Refine
Year of publication
- 2014 (107) (remove)
Document Type
- Conference Proceeding (50)
- Article (unreviewed) (31)
- Article (reviewed) (17)
- Book (5)
- Part of a Book (3)
- Bachelor Thesis (1)
Conference Type
- Konferenzartikel (31)
- Konferenz-Abstract (10)
- Konferenzband (5)
- Konferenz-Poster (2)
- Sonstiges (2)
Keywords
- Intelligentes Stromnetz (4)
- Kommunikation (4)
- E-Learning (3)
- Elektrolyt (3)
- Herzkrankheit (3)
- Lithiumbatterie (3)
- Mathematik (3)
- Positronen-Emissions-Tomografie (3)
- RoboCup (3)
- SPECT (3)
Institute
- Fakultät Elektrotechnik und Informationstechnik (E+I) (bis 03/2019) (107) (remove)
Open Access
- Open Access (30)
- Closed Access (24)
- Closed (20)
- Bronze (9)
In the last decade, IPv6 over Low power Wireless Personal Area Networks, also known as 6LoWPAN, has well evolved as a primary contender for short range wireless communication and holds the promise of an Internet of Things, which is completely based on the Internet Protocol. In the meantime, various 6LoWPAN implementations are available, be it open source or commercial. One of these implementations, which was developed by the authors' team, was tested on an Automated Physical Testbed for Wireless Systems at the Laboratory Embedded Systems and Communication Electronics of Offenburg University of Applied Sciences, which allows the flexible setup and full control of arbitrary topologies. It also supports time-varying topologies and thus helps to measure performance of the RPL implementation. The results of the measurements show a very good stability and short-term and long-term performance also under dynamic conditions. In addition, it can be proven that the performance predictions from other papers are consistent with real-life implementations.
Impedance of the Surface Double Layer of LSCF/CGO Composite Cathodes: An Elementary Kinetic Model
(2014)
A wide range catalyst screening with noble metal and oxide catalysts for a metal–air battery with an aqueous alkaline electrolyte was carried out. Suitable catalysts reduce overpotentials during the charge and discharge process, and therefore improve the round-trip efficiency of the battery. In this case, the electrodes will be used as optimized cathodes for a future lithium–air battery with an aqueous alkaline electrolyte. Oxide catalysts were synthesized via atmospheric plasma spraying. The screening showed that IrO2, RuO2, La0.6Ca0.4Co3, Mn3O4, and Co3O4 are promising bi-functional catalysts. Considering the high price for the noble metal catalysts further investigations of the oxide catalysts were carried out to analyze their electrochemical behavior at varied temperatures, molarities, and in case of La1−x Ca x CoO3 a varying calcium content. Additionally all catalysts were tested in a longterm test to proof cyclability at varied molarities. Further investigations showed that Co3O4 seems to be the most promising bi-functional catalyst of the tested oxide catalysts. Furthermore, it was shown that a calcium content of x = 0.4 in LCCO has the best performance.
A benchmark analysis of Long Range (LoRaTM) Communication at 2.45 Ghz for safety applications
(2014)
Signal detection and bandwidth estimation, also known as channel segmentation or information channel estimation, is a perpetual topic in communication systems. In the field of radio monitoring this issue is extremely challenging, since unforeseeable effects like fading occur accidentally. In addition, most radio monitoring devices normally scan a wide frequency range of several hundred MHz and have to detect a multitude of different signals, varying in signal power, bandwidth and spectral shape. Since narrowband sensing techniques cannot be directly applied, most radio monitoring devices use Nyquist wideband sensing to discover the huge frequency range. In practice, sensing is normally conducted by an FFT sweep spectrum analyzer that delivers the power spectral density (PSD) values to the radio monitoring system. The channel segmentation is the initial step of a comprehensive signal analysis in a radio monitoring system based on the PSD values. In this paper, a novel approach for channel segmentation is presented that is based on a quantization and a histogram evaluation of the measured PSD. It will be shown that only the combination of both evaluations will lead to an successful automatic channel segmentation. The performance of the proposed algorithm is shown in a real radio monitoring szenario.
