Refine
Document Type
- Conference Proceeding (11)
- Article (reviewed) (3)
- Contribution to a Periodical (2)
- Report (1)
Conference Type
- Konferenzartikel (10)
- Konferenz-Abstract (1)
Is part of the Bibliography
- yes (17)
Keywords
- energy harvesting (3)
- 3D printing (2)
- Robotics (2)
- vibration harvester (2)
- 3D Printed Force Sensor (1)
- 3D printed (1)
- 3D-Druck von leitfähigen Materialien (1)
- Artificial Feedback (1)
- Capacitive Liquid Level Sensor (1)
- Cobotik (1)
Institute
Open Access
- Open Access (7)
- Closed (6)
- Closed Access (4)
- Bronze (1)
- Gold (1)
Avoiding collisions between a robot arm and any obstacle in its path is essential to human-robot collaboration. Multiple systems are available that can detect obstacles in the robot's way prior and subsequent to a collision. The systems work well in different areas surrounding the robot. One area that is difficult to handle is the area that is hidden by the robot arm. This paper focuses on pick and place maneuvers, especially on obstacle detection in between the robot arm and the table that robot is located on. It introduces the use of single pixel time-of-flight sensors to detect obstacles directly from the robot arm. The proposed approach reduces the complexity of the problem by locking axes of the robot that are not needed for the pick and place movement. The comparison of simulated results and laboratory measurements show concordance.
Schlussbericht IntelliKOMP
(2020)
Im Rahmen des Verbundprojektes IntelliKOMP sollten smarte Werkzeughalter und Spannfutter für Werkzeugmaschinen im Hinblick auf Industrie 4.0 entwickelt werden. Durch eine hochintegrierte Elektronik in den peripheren Maschinenkomponenten soll mittels Sensoren eine Datenerfassung, -verarbeitung und drahtlose -übertragung erfolgen. Durch diese Daten soll bspw. eine prädiktive Wartung ermöglicht werden.
A Review on Kinetic Energy Harvesting with Focus on 3D Printed Electromagnetic Vibration Harvesters
(2021)
The increasing amount of Internet of Things (IoT) devices and wearables require a reliable energy source. Energy harvesting can power these devices without changing batteries. Three-dimensional printing allows us to manufacture tailored harvesting devices in an easy and fast way. This paper presents the development of hybrid and non-hybrid 3D printed electromagnetic vibration energy harvesters. Various harvesting approaches, their utilised geometry, functional principle, power output and the applied printing processes are shown. The gathered harvesters are analysed, challenges examined and research gaps in the field identified. The advantages and challenges of 3D printing harvesters are discussed. Reported applications and strategies to improve the performance of printed harvesting devices are presented.
Human–robot collaborative applications have been receiving increasing attention in industrial applications. The efficiency of the applications is often quite low compared to traditional robotic applications without human interaction. Especially for applications that use speed and separation monitoring, there is potential to increase the efficiency with a cost-effective and easy to implement method. In this paper, we proposed to add human–machine differentiation to the speed and separation monitoring in human–robot collaborative applications. The formula for the protective separation distance was extended with a variable for the kind of object that approaches the robot. Different sensors for differentiation of human and non-human objects are presented. Thermal cameras are used to take measurements in a proof of concept. Through differentiation of human and non-human objects, it is possible to decrease the protective separation distance between the robot and the object and therefore increase the overall efficiency of the collaborative application.
This paper presents the development of an energy harvesting solution for a driven tool holder. The tool holder environment was analysed, a test stand built and the designed electromagnetic rotation harvester was evaluated. The reported harvester is based on low cost off-the-shelf components and 3D printed parts. The utilisation of SMD coils allows easy adaptation to changing parameters of the integration area. Energy harvesting in tool holders enables predictive maintenance or condition monitoring in the industrial production. These capabilities are mandatory nowadays in regards of IIoT. A reliable energy source is key for continuous monitoring. Changing batteries becomes obsolete. The results provide useful insight for future harvesters.
In diesem Artikel werden die neuesten Entwicklungen in der Forschungsgruppe um Herrn Prof. Dr. Wendt vorgestellt. Es wird der Einsatz des neuen 3-D-Druckers der Firma Neotech, sowie die neuesten Entwicklungen im Leuchtturmprojekt Flitzmo beschrieben. Zudem konnte dieses Jahr mit dem Projekt zum Einsatz von Robotik im Bereich Assisted Living begonnen werden.