Rückgabewerte aufweist (4).
Deep learning approaches are becoming increasingly important for the estimation of the Remaining Useful Life (RUL) of mechanical elements such as bearings. This paper proposes and evaluates a novel transfer learning-based approach for RUL estimations of different bearing types with small datasets and low sampling rates. The approach is based on an intermediate domain that abstracts features of the bearings based on their fault frequencies. The features are processed by convolutional layers. Finally, the RUL estimation is performed using a Long Short-Term Memory (LSTM) network. The transfer learning relies on a fixed-feature extraction. This novel deep learning approach successfully uses data of a low-frequency range, which is a precondition to use low-cost sensors. It is validated against the IEEE PHM 2012 Data Challenge, where it outperforms the winning approach. The results show its suitability for low-frequency sensor data and for efficient and effective transfer learning between different bearing types.
The last decades have seen the evolution of industrial production into more sophisticated processes. The development of specialized, high-end machines has increased the importance of predictive maintenance of mechanical systems to produce high-quality goods and avoid machine breakdowns. Predictive maintenance has two main objectives: to classify the current status of a machine component and to predict the maintenance interval by estimating its remaining useful life (RUL). Nowadays, both objectives are covered by machine learning and deep learning approaches and require large training datasets that are often not available. One possible solution may be transfer learning, where the knowledge of a larger dataset is transferred to a smaller one. This thesis is primarily concerned with transfer learning for predictive maintenance for fault classification and RUL estimation. The first part presents the state-of-the-art machine learning techniques with a focus on techniques applicable to predictive maintenance tasks (Chapter 2). This is followed by a presentation of the machine tool background and current research that applies the previously explained machine learning techniques to predictive maintenance tasks (Chapter 3). One novelty of this thesis is that it introduces a new intermediate domain that represents data by focusing on the relevant information to allow the data to be used on different domains without losing relevant information (Chapter 4). The proposed solution is optimized for rotating elements. Therefore, the presented intermediate domain creates different layers by focusing on the fault frequencies of the rotating elements. Another novelty of this thesis is its semi and unsupervised transfer learning-based fault classification approach for different component types under different process conditions (Chapter 5). It is based on the intermediate domain utilized by a convolutional neural network (CNN). In addition, a novel unsupervised transfer learning loss function is presented based on the maximum mean discrepancy (MMD), one of the state-of-the-art algorithms. It extends the MMD by considering the intermediate domain layers; therefore, it is called layered maximum mean discrepancy (LMMD). Another novelty is an RUL estimation transfer learning approach for different component types based on the data of accelerometers with low sampling rates (Chapter 6). It applies the feature extraction concepts of the classification approach: the presented intermediate domain and the convolutional layers. The features are then used as input for a long short-term memory (LSTM) network. The transfer learning is based on fixed feature extraction, where the trained convolutional layers are taken over. Only the LSTM network has to be trained again. The intermediate domain supports this transfer learning type, as it should be similar for different component types. In addition, it enables the practical usage of accelerometers with low sampling rates during transfer learning, which is an absolute novelty. All presented novelties are validated in detailed case studies using the example of bearings (Chapter 7). In doing so, their superiority over state-of-the-art approaches is demonstrated.
The CAN bus still is an important fieldbus in various domains, e.g. for in-car communication or automation applications. To counter security threats and concerns in such scenarios we design, implement, and evaluate the use of an end-to-end security concept based on the Transport Layer Security protocol. It is used to establish authenticated, integrity-checked, and confidential communication channels between field devices connected via CAN. Our performance measurements show that it is possible to use TLS at least for non time-critical applications, as well as for generic embedded networks.