Dieser Artikel beschreibt das vom Wissenschaftsministerium Baden-Württemberg geförderte Projekt bwLehrpool, welches zum Ziel hat, landesweit mittels Zentralisierung von Services und übergreifende Kooperationen IT-Kosten nachhaltig zu reduzieren und RZPersonal zu entlasten. Das Projekt umfasst die Schaffung einer zentralen Infrastruktur für PC-Pools, Speziallabore und e-Prüfungen, um eine größere Flexibilität für die ITUnterstützung in Lehre und Forschung zu erreichen. Dabei soll der administrative Aufwand für den Betrieb reduziert und gleichzeitig Lehre und Forschung von einem konkreten, rechnergestützten Arbeitsplatz beziehungsweise einer Räumlichkeit entkoppelt werden. Hierdurch lassen sich bestehende PC-Pools deutlich besser ausnutzen. Zudem sollen Software- und Hardwarekosten verringert werden, indem anders als derzeit, auch heterogene PC-Landschaften genutzt werden können. Der sich im Aufbau befindende Service leistet dabei eine doppelte Abstraktion. Einerseits schafft er ein gemeinsam nutzbares Basissystem, welches sich an die jeweiligen lokalen Gegebenheiten wie Benutzerverwaltung, Home- und gemeinsame Verzeichnisse oder Druckdienste anpasst. Andererseits bietet es die notwendige Abstraktion, um virtuelle Maschinen verschiedenen Typs hochschulübergreifend nutzen zu können. Expertenwissen auf verschiedenen Ebenen wird optimal genutzt, und für die Lehrenden ergibt sich eine neue Perspektive, da sie auf einem einfachen Weg ihre Lehrund Forschungsumgebungen unabhängig von der konkreten Hardware- und Maschinenadministration definieren und gleichzeitig Erfahrungen mit anderen Hochschulen austauschen können.
Mice and rats make up 95% of all animals used in medical research and drug discovery and development. Monitoring of physiological functions such as ECG, blood pressure, and body temperature over the entire period of an experiment is often required. Restraining of the animals in order to obtain this data can cause great inconvenience. The use of telemetric systems solves this problem and provides more reliable results. However, these devices are mostly equipped with batteries, which limit the time of operation or they use passive power supplies, which affects the operating range. The semi-passive telemetric implant being presented is based on RFID technology and overcomes these obstacles. The device is inductively powered using the magnetic field of a common RFID reader device underneath the cage, but is also able to operate for several hours autonomously. Being independent from the battery capacity, it is possible to use the implant over a long period of time or to re-use the device several times in different animals, thus avoiding the disadvantages of existing systems and reducing the costs of purchase and refurbishment.
Formal Description of Inductive Air Interfaces Using Thévenin's Theorem and Numerical Analysis
(2014)
With the development of new integrated circuits to interface radio frequency identification protocols, inductive air interfaces have become more and more important. Near field communication is not only able to communicate, but also possible to transfer power wirelessly and to build up passive devices for logistical and medical applications. In this way, the power management on the transponder becomes more and more relevant. A designer has to optimize power consumption as well as energy harvesting from the magnetic field. This paper discusses a model with simple equations to improve transponder antenna matching. Furthermore, a new numerical analysis technique is presented to calculate the coupling factors, inductions, and magnetic fields of multiantenna systems.
Transcatheter aortiv valve implantation is a new safe strategy treatment for patients with symptomatic severe aortic stenosis and high operative risk. The aim of the study was to compare the pre-and post- muiscatheter aortiv valve implantation procedures to determine the atrioventricuktr conduction time as a potential predictor of permanent pacemaker therapy requirement after transcatheter aortiv valve implantation. The transcatheter aortiv valve implantation patients were divided into groups without pacemaker and with dual or single chamber pacemEtker with diffent atrioventrieular conduction time disturbance before and after transcatheter aortiv valve implantation. In heart failure, patients without permanent pacemaker therapy after transcatheter aortiv valve implantation, atrioventricular conduction time was prolonged after transcatheter aortiv valve implantation. In patients with permanent dual chamber pacemaker therapy after transcatheter aortiv valve implantation, atrioventricular conduction time was normalised with dual chaniber atrioventrieuku pacing mode. Atrioventricular conduction time may be a useful parameter to evaluate the risk of post-procedural atrioventricular conduction block and permanent pacemaker therapy in transcatheter north, valve implantation patients.
