Refine
Year of publication
Document Type
- Article (reviewed) (35)
- Conference Proceeding (14)
- Contribution to a Periodical (6)
- Master's Thesis (5)
- Report (4)
- Bachelor Thesis (2)
- Doctoral Thesis (1)
- Article (unreviewed) (1)
Conference Type
- Konferenzartikel (14)
Has Fulltext
- yes (68) (remove)
Keywords
- lithium-ion battery (5)
- Modeling (3)
- lithium-ion batteries (3)
- Energy System Analysis (2)
- Fotovoltaik (2)
- Gebäudeklimatisierung (2)
- Sanierung (2)
- Simulation (2)
- Wärmepumpe (2)
- blend electrode (2)
Institute
- INES - Institut für nachhaltige Energiesysteme (68) (remove)
Open Access
- Open Access (61)
- Gold (11)
- Diamond (10)
- Bronze (5)
- Grün (5)
- Closed Access (4)
- Closed (3)
- Hybrid (3)
This thesis explores the feasibility and optimization of a solar-thermal sorption system mainly designed to provide cooling but also capable of heating functionalities. Through the development of a black-box model using Python programming, the study delves into the system's performance under various operation modes. Simulation results reveal the effectiveness of adaptive control strategies and pre-heating stages in optimizing efficiency, particularly in cooling modes. In heating assessments, superior performance is observed when utilizing the outdoor coil as the heat source for the heat pump. Challenges related to operational temperature bands are addressed, proposing parallel connections of the heat pump and outdoor coil to enhance performance. Future research directions include refining regression models and incorporating real-time measurement data for improved accuracy, as well as extending simulation duration for comprehensive evaluations. This study contributes valuable insights into the system’s capabilities and applications, laying the groundwork for advancements in heat-driven integrated sustainable energy systems.
This paper provides a comprehensive overview of approaches to the determination of isocontours and isosurfaces from given data sets. Different algorithms are reported in the literature for this purpose, which originate from various application areas, such as computer graphics or medical imaging procedures. In all these applications, the challenge is to extract surfaces with a specific isovalue from a given characteristic, so called isosurfaces. These different application areas have given rise to solution approaches that all solve the problem of isocontouring in their own way. Based on the literature, the following four dominant methods can be identified: the marching cubes algorithms, the tessellation-based algorithms, the surface nets algorithms and the ray tracing algorithms. With regard to their application, it can be seen that the methods are mainly used in the fields of medical imaging, computer graphics and the visualization of simulation results. In our work, we provide a broad and compact overview of the common methods that are currently used in terms of isocontouring with respect to certain criteria and their individual limitations. In this context, we discuss the individual methods and identify possible future research directions in the field of isocontouring.
Batteries typically consist of multiple individual cells connected in series. Here we demonstrate single-cell state of charge (SOC) and state of health (SOH) diagnosis in a 24 V class lithium-ion battery. To this goal, we introduce and apply a novel, highly efficient algorithm based on a voltage-controlled model (VCM). The battery, consisting of eight single cells, is cycled over a duration of five months under a simple cycling protocol between 20 % and 100 % SOC. The cell-to-cell standard deviations obtained with the novel algorithm were 1.25 SOC-% and 1.07 SOH-% at beginning of cycling. A cell-averaged capacity loss of 9.9 % after five months cycling was observed. While the accuracy of single-cell SOC estimation was limited (probably owed to the flat voltage characteristics of the lithium iron phosphate, LFP, chemistry investigated here), single-cell SOH estimation showed a high accuracy (2.09 SOH-% mean absolute error compared to laboratory reference tests). Because the algorithm does not require observers, filters, or neural networks, it is computationally very efficient (three seconds analysis time for the complete data set consisting of eight cells with approx. 780.000 measurement points per cell).
