Refine
Year of publication
Document Type
- Conference Proceeding (139) (remove)
Conference Type
- Konferenzartikel (88)
- Konferenz-Abstract (36)
- Sonstiges (9)
- Konferenz-Poster (8)
- Konferenzband (1)
Is part of the Bibliography
- yes (139)
Keywords
- injury (9)
- RoboCup (8)
- Biomechanik (5)
- Konstruktion (5)
- biomechanics (5)
- running (5)
- ACL (4)
- Produktentwicklung (4)
- eco-innovation (3)
- sport (3)
Institute
- Fakultät Maschinenbau und Verfahrenstechnik (M+V) (139) (remove)
Open Access
- Open Access (139) (remove)
Variable refrigerant flow (VRF) and variable air volume (VAV) systems are considered among the best heating, ventilation, and air conditioning systems (HVAC) thanks to their ability to provide cooling and heating in different thermal zones of the same building. As well as their ability to recover the heat rejected from spaces requiring cooling and reuse it to heat another space. Nevertheless, at the same time, these systems are considered one of the most energy-consuming systems in the building. So, it is crucial to well size the system according to the building’s cooling and heating needs and the indoor temperature fluctuations. This study aims to compare these two energy systems by conducting an energy model simulation of a real building under a semi-arid climate for cooling and heating periods. The developed building energy model (BEM) was validated and calibrated using measured and simulated indoor air temperature and energy consumption data. The study aims to evaluate the effect of these HVAC systems on energy consumption and the indoor thermal comfort of the building. The numerical model was based on the Energy Plus simulation engine. The approach used in this paper has allowed us to reach significant quantitative energy saving along with a high level of indoor thermal comfort by using the VRF system compared to the VAV system. The findings prove that the VRF system provides 46.18% of the annual total heating energy savings and 6.14% of the annual cooling and ventilation energy savings compared to the VAV system.
The increasing diffusion of rapidly developing AI technologies led to the idea of the experiment to combine TRIZ-based automated idea generation with the natural language processing tool ChatGPT, using the chatbot to interpret the automatically generated elementary solution principles. The article explores the opportunities and benefits of a novel AI-enhanced approach to teaching systematic innovation, analyses the learning experience, identifies the factors that affect students' innovation and problem-solving performance, and highlights the main difficulties students face, especially in interdisciplinary problems.
A smart energy concept was designed and implemented for a cluster of 5 existing multi-family houses, which combines heat pumps, photovoltaic (PV) modules and combined heat and power units (CHP) to achieve energy- and cost-efficient operation. Measurement results of the first year of operation show that the local power generation by PV modules and CHP unit has a positive effect on the electrical self-sufficiency by reducing electricity import from the grid. In winter, when the CHP unit operates continuously for long periods, the entire electricity for the heat pump and 91 % of the total electricity demand of the neighborhood are supplied locally. In summer, only 53 % is generated within the neighborhood. The use of a specifically developed energy management system EMS is intended to further increase this share. CO2 emissions for heating and electricity of the neighborhood are evaluated and amount to 18.4 kg/(m2a). Compared to the previous energy system consisting of gas boilers (29.1 kg/(m2a)), savings of 37 % are achieved with electricity consumption from the grid being reduced by 65 %. In the second construction stage, an additional heat pump, CHP unit and PV modules will be added. The measurement results indicate that the final district energy system is likely to achieve the ambitious CO2 reduction goal of -50% and further increase the self-sufficiency of the district.
Enhancing engineering creativity with automated formulation of elementary solution principles
(2023)
The paper describes a method for the automated formulation of elementary creative stimuli for product or process design at different levels of abstraction and in different engineering domains. The experimental study evaluates the impact of structured automated idea generation on inventive thinking in engineering design and compares it with previous experimental studies in educational and industrial settings. The outlook highlights the benefits of using automated ideation in the context of AI-assisted invention and innovation.
Selbsttests in Lernmanagementsystemen (LMS) ermöglichen es Studierenden, den eigenen Lernfortschritt einzuschätzen. Im Gegensatz zur Einreichung und Korrektur vollständig ausformulierter Aufgabenlösungen nutzen LMS überwiegend die Eingabe der Lösung im Antwort-Auswahl-Verfahren (Single-Choice). Nach didaktischen Ansatz „Physik durch Informatik“ geben die Lernenden stattdessen ihre Aufgabenlösungen in einer Programmiersprache ins LMS ein, was eine automatisierte Rückmeldung erleichtert und das Erreichen einer höheren Kompetenzstufe fördert. Es wurden zehn LMS-Selbsttests erstellt, bei denen die Lösungen zu einer Lehrbuch-Aufgabenstellung jeweils durch Eingabe in einer Programmiersprache und von einer Kontrollgruppe im Antwort-Auswahl-Verfahren abgefragt wurden. Ergebnisse aus dem ersten Einsatz dieser Selbsttests für die Lehrveranstaltung Physik im Studiengang Biotechnologie werden vorgestellt.
The variable refrigerant flow system is one of the best heating, ventilation, and air conditioning systems (HVAC) thanks to its ability to provide thermal comfort inside buildings. But, at the same time, these systems are considered one of the most energy-consuming systems in the building sector. Thus, it is crucial to well size the system according to the building’s cooling and heating needs and the indoor temperature fluctuations. Although many researchers have studied the optimization of the building energy performance considering heating or cooling needs, using air handling units, radiant floor heating, and direct expansion valves, few studies have considered the use of multi-objective optimization using only the thermostat setpoints of VRF systems for both cooling and heating needs. Thus, the main aim of this study is to conduct a sensitivity analysis and a multi-objective optimization strategy for a residential building containing a variable refrigerant flow system, to evaluate the effect of the building performance on energy consumption and improve the building energy efficiency. The numerical model was based on the EnergyPlus, jEPlus, and jEPlus+EA simulation engines. The approach used in this paper has allowed us to reach significant quantitative energy saving by varying the cooling and heating setpoints and scheduling scenarios. It should be stressed that this approach could be applied to several HVAC systems to reduce energy-building consumption.
The title expresses goals the Kansas Geological Survey (KGS) has been working toward for some time. This report extends concepts and objectives developed while working on an earlier effort for effective interactive digital maps on the Internet. That work was reported to the 1998 DMT Workshop in Champaign, Illinois (Ross, 1998). The current project goes beyond previous efforts that focused on methods for serving the contents of a geographic information system (GIS); the points, lines, and polygons representing features of the digital geologic map and the data in the attribute tables of the GIS describing those features.
Digital libraries are providing an increasing amount of data, which is normally structured in a classical way by documents and described by metadata as keywords. The data, even in scientific systems such as digital libraries and virtual research environments, will contain a great amount of noise or information unnecessary for our personal interests. Although there has been a lot of progress in the field of information retrieval, search techniques and other content finding methods, there is still much to be done in the field of information retrieval based on user behavior. This paper presents an approach deployed in the Humboldt Digital Library (HDL) to facilitate the retrieval of relevant information to the users of the system, making recommendations of paragraphs based on their profile and the behavior of other users who share similar profiles. The Humboldt digital library represents an innovative system of open access to the legacy of Alexander von Humboldt in a digital form on the Internet (www.avhumboldt.net). It contributes to the key question, how to present interconnected data in a proper form using information technologies.
