Refine
Document Type
- Conference Proceeding (65)
- Article (reviewed) (6)
- Part of a Book (2)
- Master's Thesis (2)
- Doctoral Thesis (1)
- Report (1)
Conference Type
- Konferenzartikel (65)
Language
- English (77) (remove)
Keywords
- Eingebettetes System (3)
- Kommunikation (3)
- 6LoWPAN (2)
- Applikation (2)
- Internet der Dinge (2)
- Predictive maintenance (2)
- industrial communication (2)
- security (2)
- Bearing fault classification (1)
- Bearings (1)
Institute
- ivESK - Institut für verlässliche Embedded Systems und Kommunikationselektronik (77) (remove)
Open Access
- Closed Access (77) (remove)
Wireless sensor networks have found their way into a wide range of applications, among which environmental monitoring systems have attracted increasing interests of researchers. Main challenges for these applications are scalability of the network size and energy efficiency of the spatially distributed nodes. Nodes are mostly battery-powered and spend most of their energy budget on the radio transceiver module. In normal operation modes most energy is spent waiting for incoming frames. A so-called Wake-On-Radio (WOR) technology helps to optimize trade-offs between energy consumption, communication range, complexity of the implementation and response time. We already proposed a new protocol called SmartMAC that makes use of such WOR technology. Furthermore, it gives the possibility to balance the energy consumption between sender and receiver nodes depending on the use case. Based on several calculations and simulations, it was predicted that the SmartMAC protocol was significantly more efficient than other schemes being proposed in recent publications, while preserving a certain backward compatibility with standard IEEE802.15.4 transceivers. To verify this prediction, we implemented the SmartMAC protocol for a given hardware platform. This paper compares the realtime performance of the SmartMAC protocol against simulation results, and proves the measured values are very close to the estimated values. Thus we believe that the proposed MAC algorithms outperforms all other Wake-on-Radio MACs.
Physically Unclonable Functions (PUFs) are hardware-based security primitives, which allow for inherent device fingerprinting. Therefore, intrinsic variation of imperfect manufactured systems is exploited to generate device-specific, unique identifiers. With printed electronics (PE) joining the internet of things (IoT), hardware-based security for novel PE-based systems is of increasing importance. Furthermore, PE offers the possibility for split-manufacturing, which mitigates the risk of PUF response readout by third parties, before commissioning. In this paper, we investigate a printed PUF core as intrinsic variation source for the generation of unique identifiers from a crossbar architecture. The printed crossbar PUF is verified by simulation of a 8×8-cells crossbar, which can be utilized to generate 32-bit wide identifiers. Further focus is on limiting factors regarding printed devices, such as increased parasitics, due to novel materials and required control logic specifications. The simulation results highlight, that the printed crossbar PUF is capable to generate close-to-ideal unique identifiers at the investigated feature size. As proof of concept a 2×2-cells printed crossbar PUF core is fabricated and electrically characterized.
Due to its potential in improving the efficiency of energy supply, smart energy metering (SEM) has become an area of interest with the surge in Internet of Things (IoT). SEM entails remote monitoring and control of the sensors and actuators associated with the energy supply system. This provides a flexible platform to conceive and implement new data driven Demand Side Management (DSM) mechanisms. The IoT enablement allows the data to be gathered and analyzed at requisite granularity. In addition to efficient use of energy resources and provisioning of power, developing countries face an additional challenge of temporal mismatch in generation capacity and load factors. This leads to widespread deployment of inefficient and expensive Uninterruptible Power Supply (UPS) solutions for limited power provisioning during resulting blackouts. Our proposed “Soft-UPS” allows dynamic matching of load and generation through a combination of managed curtailment. This eliminates inefficiencies in the energy and power value chain and allows a data-driven approach to solving a widespread problem in developing countries, simultaneously reducing both upfront and running costs of conventional UPS and storage. A scalable and modular platform is proposed and implemented in this paper. The architecture employs “WiMODino” using LoRaWAN with a “Lite Gateway” and SQLite repository for data storage. Role based access to the system through an android application has also been demonstrated for monitoring and control.
Cryptographic protection of messages requires frequent updates of the symmetric cipher key used for encryption and decryption, respectively. Protocols of legacy IT security, like TLS, SSH, or MACsec implement rekeying under the assumption that, first, application data exchange is allowed to stall occasionally and, second, dedicated control messages to orchestrate the process can be exchanged. In real-time automation applications, the first is generally prohibitive, while the second may induce problematic traffic patterns on the network. We present a novel seamless rekeying approach, which can be embedded into cyclic application data exchanges. Although, being agnostic to the underlying real-time communication system, we developed a demonstrator emulating the widespread industrial Ethernet system PROFINET IO and successfully use this rekeying mechanism.