Variable refrigerant flow (VRF) and variable air volume (VAV) systems are considered among the best heating, ventilation, and air conditioning systems (HVAC) thanks to their ability to provide cooling and heating in different thermal zones of the same building. As well as their ability to recover the heat rejected from spaces requiring cooling and reuse it to heat another space. Nevertheless, at the same time, these systems are considered one of the most energy-consuming systems in the building. So, it is crucial to well size the system according to the building’s cooling and heating needs and the indoor temperature fluctuations. This study aims to compare these two energy systems by conducting an energy model simulation of a real building under a semi-arid climate for cooling and heating periods. The developed building energy model (BEM) was validated and calibrated using measured and simulated indoor air temperature and energy consumption data. The study aims to evaluate the effect of these HVAC systems on energy consumption and the indoor thermal comfort of the building. The numerical model was based on the Energy Plus simulation engine. The approach used in this paper has allowed us to reach significant quantitative energy saving along with a high level of indoor thermal comfort by using the VRF system compared to the VAV system. The findings prove that the VRF system provides 46.18% of the annual total heating energy savings and 6.14% of the annual cooling and ventilation energy savings compared to the VAV system.
Lithium-ion batteries exhibit slow voltage dynamics on the minute time scale that are usually associated with transport processes. We present a novel modelling approach toward these dynamics by combining physical and data-driven models into a Grey-box model. We use neural networks, in particular neural ordinary differential equations. The physical structure of the Grey-box model is borrowed from the Fickian diffusion law, where the transport domain is discretized using finite volumes. Within this physical structure, unknown parameters (diffusion coefficient, diffusion length, discretization) and dependencies (state of charge, lithium concentration) are replaced by neural networks and learnable parameters. We perform model-to-model comparisons, using as training data (a) a Fickian diffusion process, (b) a Warburg element, and (c) a resistor-capacitor circuit. Voltage dynamics during constant-current operation and pulse tests as well as electrochemical impedance spectra are simulated. The slow dynamics of all three physical models in the order of ten to 30 min are well captured by the Grey-box model, demonstrating the flexibility of the present approach.
This article presents the development, parameterization, and experimental validation of a pseudo-three-dimensional (P3D) multiphysics aging model of a 500 mAh high-energy lithium-ion pouch cell with graphite negative electrode and lithium nickel manganese cobalt oxide (NMC) positive electrode. This model includes electrochemical reactions for solid electrolyte interphase (SEI) formation at the graphite negative electrode, lithium plating, and SEI formation on plated lithium. The thermodynamics of the aging reactions are modeled depending on temperature and ion concentration and the reactions kinetics are described with an Arrhenius-type rate law. Good agreement of model predictions with galvanostatic charge/discharge measurements and electrochemical impedance spectroscopy is observed over a wide range of operating conditions. The model allows to quantify capacity loss due to cycling near beginning-of-life as function of operating conditions and the visualization of aging colormaps as function of both temperature and C-rate (0.05 to 2 C charge and discharge, −20 °C to 60 °C). The model predictions are also qualitatively verified through voltage relaxation, cell expansion and cell cycling measurements. Based on this full model, six different aging indicators for determination of the limits of fast charging are derived from post-processing simulations of a reduced, pseudo-two-dimensional isothermal model without aging mechanisms. The most successful aging indicator, compared to results from the full model, is based on combined lithium plating and SEI kinetics calculated from battery states available in the reduced model. This methodology is applicable to standard pseudo-two-dimensional models available today both commercially and as open source.
Predictive control has great potential in the home energy management domain. However, such controls need reliable predictions of the system dynamics as well as energy consumption and generation, and the actual implementation in the real system is associated with many challenges. This paper presents the implementation of predictive controls for a heat pump with thermal storage in a real single-family house with a photovoltaic rooftop system. The predictive controls make use of a novel cloud camera-based short-term solar energy prediction and an intraday prediction system that includes additional data sources. In addition, machine learning methods were used to model the dynamics of the heating system and predict loads using extensive measured data. The results of the real and simulated operation will be presented.
Photovoltaic-heat pump (PV-HP) combinations with battery and energy management systems are becoming increasingly popular due to their ability to increase the autarchy and utilization of self-generated PV electricity. This trend is driven by the ongoing electrification of the heating sector and the growing disparity between growing electricity costs and reducing feed-in tariffs in Germany. Smart control strategies can be employed to control and optimize the heat pump operation to achieve higher self-consumption of PV electricity. This work presents the evaluation results of a smart-grid ready controlled PV-HP-battery system in a single-family household in Germany, using 1-minute-high-resolution field measurement data. Within 12 months evaluation period, a self-consumption of 43% was determined. The solar fraction of the HP amounts to 36%, enabled also due to higher set temperatures for space heating and domestic hot water production. Accordingly, the SPF decreases by 4.0% the space heating and by 5.7% in the domestic hot water mode. The combined seasonal performance factor for the heat pump system increases from 4.2 to 6.7, when only considering the electricity taken from the grid and disregarding the locally generated electricity supplied from photovoltaic and battery units.