This article sets the focus on methods of information technology in the Humboldt Portal, which represents an ongoing research project to develop a virtual research environment on the Internet for the legacy of Alexander von Humboldt. Based on the experiences of developing and providing the Humboldt Digital Library (www.avhumboldt.net) for more than a decade, we defined a working plan to create an Internet portal for comprehensive access to Humboldt’s writings, no matter if documents are provided as PDF files, scan images or XML-TEI documents on external archives (Google Books, Internet Archive, Deutsches Textarchiv, Bibliotheque National de France). Going far beyond services of a digital library we will provide an information network with multimedia assets, which are containing objects like terms, paragraphs, data tables, scan images, or illustrations, together with correlated properties like thematic linkage to other objects, relevant keywords with optional synonyms and dynamic hyperlinks to related translations in different languages. So the Humboldt Portal can contribute to the key question, how to present interconnected data in an appropriate form using information technologies on the Web.
Alexander von Humboldt, a German scientist and explorer of the 19th century, viewed the natural world holistically and described the harmony of nature among the diversity of the physical world as a conjoining between all physical disciplines. He noted in his diary: “Everything is interconnectedness.”
The main feature of Humboldt’s pioneering work was later named “Humboldtian science”, meaning the accurate study of interconnected real phenomena in order to find a definite law and a dynamic cause.
Following Humboldt's idea of nature, an Internet edition of his works must preserve the author’s original intention, retain an awareness of all relevant works, and still adhere to the requirements of scholarly edition.
At the present time, however, the highly unconventional form of his publications has undermined the awareness and a comprehensive study of Humboldt’s works.
Digital libraries should supply dynamic links to sources, maps, images, graphs and relevant texts. New forms of interaction and synthesis between humanistic texts and scientific observation need to be created.
Information technology is the only way to do justice to the broad range of visions, descriptions and the idea of nature of Humboldt’s legacy. It finally leads to virtual research environments as an adequate concept to redesign our digital archives, not only for Humboldt’s documents, but for all interconnected data.
Technology and computer applications influence our daily lives and questions arise concerning the role of artificial intelligence and decision-making algorithms. There are warning voices, that computers can, in theory, emulate human intelligence-and exceed it. This paper points out that a replacement of humans by computers is unlikely, because human thinking is characterized by cognitive heuristics and emotions, which cannot simply be implemented in machines operating with algorithms, procedural data processing or artificial neural networks. However, we are going to share our responsibilities with superior computer systems, which are tracking and surveying all of our digital activities, whereas we have no idea of the decision-making processes inside the machines. It is shown that we need a new digital humanism defining rules of computer responsibilities to avoid digital totalism and comprehensive monitoring and controlling of individuals within the planet Earth.
Autonomous humanoid robots require light weight, high torque and high speed actuators to be able to walk and run. For conventional gears with a fixed gear ratio the product of torque and velocity is constant. On the other hand desired motions require maximum torque and speed. In this paper it is shown that with a variable gear ratio it is possible to vary the relation between torque and velocity. This is achieved by introducing systems of rods and levers to move the joints of our humanoid robot ”Sweaty II”. On the basis of a variable gear ratio low speed and high torque can be achieved for those joint angles, which require this motion mode, whereas high speed and low torque can be realized for those joint angles, where it is favorable for the desired motion.
Sweaty has already participated several times in RoboCup soccer competitions (Adult Size). Now the work is focused coordinating the play of two robots. Moreover, we are working on stabilizing the gait by adding additional sensor information. An ongoing work is the optimization of the control strategy by balancing between impedance and position control. By minimizing the jerk, gait and overall gameplay should improve significantly.
Sweaty has already participated several times in RoboCup soccer competitions (Adult Size). Now the work is focused on stabilizing the gait. Moreover, we would like to overcome the constraints of a ZMP-algorithm that has a horizontal footplate as precondition for the simplification of the equations. In addition we would like to switch between impedance and position control with a fuzzy-like algorithm that might help to minimize jerks when Sweaty’s feet touch the ground.
Sweaty has already participated four times in RoboCup soccer competitions (Adult Size) and came second three times. While 2016 Sweaty needed a lot of luck to be finalist, 2017 Sweaty was a serious adversary in the preliminary rounds. In 2018 Sweaty showed up in the final with some lack of experience and room for improvements, but not without any chance. This paper describes the intended improvements of the humanoid adult size robot Sweaty in order to qualify for the RoboCup 2019 adult size competition.
This paper describes the Sweaty II humanoid adult size robot trying to qualify for the RoboCup 2018 adult size humanoid competition. Sweaty came 2nd in RoboCup 2017 adult size league. The main characteristics of Sweaty are described in the Team Description Paper 2017. The improvements that have been made or are planned to be implemented for RoboCup 2018 are described in this paper.
This paper describes the Sweaty II humanoid adult size robot trying to qualify for the RoboCup 2017 adult size humanoid competition. Sweaty came 2nd in RoboCup 2016 adult size league. The paper describes the main characteristics of Sweaty that made this success possible, and improvements that have been made or are planned to be implemented for RoboCup 2017.
This paper describes the new Sweaty II humanoid adult size robot trying to qualify for the RoboCup 2016 adult size humanoid competition. Based on experiences during RoboCup 2014, the Sweaty robot has been completely redesigned to a new robot Sweaty II. A major change is the use of linear actuators for the legs. Another characteristic is its indirect actuation by means of rods. This allows a variable transmission ratio depending on the angle of a joint.
This paper describes the new Sweaty humanoid adult size robot trying to qualify for the RoboCup 2014 adult size humanoid competition. The robot is built from scratch to eventually allow it to run. One characteristic is that to prevent the motors from overheating, water evaporation is used for cooling. The robot is literally sweating which has given it its name. Another characteristic is, that the motors are not directly connected to the frame but by means of beams. This allows a variable transmission ratio depending on the angle.
Time Resolved Measurements of Soot Concentrations and Mean Particle Sizes during EUDC and ECE Cycles
(2002)
A system for the on-line/in-line measurement of soot particle sizes and concentrations in the undiluted exhaust gas of diesel engines was developed and successfully tested. The unit uses the individual attenuations of three different laser wavelengths and is combined with an optical cell (white principle) with adjustable path lengths from 2.5 to 15 meters.
More than 200 years ago, the scientist Alexander von Humboldt noted in his travel diaries that "everything is interconnectedness", when he was fascinated by nature and the phenomena observed. The view of nature has become much more detailed through the knowledge of phenomena and natural processes, which led to a more precise view of nature shaped by Humboldt. Technological progress and the artificial intelligence of highly developed computer systems are upsetting this view and changing the established world view through a new, unprecedented interaction between man and machinery. Thus we need digital axioms and comprehensive rules and laws for such autonomous acting systems that determine human interaction between cybernetic systems and biological individuals. This digital humanism should encompass our relationship to nature, our handling of the complexity and diversity of nature and the technological influences on society in order to avoid technical colonialism through supercomputers.