Wireless communication systems more and more become part of our daily live. Especially with the Internet of Things (IoT) the overall connectivity increases rapidly since everyday objects become part of the global network. For this purpose several new wireless protocols have arisen, whereas 6LoWPAN (IPv6 over Low power Wireless Personal Area Networks) can be seen as one of the most important protocols within this sector. Originally designed on top of the IEEE802.15.4 standard it is a subject to various adaptions that will allow to use 6LoWPAN over different technologies; e.g. DECT Ultra Low Energy (ULE). Although this high connectivity offers a lot of new possibilities, there are several requirements and pitfalls coming along with such new systems. With an increasing number of connected devices the interoperability between different providers is one of the biggest challenges, which makes it necessary to verify the functionality and stability of the devices and the network. Therefore testing becomes one of the key components that decides on success or failure of such a system. Although there are several protocol implementations commonly available; e.g., for IoT based systems, there is still a lack of according tools and environments as well as for functional and conformance testing. This article describes the architecture and functioning of the proposed test framework based on Testing and Test Control Notation Version 3 (TTCN-3) for 6LoWPAN over ULE networks.
Training deep neural networks using backpropagation is very memory and computationally intensive. This makes it difficult to run on-device learning or fine-tune neural networks on tiny, embedded devices such as low-power micro-controller units (MCUs). Sparse backpropagation algorithms try to reduce the computational load of on-device learning by training only a subset of the weights and biases. Existing approaches use a static number of weights to train. A poor choice of this so-called backpropagation ratio limits either the computational gain or can lead to severe accuracy losses. In this paper we present TinyProp, the first sparse backpropagation method that dynamically adapts the back-propagation ratio during on-device training for each training step. TinyProp induces a small calculation overhead to sort the elements of the gradient, which does not significantly impact the computational gains. TinyProp works particularly well on fine-tuning trained networks on MCUs, which is a typical use case for embedded applications. For typical datasets from three datasets MNIST, DCASE2020 and CIFAR10, we are 5 times faster compared to non-sparse training with an accuracy loss of on average 1%. On average, TinyProp is 2.9 times faster than existing, static sparse backpropagation algorithms and the accuracy loss is reduced on average by 6 % compared to a typical static setting of the back-propagation ratio.
The Internet of Things (IoT), ubiquitous computing and ubiquitous connectivity, Cyber Physical Systems (CPS), ambient intelligence, Machine-to-Machine communication (M2M) or Car-to-Car (C2C)-communication, smart metering, smart grid, telematics, telecare, telehealth – there are many buzzwords around current developments related to the Internet.
This contribution gives an overview on such IoT-applications, as they are already used today to improve the availability of information, increase efficiency, push system limits and extend the value chain. At a closer look, the economic and technical development can be separated into different phases. It is interesting that we are currently at the threshold to a new phase, with decentralized and cooperative communication and control nodes as cornerstones. Thus, embedded systems and their connectivity are in the middle of the scene.
This recent development is described along with some example projects from the author’s team which are used in industrial automation, energy supply and distribution (home automation and smart metering), traffic engineering (cooperative driver assistance systems), and in telehealth and telecare.
Spatially Distributed Wireless Networks (SDWN) are one of the basic technologies for the Internet of Things (IoT) and (Industrial) Internet of Things (IIoT) applications. These SDWN for many of these applications has strict requirements such as low cost, simple installation and operations, and high potential flexibility and mobility. Among the different Narrowband Wireless Wide Area Networking (NBWWAN) technologies, which are introduced to address these categories of wireless networking requirements, Narrowband Internet of Things (NB-IoT) is getting more traction due to attractive system parameters, energy-saving mode of operation with low data rates and bandwidth, and its applicability in 5G use cases. Since several technologies are available and because the underlying use cases come with various requirements, it is essential to perform a systematic comparative analysis of competing technologies to choose the right technology. It is also important to perform testing during different phases of the system development life cycle. This paper describes the systematic test environment for automated testing of radio communication and systematic measurements of the performance of NB-IoT.