It is important to minimize the unscheduled downtime of machines caused by outages of machine components in highly automated production lines. Considering machine tools such as, grinding machines, the bearing inside of spindles is one of the most critical components. In the last decade, research has increasingly focused on fault detection of bearings. In addition, the rise of machine learning concepts has also intensified interest in this area. However, up to date, there is no single one-fits-all solution for predictive maintenance of bearings. Most research so far has only looked at individual bearing types at a time.
This paper gives an overview of the most important approaches for bearing-fault analysis in grinding machines. There are two main parts of the analysis presented in this paper. The first part presents the classification of bearing faults, which includes the detection of unhealthy conditions, the position of the error (e.g. at the inner or at the outer ring of the bearing) and the severity, which detects the size of the fault. The second part presents the prediction of remaining useful life, which is important for estimating the productive use of a component before a potential failure, optimizing the replacement costs and minimizing downtime.
This paper presents an extended version of a previously published Bayesian algorithm for the automatic correction of the positions of the equipment on the map with simultaneous mobile object trajectory localization (SLAM) in underground mine environment represented by undirected graph. The proposed extended SLAM algorithm requires much less preliminary data on possible equipment positions and uses an additional resample move algorithm to significantly improve the overall performance.
Towards a Formal Verification of Seamless Cryptographic Rekeying in Real-Time Communication Systems
(2022)
This paper makes two contributions to the verification of communication protocols by transition systems. Firstly, the paper presents a modeling of a cyclic communication protocol using a synchronized network of transition systems. This protocol enables seamless cryptographic rekeying embedded into cyclic messages. Secondly, we test the protocol using the model checking verification technique.
In the last decade, deep learning models for condition monitoring of mechanical systems increasingly gained importance. Most of the previous works use data of the same domain (e.g., bearing type) or of a large amount of (labeled) samples. This approach is not valid for many real-world scenarios from industrial use-cases where only a small amount of data, often unlabeled, is available.
In this paper, we propose, evaluate, and compare a novel technique based on an intermediate domain, which creates a new representation of the features in the data and abstracts the defects of rotating elements such as bearings. The results based on an intermediate domain related to characteristic frequencies show an improved accuracy of up to 32 % on small labeled datasets compared to the current state-of-the-art in the time-frequency domain.
Furthermore, a Convolutional Neural Network (CNN) architecture is proposed for transfer learning. We also propose and evaluate a new approach for transfer learning, which we call Layered Maximum Mean Discrepancy (LMMD). This approach is based on the Maximum Mean Discrepancy (MMD) but extends it by considering the special characteristics of the proposed intermediate domain. The presented approach outperforms the traditional combination of Hilbert–Huang Transform (HHT) and S-Transform with MMD on all datasets for unsupervised as well as for semi-supervised learning. In most of our test cases, it also outperforms other state-of-the-art techniques.
This approach is capable of using different types of bearings in the source and target domain under a wide variation of the rotation speed.
It seems to be a widespread impression that the use of strong cryptography inevitably imposes a prohibitive burden on industrial communication systems, at least inasmuch as real-time requirements in cyclic fieldbus communications are concerned. AES-GCM is a leading cryptographic algorithm for authenticated encryption, which protects data against disclosure and manipulations. We study the use of both hardware and software-based implementations of AES-GCM. By simulations as well as measurements on an FPGA-based prototype setup we gain and substantiate an important insight: for devices with a 100 Mbps full-duplex link, a single low-footprint AES-GCM hardware engine can deterministically cope with the worst-case computational load, i.e., even if the device maintains a maximum number of cyclic communication relations with individual cryptographic keys. Our results show that hardware support for AES-GCM in industrial fieldbus components may actually be very lightweight.