Weitsprung mit und ohne Unterschenkelprothese – gleiche Sportart, unterschiedliche Disziplinen
(2022)
The majority of anterior cruciate ligament (ACL) injuries in team sports are non-contact injuries, with cutting maneuvers identified as high-risk tasks. Young female handball players have been shown to be at greater risk for ACL injuries than males. One risk factor for ACL injuries is the magnitude of the knee abduction moment (KAM). Cutting technique variables on foot placement, overall approach and knee kinematics have been shown to influence the KAM. Since injury risk is believed to increase with increasing task complexity, the purpose of the study was to test the effect of task complexity on technique variables that influence the KAM in female handball players during fake-and-cut tasks.
The sharp rise in electricity and oil prices due to the war in Ukraine has caused fluctuations in the results of the previous study about the economic analysis of electric buses. This paper shows how the increase in fuel prices affects the implementation of electric buses. This publication is constructing the Total Cost of Ownership (TCO) model in the small-mid-size city, Offenburg for the transition to electric buses. The future development of costs is estimated and a projection based on learning curves will be carried out. This study intends to introduce a new future prospect by presenting the latest data based on previous research. Through the new TCO result, the cost differences between the existing diesel bus and the electric bus are updated, and also the future prospects for the economic feasibility of the electric bus in a small and midsize city are presented.
An import ban of Russian energy sources to Germany is currently being increasingly discussed. We want to support the discussion by showing a way how the electricity system in Germany can manage low energy imports in the short term and which measures are necessary to still meet the climate protection targets. In this paper, we examine the impact of a complete stop of Russian fossil fuel imports on the electricity sector in Germany, and how this will affect the climate coals of an earlier coal phase-out and climate neutrality by 2045.
Following a scenario-based analysis, the results gave a point of view on how much would be needed to completely rely on the scarce non-renewable energy resources in Germany. Huge amounts of investments would be needed in order to ensure a secure supply of electricity, in both generation energy sources (RES) and energy storage systems (ESS). The key findings are that a rapid expansion of renewables and storage technologies will significantly reduce the dependence of the German electricity system on energy imports. The huge integration of renewable energy does not entail any significant imports of the energy sources natural gas, hard coal, and mineral oil, even in the long term. The results showed that a ban on fossil fuel imports from Russia outlines huge opportunities to go beyond the German government's climate targets, where the 1.5-degree-target is achieved in the electricity system.
During the coronavirus crisis, labs had to be offered in digital form in mechanical engineering at short notice. For this purpose, digital twins of more complex test benches in the field of fluid energy machines were used in the mechanical engineering course, with which the students were able to interact remotely to obtain measurement data. The concept of the respective lab was revised with regard to its implementation as a remote laboratory. Fortunately, real-world labs were able to be fully replaced by remote labs. Student perceptions of remote labs were mostly positive. This paper explains the concept and design of the digital twins and the lab as well as the layout, procedure, and finally the results of the accompanying evaluation. However, the implementation of the digital twins to date does not yet include features that address the tactile experience of working in real-world labs.
The energy system is changing since some years in order to achieve the climate goals from the Paris Agreement which wants to prevent an increase of the global temperature above 2 °C [1]. Decarbonisation of the energy system has become for governments a big challenge and different strategies are being stablished. Germany has set greenhouse gas reduction limits for different years and keeps track of the improvement made yearly. The expansion of renewable energy systems (RES) together with decarbonisation technologies are a key factor to accomplish this objective.
This research is done to analyse the effect of introducing biochar, a decarbonisation technology, and study how it will affect the energy system. Pyrolysis is the process from which biochar is obtained and it is modelled in an open-source energy system model. A sensibility analysis is done in order to assess the effect of changing the biomass potential and the costs for pyrolysis.
The role of pyrolysis is analysed in the form of different future scenarios for the year 2045 to evaluate the impact when the CO2 emission limit is zero. All scenarios are compared to the reference scenario, where pyrolysis is not considered.
Results show that biochar can be used to compensate the emissions from other conventional power plant and achieve an energy transition with lower costs. Furthermore, it was also found that pyrolysis can also reduce the need of flexibility. This study also shows that the biomass potential and the pyrolysis costs can strongly affect the behaviour of pyrolysis in the energy system.
The purpose of this study was to describe the effects of running speed and slope on metatarsophalangeal (MTP) joint kinematics. 22 male and female runners underwent 3D motion analysis on an instrumented treadmill at three different speeds (2.5 m/s, 3.0 m/s, 3.5 m/s). At each speed, participants ran at seven slope conditions (downhill: -15%, -10%, -5%, level, and uphill: +5%, +10%, +15%). We found a significant main effect (p < 0.001) of running speed and slope on peak MTP dorsiflexion and a running speed by slope interaction effect (p < 0.001) for peak MTP dorsiflexion velocity. These findings highlight the need to consider running intensity and environmental factors like running surface inclination when considering MTP joint mechanics and technological aids to support runners.
Effect of downhill running on biomechanical risk factors associated with iliotibial band syndrome
(2022)
The purpose of this study was to identify the influence of downhill running on biomechanical risk factors for iliotibial band syndrome. We conducted a 3D motion analysis of 22 females and males running on an instrumented treadmill at four different inclinations (0%, -5%, -10%, -15%) at a speed of 3.5 m/s. We found significant differences for biomechanical risk factors associated with iliotibial band syndrome. Peak knee flexion angle at initial ground contact (p < .001), peak knee adduction angle (p = .005), and iliotibial band strain (p < .001) systematically increased with increasing slope. Downhill running increases biomechanical risk factors for iliotibial band syndrome. Our results highlight the need to consider the individual running environment in assessing overuse injury risk in runners.
This study aimed to compare a simplified calculation of the knee abduction moment with the traditional inverse dynamics calculation when athletes perform fake-cut maneuvers with different complexities. In the simplified calculation, we multiply the force vector with its lever arm to the knee, projected onto the local coordinate system of the proximal thigh, hence neglecting the inertial contributions from distal segments. We found very strong ranking consistency using Spearman’s rank correlation coefficient when using the simplified method compared to the traditional calculation. Independent of the tasks, the simplified method resulted in higher moments than the inverse dynamics. This was caused by ignoring the moment caused by segment linear acceleration generating a counteracting moment by about 7%. An alternative to the complex calculations of inverse dynamics can be used to investigate the contributions of the GRF magnitude and its lever arm to the knee.
The purpose of this study was to 1) compare knee joint kinematics and kinetics of fake-and-cut tasks of varying complexity in 51 female handball players and 2) present a case study of one athlete who ruptured her ACL three weeks post data collection. External knee joint moments and knee joint angles in all planes at the instance of the peak external knee abduction moment (KAM) as well as moment and angle time curves were analyzed. Peak KAMs and knee internal rotation moments were substantially higher than published values obtained during simple change-of-direction tasks and, along with flexion angles, differed significantly between the tasks. Introducing a ball reception and a static defender increased joint loads while they partially decreased again when anticipation was lacking. Our results suggest to use game-specific assessments of injury risk while complexity levels do not directly increase knee loading. Extreme values of several risk factors for a post-test injured athlete highlight the need and usefulness of appropriate screenings.