In recent years, both the Internet of Things (IoT) and blockchain technologies have been highly influential and revolutionary. IoT enables companies to embrace Industry 4.0, the Fourth Industrial Revolution, which benefits from communication and connectivity to reduce cost and to increase productivity through sensor-based autonomy. These automated systems can be further refined with smart contracts that are executed within a blockchain, thereby increasing transparency through continuous and indisputable logging. Ideally, the level of security for these IoT devices shall be very high, as they are specifically designed for this autonomous and networked environment. This paper discusses a use case of a company with legacy devices that wants to benefit from the features and functionality of blockchain technology. In particular, the implications of retrofit solutions are analyzed. The use of the BISS:4.0 platform is proposed as the underlying infrastructure. BISS:4.0 is
intended to integrate the blockchain technologies into existing enterprise environments. Furthermore, a security analysis of IoT and blockchain present attacks and countermeasures are presented that are identified and applied to the mentioned use case.
Schlussbericht VanAssist
(2021)
Industrial companies can use blockchain to assist them in resolving their trust and security issues. In this research, we provide a fully distributed blockchain-based architecture for industrial IoT, relying on trust management and reputation to enhance nodes’ trustworthiness. The purpose of this contribution is to introduce our system architecture to show how to secure network access for users with dynamic authorization management. All decisions in the system are made by trustful nodes’ consensus and are fully distributed. The remarkable feature of this system architecture is that the influence of the nodes’ power is lowered depending on their Proof of Work (PoW) and Proof of Stake (PoS), and the nodes’ significance and authority is determined by their behavior in the network.
This impact is based on game theory and an incentive mechanism for reputation between nodes. This system design can be used on legacy machines, which means that security and distributed systems
can be put in place at a low cost on industrial systems. While there are no numerical results yet, this work, based on the open questions regarding the majority problem and the proposed solutions based on a game-theoretic mechanism and a trust management system, points to what and how industrial IoT and existing blockchain frameworks that are focusing only on the power of PoW and PoS can be secured more effectively.
With many advances in sensor technology and the Internet of Things, Vehicle Ad Hoc Net- work (VANET) is becoming a new generation. VANET’s current technical challenges are deploying decentralized architecture and protecting privacy. Because Blockchain features are decentralized, distributed, mass storage, and non-manipulation features, this paper designs a new decentralized architecture using Blockchain technology called Blockchain-based VANET. Blockchain-based VANET can effectively resolve centralized problems and mutual distrust between VANET units. To achieve this, it is needed to provide scalability on the blockchain to run for VANET. In this system, our focus is on the reliability of incoming messages on the network. Vehicles check the validity of the received messages using the proposed Bayesian formula for trust management system and some information saved in the Blockchain. Then, based on the validation result, the vehicle computes a rate for each message type and message source vehicle. Vehicles upload the computed rates to Roadside Units (RSUs) in order to calculate the net reliability value. Finally, RSUs using a sharding consensus mechanism generate blocks, including the net reliability value as a transaction. In this system, all RSUs collaboratively maintain the latest updated Blockchain. Our experimental results show that the proposed system is effective, scalable and dependable in data gathering, computing, organization, and retrieval of trust values in VANET.
Environmental Monitoring is an attractive application field for Wireless Sensor Network (WSN). Water Level Monitoring helps to increase the efficiency of water distribution and management. In Pakistan, the world’s largest irrigation system covers 90.000 km of channels which needs to be monitored and managed on different levels. Especially the sensor systems for the small distribution channels need to be low energy and low cost. The distribution presents a technical solution for a communication system which is developed in a research project being co-funded by German Academic Exchange Service (DAAD). The communication module is based on IEEE-802.15.4 transceivers which are enhanced through Wake-On-Radio (WOR) to combine low-energy and real-time behavior. On higher layers, IPv6 (6LoWPAN) and corresponding routing protocols like Routing Protocol for Low power and Lossy Networks (RPL) can extend range of the network. The data are stored in a database and can be viewed online via a web interface. Of course, also automatic data analysis can be performed.