Photovoltaic thermal (PVT) technology has been drawing attention recently. Electrification of the heating sector with heat pumps run by carbon-free electricity sources like photovoltaics is setting the ground for the interest. This article gives insight into PVT technologies and collector designs according to application and operating temperatures. For most conventional designs, examples like prototypes from Research & Development projects are presented. In addition, commercial products are listed along these categories, and the influence on the gross thermal and electrical yield is depicted based on Solar Keymark certification data. The process of certification is presented in a comprehensive way, showing current limitations, giving an outlook on the most recent approach for enhanced procedures and specifications. Finally, different system layouts are presented, and examples from installations combined with a heat pump are given with their specific performances. Real performance data of several PVT installations are compared to conventional heat pump systems. The identified seasonal performance factors are in a range from 3.4 to 4.2 and in between air source and ground source heat pumps. Continuous monitoring and derived data are enablers to discover the decisive influence of the system layout and dimensioning on performance indicators like, for example, operating temperatures over the year.
With the function RooTri(), we present a simple and robust calculation method for the approximation of the intersection points of a scalar field given as an unstructured point cloud with a plane oriented arbitrarily in space. The point cloud is approximated to a surface consisting of triangles whose edges are used for computing the intersection points. The function contourc() of Matlab is taken as a reference. Our experiments show that the function contourc() produces outliers that deviate significantly from the defined nominal value, while the quality of the results produced by the function RooTri() increases with finer resolution of the examined grid.
Ziel der vorliegenden Arbeit ist das netzdienliche Betreiben einer Wärmepumpe. Um diese Netzdienlichkeit zu erreichen, wird ein modellprädiktiver Regler entwickelt und implementiert, dessen Ziel es ist die Stromkosten einer Wärmepumpe zu senken. Dazu werden die Variablen Stromkosten und ein simulierter Heizbetrieb betrachtet.
Die Entwicklung eines modellprädiktiven Reglers setzt zunächst eine Modellierung der Komponenten des Heizsystems voraus. Ebenfalls muss eine Kostenfunktion formuliert werden, die es zu minimieren gilt. In einem Optimierungsproblem werden die Modelle als Randbedingungen und die Kostenfunktion als Zielfunktion der Optimierung formuliert. Dazu müssen gewisse Vereinfachungen getroffen werden, um das Optimierungsproblem zuverlässig und ohne enormen Rechenaufwand in einer Regelungsschleife lösen zu können.
Nun wird das Optimierungsproblem mit externen Modulen verknüpft, die eine Kommunikation mit der realen Wärmepumpen, Strompreisprognosen und Wettervorhersagen ermöglichen. Der dabei entwickelte Algorithmus wird auf einem Raspberry Pi Einplatinencomputer gespeichert und dort in einem regelmäßigen Zeitintervall von 15 Minuten ausgeführt, um den Betrieb der Wärmepumpe zu regeln.
Schließlich wird der modellprädiktive Regler in Betrieb genommen. Anschließend kann der modellprädiktive Betrieb mit dem konventionellen Betrieb verglichen werden. Aus dem Vergleich wird deutlich, dass eine modellprädiktive Regelung tatsächlich die Netzdienlichkeit einer Wärmepumpe verbessern kann. Andererseits werden auch die Entwicklungspotentiale identifiziert.
This paper presents a framework for numerical building validation enhancement based on detailed building specifications from in-situ measurements and evidence-based validation assessment undertaken on a detached sustainable lightweight building in a semi-arid climate. The validation process has been undergone in a set of controlled experiments – a free-float period, and steady-state internal temperatures. The validation was conducted for a complete year with a 1-min time step for the hourly indoor temperature and the variable refrigerant flow (VRF) energy consumption. The initial baseline model was improved by three series of validation steps per three different field measurements including thermal transmittance, glazing thermal and optical properties, and airtightness. Then, the accurate and validated model was used for building energy efficiency assessment in 12 regions of Morocco. This study aims to assess the effect of accurate building characteristics values on the numerical model enhancement. The initial CV(RMSE) and NMBE have improved respectively from 14.58 % and −11.23 %–7.85 % and 1.86 % for the indoor temperature. Besides, from 31.17 % to 14.37 %–20.57 % and 9.77 % for energy consumption. The findings demonstrate that the lightweight construction with the use of a variable refrigerant flow system could be energy efficient in the southern regions of Morocco.