To achieve Germany's climate targets, the industrial sector, among others, must be transformed. The decarbonization of industry through the electrification of heating processes is a promising option. In order to investigate this transformation in energy system models, high-resolution temporal demand profiles of the heat and electricity applications for different industries are required. This paper presents a method for generating synthetic electricity and heat load profiles for 14 industry types. Using this methodology, annual profiles with a 15-minute resolution can be generated for both energy demands. First, daily profiles for the electricity demand were generated for 4 different production days. These daily profiles are additionally subdivided into eight end-use application categories. Finally, white noise is applied to the profile of the mechanical drives. The heat profile is similar to the electrical but is subdivided into four temperature ranges and the two applications hot water and space heating. The space heating application is additionally adjusted to the average monthly outdoor temperature. Both time series were generated for the analysis of an electrification of industrial heat application in energy system modelling.
The contribution of the RoofKIT student team to the SDE 21/22 competition is the extension of an existing café in Wuppertal, Germany, to create new functions and living space for the building with simultaneous energetic upgrading. A demonstration unit is built representing a small cut-out of this extension. The developed energy concept was thoroughly simulated by the student team in seminars using Modelica. The system uses mainly solar energy via PVT collectors as the heat source for a brine-water heat pump (space heating and hot water). Energy storage (thermal and electrical) is installed to decouple generation and consumption. Simulation results confirm that carbon neutrality is achieved for the building operation, consuming and generating around 60 kWh/m2a.
Peer-to-peer energy trading and local electricity markets have been widely discussed as new options for the transformation of the energy system from the traditional centralized scheme to the novel decentralized one. Moreover, it has also been proposed as a more favourable alternative for already expiring feed in tariff policies that promote investment in renewable energy sources. Peer-to-peer energy trading is usually defined as the integration of several innovative technologies, that enable both prosumers and consumers to trade electricity, without intermediaries, at a consented price. Furthermore, the techno-economic aspects go hand in hand with the socio-economic aspects, which represent at the end significant barriers that need to be tackled to reach a higher impact on current power systems. Applying a qualitative analysis, two scalable peer-to-peer concepts are presented in this study and the possible participant´s entry probability into such concepts. Results show that consumers with a preference for environmental aspects have in general a higher willingness to participate in peer-to-peer energy trading. Moreover, battery storage systems are a key technology that could elevate the entry probability of prosumers into a peer-to-peer market.
Most recently, the federal government in Germany published new climate goals in order reach climate neutrality by 2045. This paper demonstrates a path to a cost optimal energy supply system for the German power grid until the year 2050. With special regard to regionality, the system is based on yearly myopic optimization with the required energy system transformation measures and the associated system costs. The results point out, that energy storage systems (ESS) are fundamental for renewables integration in order to have a feasible energy transition. Moreover, the investment in storage technologies increased the usage of the solar and wind technologies. Solar energy investments were highly accompanied with the installation of short-term battery storage. Longer-term storage technologies, such as H2, were accompanied with high installations of wind technologies. The results pointed out that hydrogen investments are expected to overrule short-term batteries if their cost continues to decrease sharply. Moreover, with a strong presence of ESS in the energy system, biomass energy is expected to be completely ruled out from the energy mix. With the current emission reduction strategy and without a strong presence of large scale ESS into the system, it is unlikely that the Paris agreement 2° C target by 2050 will be achieved, let alone the 1.5° C.
Lithium-ion batteries show strongly nonlinear behaviour regarding the battery current and state of charge. Therefore, the modelling of lithium-ion batteries is complex. Combining physical and data-driven models in a grey-box model can simplify the modelling. Our focus is on using neural networks, especially neural ordinary differential equations, for grey-box modelling of lithium-ion batteries. A simple equivalent circuit model serves as a basis for the grey-box model. Unknown parameters and dependencies are then replaced by learnable parameters and neural networks. We use experimental full-cycle data and data from pulse tests of a lithium iron phosphate cell to train the model. Finally, we test the model against two dynamic load profiles: one consisting of half cycles and one dynamic load profile representing a home-storage system. The dynamic response of the battery is well captured by the model.
Physik durch Informatik
(2022)
Selbsttests in Lernmanagementsystemen (LMS) ermöglichen es Studierenden, den eigenen Lernfortschritt einzuschätzen. Das didaktische Konzept Physik durch Informatik (PDI) ist charakterisiert durch die Nutzung einer Programmiersprache zur Lösungseingabe bei Mathematik und Physik-Aufgaben. Im Gegensatz zur Lösungseingabe durch Zahlenwerte oder im Antwort-Auswahl-Verfahren erfordert die Implementierung einer Lösung in einer Programmiersprache eine höhere Kompetenzstufe.
The internal crowdsourcing-based ideation within a company can be defined as an involvement of its staff, specialists, managers, and other employees, to propose solution ideas for a pre-defined problem. This paper addresses a question, how many participants of the company-internal ideation process are required to nearly reach the ideation limit for the problems with a finite number of workable solutions. To answer the research question, the author proposes a set of metrics and a non-linear ideation performance function with a positive decreasing slope and ideation limit for the closed-ended problems. Three series of experiments helped to explore relationships between the metric attributes and resulted in a mathematical model which allows companies to predict the productivity metrics of their crowdsourcing ideation activities such as quantity of different ideas and ideation limit as a function of the number of contributors, their average personal creativity and ideation efficiency of a contributors’ group.
Grey-box modelling combines physical and data-driven models to benefit from their respective advantages. Neural ordinary differential equations (NODEs) offer new possibilities for grey-box modelling, as differential equations given by physical laws and neural networks can be combined in a single modelling framework. This simplifies the simulation and optimization and allows to consider irregularly-sampled data during training and evaluation of the model. We demonstrate this approach using two levels of model complexity; first, a simple parallel resistor-capacitor circuit; and second, an equivalent circuit model of a lithium-ion battery cell, where the change of the voltage drop over the resistor-capacitor circuit including its dependence on current and State-of-Charge is implemented as NODE. After training, both models show good agreement with analytical solutions respectively with experimental data.
Die angestrebten Klimaschutzziele erfordern, dass Erneuerbare Energien längerfristig zur Hauptenergiequelle der Energieversorgung werden. Um dieses ehrgeizige Ziel zu erreichen, ist es angebracht konventionelle und erneuerbare Energie oder noch besser nachhaltige Einzelprozesse intelligent miteinander zu verknüpfen.
Das Projekt EBIPREP wird von einer interdisziplinären Forschergruppe bestehend aus Chemikern, Prozessingenieuren und Bioprozessingenieuren sowie Physikern, die auf Sensoren und Prozesssteuerung spezialisiert sind durchgeführt. Das Ziel ist es, neue Lösungen für die Nutzungswege von Holzhackschnitzeln und den bei der mechanischen Trocknung anfallenden Holzpresssaft zu entwickeln. Neben der Hackschnitzelvergasung und der katalytischen Reinigung des Holzgases steht die Nutzung des Holzpresssafts in Biogasanlagen und bei der biotechnologischen Wertstofferzeugung, z.B. bei der Enzymherstellung, im Vordergrund.
Was wir tun?