In the area of cloud computing, judging the fulfillment of service-level agreements on a technical level is gaining more and more importance. To support this we introduce privacy preserving set relations as inclusiveness and disjointness based ao Bloom filters. We propose to compose them in a slightly different way by applying a keyed hash function. Besides discussing the correctness of set relations, we analyze how this impacts the privacy of the sets content as well as providing privacy on the sets cardinality. Indeed, our solution proposes to bring another layer of privacy on the sizes. We are in particular interested how the overlapping bits of a Bloom filter impact the privacy level of our approach. We concretely apply our solution to a use case of cloud security audit on access control and present our results with real-world parameters.
Die Erfindung betrifft in einem ersten Aspekt eine Vorrichtung zur transkutanen Aufbringung eines elektrischen Stimulationsreizes auf ein Ohr. Die Vorrichtung umfasst einen Schaltungsträger, mindestens zwei Elektroden sowie eine Steuerungseinheit, wobei die Steuerungseinheit dazu konfiguriert ist, anhand von Stimulationsparametern ein elektrisches Stimulationssignal an den Elektroden zu erzeugen. Dabei ist die Vorrichtung, insbesondere eine Oberfläche des Schaltungsträgers der Vorrichtung, auf eine anatomische Form eines Ohres angepasst, sodass Elektroden auf der Oberfläche des Schaltungsträgers aufgebracht sind und ausgewählte Bereiche des Ohres kontaktieren Die Vorrichtung ist dadurch kennzeichnet, dass diese weiterhin einen Sensor zur Erkennung mindestens eines physiologischen Parameter umfasst und eine Steuerungseinheit dazu konfiguriert ist, anhand des mindestens einen physiologischen Parameters die Stimulationsparameter für den Stimulationsreiz anzupassen.In einem weiteren Aspekt betrifft die Erfindung ein Verfahren zur Herstellung der erfindungsgemäßen Vorrichtung.
MPC-Workshop Juli 2015
(2015)
The paper describes the methodology and experimental results for revealing similarities in thermal dependencies of biases of accelerometers and gyroscopes from 250 inertial MEMS chips (MPU-9250). Temperature profiles were measured on an experimental setup with a Peltier element for temperature control. Classification of temperature curves was carried out with machine learning approach.
A perfect sensor should not have thermal dependency at all. Thus, only sensors inside the clusters with smaller dependency (smaller total temperature slopes) might be pre-selected for production of high accuracy inertial navigation modules. It was found that no unified thermal profile (“family” curve) exists for all sensors in a production batch. However, obviously, sensors might be grouped according to their parameters. Therefore, the temperature compensation profiles might be regressed for each group. 12 slope coefficients on 5 degrees temperature intervals from 0°C to +60°C were used as the features for the k-means++ clustering algorithm.
The minimum number of clusters for all sensors to be well separated from each other by bias thermal profiles in our case is 6. It was found by applying the elbow method. For each cluster a regression curve can be obtained.
The importance of machine learning has been increasing dramatically for years. From assistance systems to production optimisation to support the health sector, almost every area of daily life and industry comes into contact with machine learning. Besides all the benefits that ML brings, the lack of transparency and the difficulty in creating traceability pose major risks. While there are solutions that make the training of machine learning models more transparent, traceability is still a major challenge. Ensuring the identity of a model is another challenge. Unnoticed modification of a model is also a danger when using ML. One solution is to create an ML birth certificate and an ML family tree secured by blockchain technology. Important information about training and changes to the model through retraining can be stored in a blockchain and accessed by any user to create more security and traceability about an ML model.
Legacy industrial communication protocols are proved robust and functional. During the last decades, the industry has invented completely new or advanced versions of the legacy communication solutions. However, even with the high adoption rate of these new solutions, still the majority industry applications run on legacy, mostly fieldbus related technologies. Profibus is one of those technologies that still keep on growing in the market, albeit a slow in market growth in recent years. A retrofit technology that would enable these technologies to connect to the Internet of Things, utilize the ever growing potential of data analysis, predictive maintenance or cloud-based application, while at the same time not changing a running system is fundamental.