The variable refrigerant flow system is one of the best heating, ventilation, and air conditioning systems (HVAC) thanks to its ability to provide thermal comfort inside buildings. But, at the same time, these systems are considered one of the most energy-consuming systems in the building sector. Thus, it is crucial to well size the system according to the building’s cooling and heating needs and the indoor temperature fluctuations. Although many researchers have studied the optimization of the building energy performance considering heating or cooling needs, using air handling units, radiant floor heating, and direct expansion valves, few studies have considered the use of multi-objective optimization using only the thermostat setpoints of VRF systems for both cooling and heating needs. Thus, the main aim of this study is to conduct a sensitivity analysis and a multi-objective optimization strategy for a residential building containing a variable refrigerant flow system, to evaluate the effect of the building performance on energy consumption and improve the building energy efficiency. The numerical model was based on the EnergyPlus, jEPlus, and jEPlus+EA simulation engines. The approach used in this paper has allowed us to reach significant quantitative energy saving by varying the cooling and heating setpoints and scheduling scenarios. It should be stressed that this approach could be applied to several HVAC systems to reduce energy-building consumption.
Lithium-ion battery cells exhibit a complex and nonlinear coupling of thermal, electrochemical,and mechanical behavior. In order to increase insight into these processes, we report the development of a pseudo-three-dimensional (P3D) thermo-electro-mechanical model of a commercial lithium-ion pouch cell with graphite negative electrode and lithium nickel cobalt aluminum oxide/lithium cobalt oxide blend positive electrode. Nonlinear molar volumes of the active materials as function of lithium stoichiometry are taken from literature and implemented into the open-source software Cantera for convenient coupling to battery simulation codes. The model is parameterized and validated using electrical, thermal and thickness measurements over a wide range of C-rates from 0.05 C to 10 C. The combined experimental and simulated analyses show that thickness change during cycling is dominated by intercalation-induced swelling of graphite, while swelling of the two blend components partially cancel each other. At C-rates above 2 C, electrochemistry-induced temperature increase significantly contributes to cell swelling due to thermal expansion. The thickness changes are nonlinearly distributed over the thickness of the electrode pair due to gradients in the local lithiation, which may accelerate local degradation. Remaining discrepancies between simulation and experiment at high C-rates might be attributed to lithium plating, which is not considered in the model at present.
A balcony photovoltaic (PV) system, also known as a micro-PV system, is a small PV system consisting of one or two solar modules with an output of 100–600 Wp and a corresponding inverter that uses standard plugs to feed the renewable energy into the house grid. In the present study we demonstrate the integration of a commercial lithium-ion battery into a commercial micro-PV system. We firstly show simulations over one year with one second time resolution which we use to assess the influence of battery and PV size on self-consumption, self-sufficiency and the annual cost savings. We then develop and operate experimental setups using two different architectures for integrating the battery into the micro-PV system. In the passive hybrid architecture, the battery is in parallel electrical connection to the PV module. In the active hybrid architecture, an additional DC-DC converter is used. Both architectures include measures to avoid maximum power point tracking of the battery by the module inverter. Resulting PV/battery/inverter systems with 300 Wp PV and 555 Wh battery were tested in continuous operation over three days under real solar irradiance conditions. Both architectures were able to maintain stable operation and demonstrate the shift of PV energy from the day into the night. System efficiencies were observed comparable to a reference system without battery. This study therefore demonstrates the feasibility of both active and passive coupling architectures.