Das EBIPREP-Projekt wird von einer interdisziplinären Forschungsgruppe durchgeführt, die sich aus Chemikern, Prozessingenieuren, Bioprozessingenieuren und Physikern zusammensetzt. Ziel ist es, neue Lösungen für den Einsatz von Hackschnitzeln und Holzpresssaft zu entwickeln, die durch ein innovatives mechanisches Trocknungsverfahren gewonnen werden. Neben der Holzvergasung und katalytischen Reinigung des Holzgases ist der Einsatz von Holzpresssaft in Biogasanlagen und in biotechnologischen Produktionsprozessen von Wertstoffen vorgesehen. Holzhackschnitzel werden thermisch vergast. Es werden Online-Sensoren entwickelt, um die relevanten Parameter der stabilisierten und optimierten Einzelprozesse auszuwerten. Die Verknüpfung von thermischen und biotechnologischer Konversionsprozessen könnte dazu beitragen, die Dimension von Biogasreaktoren erheblich zu reduzieren. Diese Tatsache wird folglich zu einer spürbaren Kostensenkung führen.
Ziele des EBIPREP-Projekts
• die Vorteile der thermischen und biologischen Umwandlung von Biomasse zu kombinieren;
• Entwicklung eines Verfahrens zur Reduzierung von Schadstoffemissionen mit innovativen Sensoren und katalytische Behandlung von Synthesegasen;
• nachhaltige Produktion biotechnologischer wertvoller Produkte
• wirtschaftliche und ökologische Analyse des Gesamtprozesses im Vergleich zu den Einzelprozessen
• Einsatz von Prozessabwässern zur Erzeugung regenerativer Energie oder biotechnologischer Wertstoffe
• Erwerb neuer Kenntnisse auf dem Gebiet der Rückgewinnungstechnik von Rückständen
• und Energieerzeugung;
• Erweiterung neuer Anwendungsfelder für innovative Sensoren und Keramik
• Schäume für Katalysatoren;
• Senkung der Kosten für die Biogasproduktion
Im geplanten Übersichtsvortrag werden die vernetzten Strukturen des Projekts EBIPREP und deren zentralen Ergebnisse vorgestellt.
Sustainable design of equipment for process intensification requires a comprehensive and correct identification of relevant stakeholder requirements, design problems and tasks crucial for innovation success. Combining the principles of the Quality Function Deployment with the Importance-Satisfaction Analysis and Contradiction Analysis of requirements gives an opportunity to define a proper process innovation strategy more reliably and to develop an optimal process intensification technology with less secondary engineering and ecological problems.
Short-term load forecasting (STLF) has been playing a key role in the electricity sector for several decades, due to the need for aligning energy generation with the demand and the financial risk connected with forecasting errors. Following the top-down approach, forecasts are calculated for aggregated load profiles, meaning the sum of singular loads from consumers belonging to a balancing group. Due to the emerging flexible loads, there is an increasing relevance for STLF of individual factories. These load profiles are typically more stochastic compared to aggregated ones, which imposes new requirements to forecasting methods and tools with a bottom-up approach. The increasing digitalization in industry with enhanced data availability as well as smart metering are enablers for improved load forecasts. There is a need for STLF tools processing live data with a high temporal resolution in the minute range. Furthermore, behin-the-meter (BTM) data from various sources like submetering and production planning data should be integrated in the models. In this case, STLF is becoming a big data problem so that machine learning (ML) methods are required. The research project “GaIN” investigates the improvement of the STLF quality of an energy utility using BTM data and innovative ML models. This paper describes the project scope, proposes a detailed definition for a benchmark and evaluates the readiness of existing STLF methods to fulfil the described requirements as a reviewing paper.
The review highlights that recent STLF investigations focus on ML methods. Especially hybrid models gain more and more importance. ML can outperform classical methods in terms of automation degree and forecasting accuracy. Nevertheless, the potential for improving forecasting accuracy by the use of ML models depends on the underlying data and the types of input variables. The described methods in the analyzed publications only partially fulfil the tool requirements for STLF on company level. There is still a need to develop suitable ML methods to integrate the expanded data base in order to improve load forecasts on company level.
Plant oils may be used as a sustainable, nearly CO2neutral fuel for diesel engines. This work investigates experimentally the particulate and gaseous emissions of diesel engines fuelled with different non-esterified, pure plant oils. The data are collected from three engines: a) Common rail 1.7 liter passenger car engine from Opel AG b) 12.8 liter truck engine from VOLVO c) Truck engine from MAN AG.
The emissions of the MAN engine have been used to perform AMES tests to analyze possible health impacts of plant oil operation. Finally, all emission results with plant oils have been compared to traditional gas oils.
Non-esterified plant oils gain ecological and economical importance, particularly in the EU where it is intended to increase the share of renewable energies. Plant oils do not require any chemical treatment so do not cause secondary pollution. The importance of plant oil will increase in Germany for mobile and stationary applications. The generation co-generation of heat and power is subsidized by the German “Erneuerbares Energiegesetz” and the “Kraft-Wärme-Kopplungsgesetz” when renewable fuels are used such as plant oils..
Plant oils have a much higher viscosity than conventional gas oil. It is mandatory to decrease the oil viscosity by heating prior to injection to assure proper injection and to avoid engine damage due to coke formation in the combustion chamber and at the injection nozzle. The German quality standard of Weihenstephan (RK-Qualitätsstandard 05/2000) for rape seed oil should be followed for use as diesel fuel. The chemical composition of plant oils is appreciably different in comparison to diesel fuels derived from mineral oils suggesting also different emission behavior.
Vorgestellt wird ein Konzept zur biologischen Methanisierung von Wasserstoff direkt in Biogasreaktoren, mit dem durch Membranbegasung der Methangehalt des Biogases auf > 96 % erhöht werden kann. Essentiell zum Erreichen solch hoher Methanwerte sind die Einhaltung eines optimalen pH-Bereichs und die Vermeidung von H2-Akkumulation. Im Falle einer Limitierung der Methanbildungsrate durch den eigentlichen anaeroben Abbauprozess der Biomasse ist auch eine externe Zufuhr von CO2 zur weiteren Methanbildung denkbar. Das Verfahren soll weiter optimiert und in einem von der Deutschen Bundesstiftung Umwelt geförderten Projekt in der Biogasanlage einer regionalen Käserei in der Praxis getestet werden. Die hier angestrebte Kombination aus dezentraler Abfallverwertung und Eigenenergieerzeugung eines lebensmittelverarbeitenden Betriebs unter Einbindung in ein intelligentes Erneuerbare Energien - Konzept soll einen zusätzlichen Mehrwert liefern.
Process engineering industries are now facing growing economic pressure and societies' demands to improve their production technologies and equipment, making them more efficient and environmentally friendly. However unexpected additional technical and ecological drawbacks may appear as negative side effects of the new environmentally-friendly technologies. Thus, in their efforts to intensify upstream and downstream processes, industrial companies require a systematic aid to avoid compromising of ecological impact. The paper conceptualises a comprehensive approach for eco-innovation and eco- design in process engineering. The approach combines the advantages of Process Intensification as Knowledge-Based Engineering (KBE), inventive tools of Knowledge-Based Innovation (KBI), and main principles and best-practices of Eco-Design and Sustainable Manufacturing. It includes a correlation matrix for identification of eco-engineering contradictions and a process mapping technique for problem definition, database of Process Intensification methods and equipment, as well as a set of strongest inventive operators for eco-ideation.