For the past few years Low Power Wide Area Networks (LPWAN) have emerged as key technologies for the connectivity of many applications in the Internet of Things (IoT) combining low-data rates with strict cost and energy restrictions. Especially LoRa/LoRaWAN enjoys a high visibility on today’s markets, because of its good performance and its open community. Originally LoRa was designed for operation within the Sub-GHz ISM bands for Industrial, Scientific and Medical applications. However, at the end of 2018, a LoRa-based solution in the 2.4GHz ISM-band was presented promising higher bandwidths and higher data rates. Furthermore, it overcomes the limited duty-cycle prescribed by the regulations in the ISM-bands and therefore also opens doors to many novel application fields. Also, due to higher bandwidths and shorter transmission times, the use of alternative MAC layer protocols becomes very interesting, i.e. for TDMA based-approaches. Within this paper, we propose a system architecture with 2.4GHz LoRa components combining two aspects. On the one hand, we present a design and an implementation of a 2.4GHz based LoRaWAN solution that can be seamlessly integrated into existing LoRaWAN back-hauls. On the other hand, we describe deterministic setup using a Time Slotted Channel Hopping (TSCH) approach as defined in the IEEE802.15.4-2015 standard for industrial applications. Finally, measurements show the performance of the system.
IoT networks are increasingly used as entry points for cyberattacks, as often they offer low-security levels, as they may allow the control of physical systems and as they potentially also open the access to other IT networks and infrastructures. Existing intrusion detection systems (IDS) and intrusion prevention systems (IPS) mostly concentrate on legacy IT networks. Nowadays, they come with a high degree of complexity and adaptivity, including the use of artificial intelligence. It is only recently that these techniques are also applied to IoT networks. In this paper, we present a survey of machine learning and deep learning methods for intrusion detection, and we investigate how previous works used federated learning for IoT cybersecurity. For this, we present an overview of IoT protocols and potential security risks. We also report the techniques and the datasets used in the studied works, discuss the challenges of using ML, DL and FL for IoT cybersecurity and provide future insights.
Modeling of Random Variations in a Switched Capacitor Circuit based Physically Unclonable Function
(2020)
The Internet of Things (IoT) is expanding to a wide range of fields such as home automation, agriculture, environmental monitoring, industrial applications, and many more. Securing tens of billions of interconnected devices in the near future will be one of the biggest challenges. IoT devices are often constrained in terms of computational performance, area, and power, which demand lightweight security solutions. In this context, hardware-intrinsic security, particularly physically unclonable functions (PUFs), can provide lightweight identification and authentication for such devices. In this paper, random capacitor variations in a switched capacitor PUF circuit are used as a source of entropy to generate unique security keys. Furthermore, a mathematical model based on the ordinary least square method is developed to describe the relationship between random variations in capacitors and the resulting output voltages. The model is used to filter out systematic variations in circuit components to improve the quality of the extracted secrets.
The authors claim that location information of stationary ICT components can never be unclassified. They describe how swarm-mapping crowd sourcing is used by Apple and Google to worldwide harvest geo-location information on wireless access points and mobile telecommunication systems' base stations to build up gigantic databases with very exclusive access rights. After having highlighted the known technical facts, in the speculative part of this article, the authors argue how this may impact cyber deterrence strategies of states and alliances understanding the cyberspace as another domain of geostrategic relevance. The states and alliances spectrum of activities due to the potential existence of such databases may range from geopolitical negotiations by institutions understanding international affairs as their core business, mitigation approaches at a technical level, over means of cyber deterrence-by-retaliation.
In a Semi-autonomic cloud auditing architecture we weaved in privacy enhancing mechanisms [15] by applying the public key version of the Somewhat homomorphic encryption (SHE) scheme from [4]. It turns out that the performance of the SHE can be significantly improved by carefully deriving relevant crypto parameters from the concrete cloud auditing use cases for which the scheme serves as a privacy enhancing approach. We provide a generic algorithm for finding good SHE parameters with respect to a given use case scenario by analyzing and taking into consideration security, correctness and performance of the scheme. Also, to show the relevance of our proposed algorithms we apply it to two predominant cloud auditing use cases.
Covert- and side-channels as well as techniques to establish them in cloud computing are in focus of research for quite some time. However, not many concrete mitigation methods have been developed and even less have been adapted and concretely implemented by cloud providers. Thus, we recently conceptually proposed C 3 -Sched a CPU scheduling based approach to mitigate L2 cache covert-channels. Instead of flushing the cache on every context switch, we schedule trusted virtual machines to create noise which prevents potential covert-channels. Additionally, our approach aims on preserving performance by utilizing existing instead of artificial workload while reducing covert-channel related cache flushes to cases where not enough noise has been achieved. In this work we evaluate cache covert-channel mitigation and performance impact of our integration of C 3 -Sched in the XEN credit scheduler. Moreover, we compare it to naive solutions and more competitive approaches.