The improvements in the hardware and software of communication devices have allowed running Virtual Reality (VR) and Augmented Reality (AR) applications on those. Nowadays, it is possible to overlay synthetic information on real images, or even to play 3D on-line games on smart phones or some other mobile devices. Hence the use of 3D data for business and specially for education purposes is ubiquitous. Due to always available at hand and always ready to use properties of mobile phones, those are considered as most potential communication devices. The total numbers of mobile phone users are increasing all over the world every day and that makes mobile phones the most suitable device to reach a huge number of end clients either for education or for business purposes. There are different standards, protocols and specifications to establish the communication among different communication devices but there is no initiative taken so far to make it sure that the send data through this communication process will be understood and used by the destination device. Since all the devices are not able to deal with all kind of 3D data formats and it is also not realistic to have different version of the same data to make it compatible with the destination device, it is necessary to have a prevalent solution. The proposed architecture in this paper describes a device and purpose independent 3D data visibility any time anywhere to the right person in suitable format. There is no solution without limitation. The architecture is implemented in a prototype to make an experimental validation of the architecture which also shows the difference between theory and practice.
Nowadays, it is assumed of many applications, companies and parts of the society to be always available online. However, according to [Times, Oct, 31 2011], 73% of the world population do not use the internet and thus aren't “online” at all. The most common reasons for not being “online” are expensive personal computer equipment and high costs for data connections, especially in developing countries that comprise most of the world’s population (e.g. parts of Africa, Asia, Central and South America). However it seems that these countries are leap-frogging the “PC and landline” age and moving directly to the “mobile” age. Decreasing prices for smart phones with internet connectivity and PC-like operating systems make it more affordable for these parts of the world population to join the “always-online” community. Storing learning content in a way accessible to everyone, including mobile and smart phones, seems therefore to be beneficial. This way, learning content can be accessed by personal computers as well as by mobile and smart phones and thus be accessible for a big range of devices and users. A new trend in the Internet technologies is to go to “the cloud”. This paper discusses the changes, challenges and risks of storing learning content in the “cloud”. The experiences were gathered during the evaluation of the necessary changes in order to make our solutions and systems “cloud-ready”.
Smoothie: a solution for device and content independent applications including 3D imaging as content
(2014)
Network landscape of recent time contains many different network technologies, a wide range of end-devices with a large scale of capabilities and power, and an immense quantity of information represented in different data formats. Research on 3D imaging, virtual reality and holographic techniques will result in new user interfaces (UI) for mobile devices and will increase their diversity and variety. A lot of effort is being made in order to establish open, scalable and seamless integration of various technologies and content presentation for different devices including those that are mobile, considering the individual situation of the end user. Till today the research is going on in different parts of the world but the task is not completed yet. The goal of this research work is to find a way to solve the above stated problems by investigating system architectures to provide unconstrained, continuous and personalized access to the content and interactive applications everywhere and at anytime with different devices. As a Solution of the problem considered, a new architecture named “Smoothie” is proposed.
Both German and French Air-Source Heat Pump (ASHP) markets have been enjoying an overall upwards trend for many years but, nevertheless, they remain merely slightly penetrated. In terms of market players and their share, the French market is aptly diversified, whereas the German one, being utterly dominated by one single manufacturer, is badly in need of some diversification. At the same time Korean ASHP manufacturers are targeting the French but not German ASHP market. The main purpose of the paper is to find out likely reasons for their one-sided engagement, primarily those associated with the ASHP technology and its system-related aspects.