Electrochemical pressure impedance spectroscopy (EPIS) is an emerging tool for the diagnosis of polymer electrolyte membrane fuel cells (PEMFC). It is based on analyzing the frequency response of the cell voltage with respect to an excitation of the gas-phase pressure. Several experimental studies in the past decade have shown the complexity of EPIS signals, and so far there is no agreement on the interpretation of EPIS features. The present study contributes to shed light into the physicochemical origin of EPIS features, by using a combination of pseudo-two-dimensional modeling and analytical interpretation. Using static simulations, the contributions of cathode equilibrium potential, cathode overpotential, and membrane resistance on the quasi-static EPIS response are quantified. Using model reduction, the EPIS responses of individual dynamic processes are predicted and compared to the response of the full model. We show that the EPIS signal of the PEMFC studied here is dominated by the humidifier. The signal is further analyzed by using transfer functions between various internal cell states and the outlet pressure excitation. We show that the EPIS response of the humidifier is caused by an oscillating oxygen molar fraction due to an oscillating mass flow rate.
Electrochemical pressure impedance spectroscopy (EPIS) has received the attention of researchers as a method to study mass transport processes in polymer electrolyte mem-brane fuel cells (PEMFC). It is based on analyzing the cell voltage response to a harmonic excitation of the gas phase pressure in the frequency domain. Several experiments with a single-cell fuel cell have shown that the spectra contain information in the frequency range typical for mass transport processes and are sensitive to specific operating condi-tions and structural fuel cell parameters. To further benefit from the observed features, it is essential to identify why they occur, which to date has not yet been accomplished. The aim of the present work, therefore, is to identify causal links between internal processes and the corresponding EPIS features.
To this end, the study follows a model-based approach, which allows the analysis of inter-nal states that are not experimentally accessible. The PEMFC model is a pseudo-2D model, which connects the mass transport along the gas channel with the mass transport through the membrane electrode assembly. A modeling novelty is the consideration of the gas vol-ume inside the humidifier upstream the fuel cell inlet, which proves to be crucial for the reproduction of EPIS. The PEMFC model is parametrized to a 100 cm² single cell of the French project partner, who provided the experimental EPIS results reproduced and in-terpreted in the present study.
The simulated EPIS results show a good agreement with the experiments at current den-sities ≤ 0.4 A cm–2, where they allow a further analysis of the observed features. At the lowest excitation frequency of 1 mHz, the dynamic cell voltage response approaches the static pressure-voltage response. In the simulated frequency range between 1 mHz – 100 Hz, the cell voltage oscillation is found to strongly correlate with the partial pressure oscillation of oxygen, whereas the influence of the water pressure is limited to the low frequency region.
The two prominent EPIS features, namely the strong increase of the cell voltage oscillation and the increase of phase shift with frequency, can be traced back via the oxygen pressure to the oscillation of the inlet flow rate. The phenomenon of the oscillating inlet flow rate is a consequence of the pressure change of the gas phase inside the humidifier and in-creases with frequency. This important finding enables the interpretation of experimen-tally observed EPIS trends for a variation of operational and structural fuel cell parame-ters by tracing them back to the influence of the oscillating inlet flow rate.
The separate simulation of the time-dependent processes of the PEMFC model through model reduction shows their individual influence on EPIS. The sluggish process of the wa-ter uptake by the membrane is visible below 0.1 Hz, while the charge and discharge of the double layer becomes visible above 1 Hz. The gas transport through the gas diffusion layer is only visible above 100 Hz. The simulation of the gas transport through the gas channel
without consideration of the humidifier becomes visible above 1 Hz. With consideration of the humidifier the gas transport through the gas channel is visible throughout the fre-quency range. The strong similarity of the spectra considering the humidifier with the spectra of the full model setup shows the dominant influence of the humidifier on EPIS.
A promising observation is the change in the amplitude relationship between the cell volt-age and the oxygen partial pressure oscillation as a function of the oxygen concentration in the catalyst layer. At a frequency where the influence of oxygen pressure on the cell voltage is dominant, for example at 1 Hz, the amplitude of the cell voltage oscillation could be used to indirectly measure the oxygen concentration in the catalyst layer.
Das Konzept der Thermoaktiven Bauteilsysteme (TABS) zur Heizung und Kühlung von Gebäuden gewinnt aufgrund seiner Kompatibilität mit erneuerbaren Energiequellen an Popularität. Die Steuerung von TABS und somit auch die Gewährleistung eines behaglichen Raumklimas erweist sich allerdings aufgrund der hohen Systemträgheit als komplex. Kurzfristige Witterungsänderungen sorgen für unerwünschte Raumtemperaturänderungen, die nur langsam korrigiert werden können. Bei Nichtwohngebäuden wie dem Regionalen Innovationszentrum für Energie (RIZ Energie) in Offenburg wird dieser Umstand durch die unregelmäßige Gebäudenutzung zusätzlich erschwert, da innere Wärmelasten stark variieren und nicht vorhersehbar sind.