Time Sensitive Networking (TSN) provides mechanisms to enable deterministic and real-time networking in industrial networks. Configuration of these mechanisms is key to fully deploy and integrate TSN in the networks. The IEEE 802.1 Qcc standard has proposed different configuration models to implement a TSN configuration. Up until now, TSN and its configuration have been explored mostly for Ethernet-based industrial networks. However, they are still considered “work-in-progress” for wireless networks. This work focuses on the fully centralized model and describes a generic concept to enable the configuration of TSN mechanisms in wireless industrial networks. To this end, a configuration entity is implemented to conFigure the wireless end stations to satisfy their requirements. The proposed solution is then validated with the Digital Enhanced Cordless Telecommunication ultra-low energy (DECT ULE) wireless communication protocol.
The authentication method of electronic devices, based on individual forms of correlograms of their internal electric noises, is well-known. Specific physical differences in the components – for example, caused by variations in production quality – cause specific electrical signals, i.e. electric noise, in the electronic device. It is possible to obtain this information and to identify the specific differences of the individual devices using an embedded analog-to-digital converter (ADC). These investigations confirm the possibility to identify and authenticate electronic devices using bit templates, calculated from the sequence of values of the normalized autocorrelation function of noise. Experiments have been performed using personal computers. The probability of correct identification and authentication increases with increasing noise recording duration. As a result of these experiments, an accuracy of 98.1% was achieved for a 1 second-long registration of EM for a set of investigated computers.
The development of Internet of Things (IoT) embedded devices is proliferating, especially in the smart home automation system. However, the devices unfortunately are imposing overhead on the IoT network. Thus, the Internet Engineering Task Force (IETF) have introduced the IPv6 Low-Power Wireless Personal Area Network (6LoWPAN) to provide a solution to this constraint. 6LoWPAN is an Internet Protocol (IP) based communication where it allows each device to connect to the Internet directly. As a result, the power consumption is reduced. However, the limitation of data transmission frame size of the IPv6 Routing Protocol for Low-power and Lossy Network’s (RPL’s) had made it to be the running overhead, and thus consequently degrades the performance of the network in terms of Quality of Service (QoS), especially in a large network. Therefore, HRPL was developed to enhance the RPL protocol to minimize redundant retransmission that causes the routing overhead. We introduced the T-Cut Off Delay to set the limit of the delay and the H field to respond to actions taken within the T-Cut Off Delay. Thus, this paper presents the comparison performance assessment of HRPL between simulation and real-world scenarios (6LoWPAN Smart Home System (6LoSH) testbed) in validating the HRPL functionalities. Our results show that HRPL had successfully reduced the routing overhead when implemented in 6LoSH. The observed Control Traffic Overhead (CTO) packet difference between each experiment is 7.1%, and the convergence time is 9.3%. Further research is recommended to be conducted for these metrics: latency, Packet Delivery Ratio (PDR), and throughput.
During the day-to-day exploitation of localization systems in mines, the technical staff tends to incorrectly rearrange radio equipment: positions of devices may not be accurately marked on a map or their positions may not correspond to the truth. This situation may lead to positioning inaccuracies and errors in the operation of the localization system.This paper presents two Bayesian algorithms for the automatic corrections of positions of the equipment on the map using trajectories restored by the inertial measurement units mounted to mobile objects, like pedestrians and vehicles. As a basis, a predefined map of the mine represented as undirected weighted graph was used as input. The algorithms were implemented using the Simultaneous Localization and Mapping (SLAM) approach.The results prove that both methods are capable to detect misplacement of access points and to provide corresponding corrections. The discrete Bayesian filter outperforms the unscented Kalman filter, which, however, requires more computational power.
RETIS – Real-Time Sensitive Wireless Communication Solution for Industrial Control Applications
(2020)
Ultra-Reliable Low Latency Communications (URLLC) has been always a vital component of many industrial applications. The paper proposes a new wireless URLLC solution called RETIS, which is suitable for factory automation and fast process control applications, where low latency, low jitter, and high data exchange rates are mandatory. In the paper, we describe the communication protocol as well as the hardware structure of the network nodes for implementing the required functionality. Many techniques enabling fast, reliable wireless transmissions are used – short Transmission Time Interval (TTI), Time-Division Multiple Access (TDMA), MIMO, optional duplicated data transfer, Forward Error Correction (FEC), ACK mechanism. Preliminary tests show that reliable end-to-end latency down to 350 μs and packet exchange rate up to 4 kHz can be reached (using quadruple MIMO and standard IEEE 802.15.4 PHY at 250 kbit/s).