Efficient, secure and reliable communication is a major precondition for powerful applications in smart metering and smart grid. This especially holds true for the so called primary communication in the Local Metrological Network (LMN) between meter and data collector, as the LMN comes with the most stringent requirements with regard to cost, range, as well as bandwidth and energy efficiency. Until today, LMN field tests are operated all over the world. In these installations, however, energy autarkic systems play a marginal role. This contribution describes the results of the framework 7 (FP 7) WiMBex project (“Remote wireless water meter reading solution based on the EN 13757 standard, providing high autonomy, interoperability and range”). In this project an energy autarkic water meter was developed and tested, which follows the specification of the Wireless M-Bus protocol (EN 13757). The complete system development covers the PCB with the RF transceiver and the microcontroller, the energy converter and storage, and the software with the protocol. This contribution especially concentrates on the design, the development and the verification of the routing protocol. The routing protocol is based on the Q mode of EN13757-5 (Wireless M-Bus) and was extended by an additional energy state related parameter. This extension is orthogonal to the existing protocol and considers both the charge level and the charge characteristics (rate of occurrences, intensity). The software was implemented in NesC under the operating system TinyOS. The system was verified in an automated test bed and in field tests in UK and Ireland.
Automated RF Emulator for a Highly Scalable IEEE802.11p Communication and Localization Subsystem
(2014)
The IEEE802.11p standard describes a protocol for car-to-X and mainly for car-to-car-communication. In the research project Ko-TAG, which is part of the research initiative Ko-FAS, cooperative sensor technology is developed for the support of highly autonomous driving. The Ko-TAG subsystem improves the real-time characteristics of IEEE802.11p needed for precise time of flight real-time localization while still fitting into the regulatory schemes. A secondary radar principle based on communication signals enables localization of objects with simultaneous data transmission. The Ko-TAG subsystem mainly concentrates on the support of traffic safety applications in intra-urban scenarios. This paper details on the development of a fully automated RF emulator used to test the Ko-TAG subsystem.
The RF emulator includes the physical networking nodes, but models the RF environment using RF-waveguides. The RF emulator allows the controlling of path loss and connectivity between any of the nodes with the help of RF attenuators and programmable RF switches, while it is shielded against its surrounding RF environment in the lab. Therefore it is an inexpensive alternative to an RF absorber chamber, which often is not available or exceeds the project’s budget.
Details about the system definition can be found in earlier papers. Test results are shown in the last part of the paper.
Automatisierte Tests für ein IEEE802.11p-kompatibles Kommunikations- und Lokalisierungssubsystem
(2014)
In dem Maße, in dem sich die industrielle Automatisierung verändert, verändern sich auch die Anforderungen an die Sicherheit. Neben der funktionalen Sicherheit rückt dabei immer mehr die Datensicherheit in den Mittelpunkt. Als „best practice“ bietet es sich an, bewährte Sicherungstechniken aus der IT auch in der industriellen Kommunikation einzusetzen.
This paper presents the elements and the results from the European research project inCASA (Integrated Network for Completely Assisted Senior Citizen’s Autonomy), which designed and implemented a seamless integration of heterogeneous systems and network protocols for regionally distributed telecare and telehealth applications. The integration includes a multitude of physical interface, the transcoding of data models using embedded middleware, and a backend system with open interfaces. The implementation was verified in field tests in five European countries.
Immer mehr Anwendungen der Heim- und der Gebäudeautomatisierung werden vernetzt, weil damit erweiterte Funktionen ermöglicht oder Kosten gespart werden können. Dabei führt eine Reihe von Aspekten zu einem erhöhten Risiko für diese vernetzten Systeme. Gegenwärtig arbeiten verschiedene Gruppen an Sicherheitslösungen für die vernetzte Heim- und Gebäudeautomatisierung. Der Beitrag gibt einen Überblick über diese Aktivitäten und zeigt die wesentlichen Entwicklungsrichtungen auf.
Während neue Komponenten für „Short Range Wireless Networks“ längere Zeit eher moderate technische Fortschritte gebracht haben, sind in jüngerer Zeit einige außerordentlich interessante strategische Entwicklungslinien deutlich geworden, die in diesem Beitrag an Hand von konkreten Produktbeispielen vorgestellt werden.