As engineering graduates and specialists frequently lack the advanced skills and knowledge required to run eco-innovation systematically, the paper proposes a new teaching method and appropriate learning materials in the field of eco-innovation and evaluates the learning experience and outcomes. This programme is aimed at strengthening student’s skills and motivation to identify and creatively overcome secondary eco-contradictions in case if additional environmental problems appears as negative side effects of eco-friendly solutions.
Based on a literature analysis and own investigations, authors propose to introduce a manageable number of eco-innovation tools into a standard one-semester design course in process engineering with particular focus on the identification of eco-problems in existing technologies, selection of the appropriate new process intensification technologies (knowledge-based engineering), and systematic ideation and problem solving (knowledge-based innovation and invention).
The proposed educational approach equips students with the advanced knowledge, skills and competences in the field of eco-innovation. Analysis of the student’s work allows one to recommend simple-to-use tools for a fast application in process engineering, such as process mapping, database of eco-friendly process intensification technologies, and up to 20 strongest inventive operators for solving of environmental problems. For the majority of students in the survey, even the small workload has strengthened their self-confidence and skills in eco-innovation
The development of new processes and materials for additive manufacturing is currently progressing rapidly. In order to use the advantages of additive manufacturing, however, product development and design must also be adapted to these new processes. Therefore it is suitable to use structural optimization. To achieve the best results in lightweight design, it is important to have an approach that reduces the volume in the unloaded regions and considers the restrictions and characteristics of the additive manufacturing process. In this contribution, a case study using a humanoid robot is presented. Thus, the pelvis module of a humanoid robot is optimized regarding its weight and stiffness. Furthermore, an integrated design is implemented in order to reduce the number of parts and the screw connections. The manufacturing uses a new aluminum-based material that has been specially developed for use in additive manufacturing and lightweight construction. For the additive manufacturing by means of the Selective Laser Melting (SLM) process, different restrictions and the assembly concepts of the humanoid robot have to be taken into account. These restrictions have to be considered in the setting of the individual parameters and target functions of the structural optimization. As a result, a framework is presented that shows the steps of the redesign and the optimization of the pelvis module. In order to achieve high accuracy with the product, the redesign of the pelvis module is demonstrated with regard to mechanical and thermal postprocessing. Finally, the redesigned part and the different assembly concepts are compared to analyze the economic and technical effects of the optimization.
Die Studienanfänger in den technischen Studiengängen der Hochschulen für angewandte Wissenschaften haben nicht nur in Mathematik sondern auch in Physik sehr unterschiedliche Vorkenntnisse. Obwohl diese Fächer für das grundlegende Verständnis technischer Vorgänge von großer Bedeutung sind, kann die Ausbildung in diesen Bereichen angesichts der begrenzten dafür im Verlauf des Studiums zur Verfügung stehenden Zeitfenster nicht bei Null anfangen. Für Mathematik wurde daher von der Arbeitsgruppe cosh ein Mindestanforderungskatalog zusammengestellt und 2014 veröffentlicht. Er beschreibt Kenntnisse und Fertigkeiten, die Studienanfänger zur erfolgreichen Aufnahme eines WiMINT-Studiums (Wirtschaft, Mathematik, Informatik, Naturwissenschaft, Technik) an einer Hochschule benötigen. Inzwischen hat sich nun eine Arbeitsgruppe von Physikerinnen und Physikern an Hochschulen in Baden-Württemberg gebildet, deren Ziel es ist, einen analogen Mindestanforderungskatalog für den Bereich Physik zu erstellen. Hier wird der aktuell erreichte Stand der Arbeiten vorgestellt.
As part of the design education at Offenburg University, the teaching in technical documentation is continuously optimised. In this study, numerous mechanical engineering students, ages 19 to 29, are observed using the eye tracking technology and a video camera while performing various design exercises. The aim of the study is to enhance the students’ ability to read, understand and analyse complex engineering drawings. In one experiment, the students are asked to perform the “cube perspective test” after Stumpf and Fay to assess their ability for mental rotation as part of spatial visualization ability. Furthermore, the students are asked to prepare and give micro presentations on a topic related to their studies. Students have a maximum of 100 s time for these presentations. Thus, they can practise presenting important information in a short amount of time, show their rhetorical skills and demonstrate their acquisition of basic knowledge. During the presentation, the eye movement of a few selected students is recorded to analyse their information acquisition. In a further test, the students’ eye movements are analysed while reading an engineering drawing that consists of multiple views. All the spatial connections have to be included based on the different component views. Including these and their acquired knowledge, the students are asked to identify the correct representation of a component view. Furthermore the subjects are describing the function of an assembly, a parallel gripper and then they are to mentally disassemble the assembly to replace a damaged cylindrical pin. Simultaneously, they are filmed using a video camera to see which terms the students use for the individual technical terms. The evaluation of the eye movements shows that the increasing digitalisation of society and the use of electronic devices in everyday life lead to fast and only selective perceptual behaviour and that students feel insecure when dealing with technical drawings. The analysis of the videos shows a mostly non-technical and inaccurate manner of expression and a poor use of technical terms. The transferability of the achieved results to other technical tasks is part of further investigations.
Thin-layer chromatography is a rapid and reliable working method for quantification of mycotoxins which is suitable for checking EC legislation aflatoxin limits for dried figs without an RP-18 pre-column cleaning step. We describe normal-phase chromatography on silica gel plates with 2.4:0.05:0.1:0.05 ( v/v ) methyl t -butyl ether-water-methanol-cyclohexane as mobile phase and reversed-phase chromatography on RP-18 plates with methanol-4% aqueous ZnSO 4 solution-ethyl methyl ketone 15:15:3 ( v/v ) as mobile phase. Sample pretreatment was by modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged, Safe) extraction with tetrahydrofuran or acetone. NaCl was used as QuEChERS salt. Response was a linear function of amount chromatographed in the ranges 3 to 100 pg per zone for aflatoxins B 2 and G 2 , 10 to 350 pg per zone for the aflatoxins B 1 and G 1 , and 0.25 to 2.5 ng per zone for ochratoxin A. Quantification limits for the aflatoxins were between 13 and 35 pg per zone (equivalent to 1.5 and 2.4 ppb, taking the pre-treatment procedure into account). Ochratoxin A was detectable with a limit of quantification of 970 pg per zone, corresponding to 56 ppb in the sample. Normal phase and RP-18 separations work rapidly, reliably, and at low cost. They are also suitable for checking the content of the mycotoxins patulin, penicillic acid, zearalenone, and deoxynivalenol.
The identification and quantification of compounds in the gas phase becomes of increasing interest in the context of environmental protection, as well as in the analytical field. In this respect, the high extinction coefficients of vapours and gases in the ultraviolet wavelength region allow a very sensitive measurement system. In addition, the increased performance of the components necessary for setting up a measurement system, such as fibres, light sources and detectors has been improved. In particular the light sources and detectors offer improved stability, and the deep UV performance and solarisation resistance of fused silica fibres allow have been significantly optimized in the past years. Therefore a compact and reliable detection system with high measuring accuracy is developed. Within this paper possible applications of the system under development and recent results will be discussed.