Konventionelle TABS-Steuerungen können Störgrößen im TABS-Betrieb nur bedingt und zeitverzögert berücksichtigen, weswegen eine dauerhafte Gewährleistung des thermischen Komforts im Gebäude oft nicht erreichbar ist – dies ist auch am RIZ Energie der Fall. Als Lösung dient der Einsatz prädiktiver Steuerungsalgorithmen, die Störgrößen prognostizieren und den TABS-Betrieb dementsprechend anpassen können.
Diese Arbeit überprüft das Potenzial von intelligenten TABS-Steuerungsalgorithmen für den Einsatz am RIZ Energie anhand der Umsetzung mit einem digitalen Zwilling des Gebäudes. Dabei konnte unter Verwendung der Algorithmen und Berücksichtigung von inneren und äußeren Störgrößen im TABS-Betrieb ein verbessertes Raumklima simuliert werden. Infolgedessen konnte zudem der digitale Zwilling optimiert werden.
Decarbonisation Strategies in Energy Systems Modelling: Biochar as a Carbon Capture Technology
(2022)
The energy system is changing since some years in order to achieve the climate goals from the Paris Agreement which wants to prevent an increase of the global temperature above 2 °C. Decarbonisation of the energy system has become for governments a big challenge and different strategies are being stablished. Germany has set greenhouse gas reduction limits for different years and keeps track of the improvement made yearly. The expansion of renewable energy systems (RES) together with decarbonisation technologies are a key factor to accomplish this objective.
This research is done to analyse the effect of introducing biochar, a decarbonisation technology, and study how it will affect the energy system. Pyrolysis is the process from which biochar is obtained and it is modelled in an open-source energy system model. A sensibility analysis is made in order to assess the effect of changing the biomass potential and the costs for pyrolysis.
The role of pyrolysis is analysed in the form of different future scenarios to evaluate the impact. The CO2 emission limits from the years 2030 and 2045 are considered to create the scenarios, as well as the integration of flexibility technologies. Four scenarios in total are assessed and the result from the sensibility analysis considering pyrolysis are always compared to the reference scenario, where pyrolysis is not considered.
Results show that pyrolysis has a bigger impact in the energy system when the CO2 limit is low. Biochar can be used to compensate the emissions from other conventional power plant and achieve an energy transition with lower costs. Furthermore, it was also found that pyrolysis can also reduce the need of flexibility. This study also shows that the biomass potential and the pyrolysis costs can affect a lot the behaviour of pyrolysis in the energy system.
Global energy demand is still on an increase during the last decade, with a lot of impact on the climate change due to the intensive use of conventional fossil-based fuels power plants to cover this demand. Most recently, leaders of the globe met in 2015 to come out with the Paris Agreement, stating that the countries will start to take a more responsible and effective behaviour toward the global warming and climate change issues. Many studies have discussed how the future energy system will look like with respecting the countries’ targets and limits of greenhouse gases and their CO2 emissions. However, these studies rarely discussed the industry sector in detail even though it is one of the major role players in the energy sector. Moreover, many studies have simulated and modelled the energy system with huge jumps of intervals in terms of years and environmental goals. In the first part of this study, a model will be developed for the German electrical grid with high spatial and temporal resolutions and different scenarios of it will be analysed meticulously on shorter periods (annual optimization), with different flexibilities and used technologies and degrees of innovations within each scenario. Moreover, the challenge in this research is to adequately map the diverse and different characteristics of the medium-sized industrial sector. In order to be able to take a first step in assessing the relevance of the industrial sector in Germany for climate protection goals, the industrial sector will be mapped in PyPSA-Eur (an open-source model data set of the European energy system at the level of the transmission network) by detailing the demand for different types of industry and assigning flexibilities to the industrial types. Synthetically generated load profiles of various industrial types are available. Flexibilities in the industrial sector are described by the project partner Fraunhofer IPA in the GaIN project and can be used. Using a scenario analysis, the development of the industrial sector and the use of flexibilities are then to be assessed quantitatively.