The identification and quantification of compounds in the gas phase becomes of increasing interest in the context of environmental protection, as well as in the analytical field. In this respect, the high extinction coefficients of vapours and gases in the ultraviolet wavelength region allow a very sensitive measurement system. In addition, the increased performance of the components necessary for setting up a measurement system, such as fibres, light sources and detectors has been improved. In particular the light sources and detectors offer improved stability, and the deep UV performance and solarisation resistance of fused silica fibres allow have been significantly optimized in the past years. Therefore a compact and reliable detection system with high measuring accuracy is developed. Within this paper possible applications of the system under development and recent results will be discussed.
Modelling detailed chemistry in lithium-ion batteries: Insight into performance, ageing and safety
(2018)
Colored glass products with various printing technologies are becoming more important in industry. The aim is to achieve individual solution in a very short delivery time. Conventional thermal treatment of burning glasses in oven for tempered color printing has predominant issues with high time consumption, energy consumption and manufacturing cost. It requires alternative process development.
This paper proposes laser process to overcome issues in conventional treatment with the latest results of tempering colored glass. Samples have been analyzed with the scanning electron microscope (SEM). Two different laser systems have been applied and the glass has been printed with black paste.
Economic growth and ecological problems have pushed industries to switch to eco-friendly technologies. However, environmental impact is still often neglected since production efficiency remains the main concern. Patent analysis in the field of process engineering shows that, on the one hand, some eco-issues appear as secondary problems of the new technologies, and on the other hand, eco-friendly solutions often show lower efficiency or performance capability. The study categorizes typical environmental problems and eco-contradictions in the field of process engineering involving solids handling and identifies underlying inventive principles that have a higher value for environmental innovation. Finally, 42 eco-innovation methods adapting TRIZ are chronologically presented and discussed.
Accelerated transformation of the society and industry through digi-talization, artificial intelligence and other emerging technologies has intensified the need for university graduates that are capable of rapidly finding breakthrough solutions to complex problems, and can successfully implement innovation con-cepts. However, there are only few universities making significant efforts to com-prehensively incorporate creative and systematic tools of TRIZ (theory of in-ventive problem solving) and KBI (knowledge-based innovation) into their de-gree structure. Engineering curricula offer little room for enhancing creativity and inventiveness by means of discipline‐specific subjects. Moreover, many ed-ucators mistakenly believe that students are either inherently creative, or will in-evitably obtain adequate problem-solving skills as a result of their university study. This paper discusses challenges of intelligent integration of TRIZ and KBI into university curricula. It advocates the need for development of standard guidelines and best-practice recommendations in order to facilitate sustainable education of ambitious, talented, and inventive specialists. Reflections of educa-tors that teach TRIZ and KBI to students from mechanical, electrical, process engineering, and business administration are presented.
The comprehensive assessment method includes 80 innovation performance parameters and 10 key indicators of innovation capability, such as innovation process performance, innovating system performance, market and customer orientation, technology orientation, creativity, leadership, communication and knowledge management, risk and cost management, innovative climate, and innovation competences. The cross-industry study identifies parameters critical for innovation success and reveals different innovation performance patterns in companies.
CONTEXT
The paper addresses the needs of medium and small businesses regarding qualification of R&D specialists in the interdisciplinary cross-industry innovation, which promises a considerable reduction of investments and R&D expenditures. The cross-industry innovation is commonly understood as identification of analogies and transfer of technologies, processes, technical solutions, working principles or business models between industrial sectors. However, engineering graduates and specialists frequently lack the advanced skills and knowledge required to run interdisciplinary innovation across the industry boundaries.
PURPOSE
The study compares the efficiency of the cross-industry innovation methods in one semester project-oriented course. It identifies the individual challenges and preferred working techniques of the students with different prior knowledge, sets of experiences, and cultural contexts, which require attention by engineering educators.
APPROACH
Two parallel one-semester courses were offered to the mechanical and process engineering students enrolled in bachelor’s and master’s degree programs at the faculty of mechanical and process engineering. The students from different years of study were working in 12 teams of 3…6 persons each on different innovation projects, spending two hours a week in the classroom and additionally on average two hours weekly on their project research. Students' feedback and self-assessments concerning gained skills, efficiency of learned tools and intermediate findings were documented, analysed, and discussed regularly along the course.
RESULTS
Analysis of numerous student projects allows to compare and to select the tools most appropriate for finding cross-industry solutions, such as thinking in analogies, web monitoring, function-oriented search, databases of technological effects and processes, special creativity techniques and others. The utilization of learned skills in practical innovation work strengthens the motivation of students and enhances their entrepreneurial competences. Suggested learning course and given recommendations help facilitate sustainable education of ambitious specialists.
CONCLUSIONS
The structured cross-industry innovation can be successfully run as a systematic process and learned in one semester course. The choice of the preferred working teqniques made by the students is affected by their prior knowledge in science, practical experience, and cultural contexts. Major outcomes of the students’ innovation projects such as feasibility, novelty and customer value of the concepts are primarily influenced by students’ engineering design skills, prior knowledge of the technologies, and industrial or business experience.
Freiwillige Fachtutorien erreichen aus unterschiedlichen Gründen nicht alle Studierenden. Allein der subjektive Eindruck, dass zu wenige Ressourcen seitens der Hochschule (Übungsräume, studentische Tutoren, lückenlose Stundenplanpassung) oder der Studierenden (Zeit, Motivation) zur Verfügung stünden, führt zu Absenzen bei freiwilligen Präsenztutorien. Um die empfundenen und realen Begrenzungen dieser Veranstaltungen zu verringern, wurden für den Studiengang Maschinenbau die Musterlösungen der Übungsaufgaben Physik und Mathematik in Form von Videoclips erstellt und über die Lernplattform Moodle für alle Studierende des Semesters bereitgestellt. Die Clips beziehen sich jeweils auf eine Teilaufgabe und besitzen die Länge eines typischen Youtube-Tutorials. In etwa 5 Minuten bieten sie dem Zuschauer einen Lösungsweg zu den jeweiligen Übungsaufgaben. Die Studierenden können die Clips alternativ oder ergänzend zur Präsenzveranstaltung nutzen. Bei der Erstellung der Clips wurde auf den Einsatz von Spezialeffekten wie Animationen etc. zugunsten einer effizienten Produktion verzichtet, so dass eine einzelne Lehrperson pro Stunde etwa 10 bis 20 Minuten Videoclips aufzeichnen kann. Die Auswertung der Zugriffszahlen auf die Clip-Dateien ermöglicht eine aufgabengenaue Ermittlung der aktiven Nutzer. Im Betrag wird eine vorläufige Auswertung der Teilnehmerzahl und der Korrelation zwischen Klausurergebnis und Nutzungsgrad präsentiert.
VDI Standard 4521: Status
(2016)
VDI Guideline 4521 Part 1: “Inventive problem solving with TRIZ: Part 1 – Fundamentals and definitions” has been published on 2015-04-01. The standard will sharpen the image of TRIZ, facilitate cooperation, and support studying and teaching. It is not a textbook but concisely summarizes basic assumptions of TRIZ and its terminology. It gives an overview on specific methods and tools which will be described in the following parts.
Sustainable Aspects force a building manager to continuous observation of actual states and developments concerning building use, energy and media flows.In the presented approach a communication structure was built up to use different software applications and tools in order to optimize the operation of the building.
We herein present a topology design method based on local optimality criteria which has been implemented in an open source Navier-Stokes solver for turbulent flows. Our method aims for the fast generation of geometry proposals in the early conceptual phase. To the best of our knowledge, this is the first local criteria approach utilizing a wall function turbulence model in order to consider turbulent flows. In order to allow for the growth as well as the shrinkage, or even the formation or disappearance of structural features, a topological approach is chosen. By introducing a volume fraction parameter, we distinguish between fluid and solid properties in each control volume. The fluid-solid interface is represented by an immersed boundary method using a piecewise linear surface reconstruction.
Process engineering focuses on the design, operation, control and optimization of chemical, physical and biological processes and has applications in many industries. Process Intensification is the key development approach in the modern process engineering. The proposed Advanced Innovation Design Approach (AIDA) combines the holistic innovation process with the systematic analytical and problem solving tools of the theory of inventive problem solving TRIZ. The present paper conceptualizes the AIDA application in the field of process engineering and especially in combination with the Process Intensification. It defines the AIDA innovation algorithm for process engineering and describes process mapping, problem ranking, and concept design techniques. The approach has been validated in several industrial case studies. The presented research work is a part of the European project “Intensified by Design® platform for the intensification of processes involving solids handling”.
The collection of selected papers of the TRIZ Future Conference 2017 is in open access and is included to the Innovator, the journal of the European TRIZ Assocation.
The paper is addressing the needs of the universities regarding qualification of students as future R&D specialists in efficient techniques for successfully running innovation process. In comparison with the engineers, the students often demonstrate lower motivation in learning systematic inventive techniques, like for example TRIZ methodology, and prefer random brainstorming for idea generation. The quality of obtained solutions also depends on the level of completeness of the problem analysis, which is more complex and time consuming in the case of interdisciplinary systems. The paper briefly describes one-semester-course of 60 hours in new product development with the Advanced Innovation Design Approach and TRIZ methodology, in which a typical industrial innovation process for one selected interdisciplinary mechatronic product is modelled.
Viele hochbeanspruchte Bauteile müssen zur Erfüllung ihres konstruktiven Zwecks mit Durchdringungskerben versehen werden. Infolge der gegenseitigen Wechselwirkung gelten für die Kerbwirkung dieser Art von Mehrfachkerben andere Gesetzmäßigkeiten als bei Einzelkerben. Die Weiterentwicklung der Lehre von der Tragfähigkeitsberechnung höchstbeanspruchter Maschinenelemente macht es notwendig, sich mit der Durchdringungskerbwirkung eingehend zu befassen. Thum und Svenson [1] entwickelten im Jahr 1949 ein Näherungsverfahren zur Abschätzung der Formzahl an einem zugbelasteten Stab mit Durchdringungskerben. In vielen Lehrbüchern findet dieses Verfahren Anwendung. Aus heutiger Sicht erscheint die Eignung der aus diesem Ansatz erzielten Ergebnisse als dringend überprüfungswürdig. Das thum’sche Verfahren wird unter die Lupe genommen. Der hier vorliegende Beitrag präsentiert mit Hilfe der Finiten-Elemente-Methode (FEM) neue Untersuchungsergebnisse an zugbeanspruchten Stäben mit Halbkreisnut und überlagerter Querbohrung. Diese ergaben, dass die Berechnung nach [1] Lücken aufweist. Ihr Ansatz stellt für den heutigen Entwicklungsstand eine mit zu großen Abweichungen behaftete Näherungshypothese dar.
For the RoboCup Soccer AdultSize League the humanoid robot Sweaty uses a single fully convolutional neural network to detect and localize the ball, opponents and other features on the field of play. This neural network can be trained from scratch in a few hours and is able to perform in real-time within the constraints of computational resources available on the robot. The time it takes to precess an image is approximately 11 ms. Balls and goal posts are recalled in 99 % of all cases (94.5 % for all objects) accompanied by a false detection rate of 1.2 % (5.2 % for all). The object detection and localization helped Sweaty to become finalist for the RoboCup 2017 in Nagoya.
One of the challenges in humanoid robotics is motion control. Interacting with humans requires impedance control algorithms, as well as tackling the problem of the closed kinematic chains which occur when both feet touch the ground. However, pure impedance control for totally autonomous robots is difficult to realize, as this algorithm needs very precise sensors for force and speed of the actuated parts, as well as very high sampling rates for the controller input signals. Both requirements lead to a complex and heavy weight design, which makes up for heavy machines unusable in RoboCup Soccer competitions.
A lightweight motor controller was developed that can be used for admittance and impedance control as well as for model predictive control algorithms to further improve the gait of the robot.
Simulation-based degradation assessment of lithium-ion batteries in a hybrid electric vehicle
(2017)
The insufficient lifetime of lithium-ion batteries is one of the major cost driver for mobile applications. The battery pack in vehicles is one of the most expensive single components that practically must be excluded from premature replacement (i.e., before the life span of the other components end). Battery degradation is a complex physicochemical process that strongly depends on operating condition and environment. We present a simulation-based analysis of lithium-ion battery degradation during operation with a standard PHEV test cycle. We use detailed multiphysics (extended Newman-type) cell models that allow the assessment of local electrochemical potential, species and temperature distributions as driving forces for degradation, including solid electrolyte interphase (SEI) formation [1]. Fig. 1 shows an exemplary test cycle and the predicted resulting spatially-averaged SEI formation rate. We apply a time-upscaling approach to extrapolate the degradation analysis over long time scales, keeping physical accuracy while allowing end-of-life assessment [2]. Results are presented for lithium-ion battery cells with graphite/LFP chemistry. The behavior of these cells in terms of degradation propensity, performance, state of charge and other internal states is predicted during long-term cycling. State of health (SOH) is quantified as capacity fade and internal resistance increase as function of operation time.
Practical bottlenecks associated with commercialization of Lithium-air cells include capacity limitation and low cycling efficiency. The origin of such losses can be traced to complex electrochemical side reactions and reactant mass transport losses[1]. The efforts to minimize such losses include exploration of various electrolytes with additives[2], and cell component geometry and material design. Given the wide range of options for such materials, it is almost impractical to experimentally setup and characterize all those cells. Consequently, modeling and simulation studies are efficient alternatives to analyze spatially and temporally resolved cell behavior for various combinations of materials[3]. In this study, with the help of a two-dimensional multi physics model, we have focused on the effect of electrode and electrolyte interaction (electrochemistry), choice of electrolyte (species transport), and electrode geometry (electrode design) on the performance of a lithium-air button cell. Figure1a shows the schematics of the 2D axisymmetric computational domain. A comparative analysis of five different electrolytes was performed while focusing on the 2D distribution of local current density and the concentration of electro-chemically active species in the cell, that is, O2and Li+. Using two different cathode configurations, namely, flooded electrode and gas diffusion electrode (GDE)[4] at different cathode thickness, the effect of cell geometry and electrolyte saturation on cell performance was explored. Further, a detailed discussion on electrode volume utilization (cf. Figure1b) is presented via changes in the active volume of cathode that produces 90% of the total current with the cell current density for different combinations of electrolyte saturations and cathode thickness.
Simulation-based degradation assessment of lithium-ion batteries in a hybrid electric vehicle
(2017)
Muli-scale thermos-electrochemical modelling of aging mechanisms in an LFP/graphite lithium-ion cell
(2017)