The Internet of Things (IoT), ubiquitous computing and ubiquitous connectivity, Cyber Physical Systems (CPS), ambient intelligence, Machine-to-Machine communication (M2M) or Car-to-Car (C2C)-communication, smart metering, smart grid, telematics, telecare, telehealth – there are many buzzwords around current developments related to the Internet.
This contribution gives an overview on such IoT-applications, as they are already used today to improve the availability of information, increase efficiency, push system limits and extend the value chain. At a closer look, the economic and technical development can be separated into different phases. It is interesting that we are currently at the threshold to a new phase, with decentralized and cooperative communication and control nodes as cornerstones. Thus, embedded systems and their connectivity are in the middle of the scene.
This recent development is described along with some example projects from the author’s team which are used in industrial automation, energy supply and distribution (home automation and smart metering), traffic engineering (cooperative driver assistance systems), and in telehealth and telecare.
Energy management in distribution grids is one of the key challenges that needs to be overcome to increase the share of fluctuating renewable energies. Current control systems for energy management mainly demonstrate centralized- or decentralized-hierarchical control structures. Very few systems manifest a fully decentralized multiagent-based control structure. Multiagent-based control systems promise to be an advantageous approach for the future distributed energy supply system because no central control entity is necessary, which eases parameterization in case of grid topology changes, and the agents are more stable against failures and changes of control topologies. Research is necessary to prove these benefits. In this study, we introduce a design of a multiagent-based voltage control system for low-voltage grids. In detail we introduce cooperative decision-making processes and software solutions that allow the agents to perceive and control their environment, the agent-discovery and localization in different types of communication networks, agent-to-agent communication, and the integration of the multiagent system in existing grid-control infrastructures. Furthermore, the study proposes how different existing technologies can be combined into an applicable multiagent-based voltage control system: the Java/OSGi-based OpenMUC framework allows a generic field–device interaction; peer-to-peer discovery and session establishment functionalities are combined with the agent communication defined by the Foundation for Intelligent Physical Agents (FIPA). The ripple control-signal technology is applied as a fallback communication between the agent and a central grid-control center.
A laser-operated, angle-tunable transducer was employed to excite selectively elastic waves guided along the apex of a solid wedge. The propagation of wedge waves at anisotropic monocrystalline silicon edges with different symmetry properties was studied by optical detection. The reduced symmetry in crystals, as compared to isotropic media, causes a number of new features, such as the existence of supersonic leaky wedge waves, tilted spatial pulse profiles, and other peculiarities of their localization. Experimental and theoretical results are presented for three different types of symmetry configurations: the wedge symmetric about its midplane, the wedge symmetric about the plane normal to its apex line, and the wedge symmetric about one of its faces. The experiments include accurate measurements of the phase velocity and the wave field distribution, providing information on localization and coupling of wedge waves with other waves. Theoretically, the wedge waves were treated by the Laguerre function method, extended to modes that are not localized at the tip of the wedge. This approach allowed an accurate description of the observed localized and leaky wedge waves in anisotropic wedges.
Hybrid SPECT/US
(2014)
This paper presents new measurements of a bronze cast from the right hand of the famous Italian violin virtuoso Nicolò Paganini (1782-1840). These are compared to anthropometric standard values. In addition, detailed dorsal and palmar views of the cast are shown. With a middle finger length of 75 mm, the palm width is 60 mm and the hand length 152 mm, which is significantly below the 5% percentile of today's standard values. Also the finger length index (0.55), the ratio of finger length to palm length (0.98) and the ratio of finger length to palm width (1.25) are significantly above normal limits. Hence, Paganini had abnormal hand measurements with a very small palm and relatively "long" fingers. This remarkable constellation, among others, could have been advantageous for his amazing skills as a violinist.
Monitoring of the molecular structure of lubricant oil using a FT-Raman spectrometer prototype
(2014)
The determination of the physical state of the lubricant materials in complex mechanical systems is highly critical from different points of view: operative, economical, environmental, etc. Furthermore, there are several parameters that a lubricant oil must meet for a proper performance inside a machine. The monitoring of these lubricants can represent a serious issue depending on the analytical approach applied. The molecular change of aging lubricant oils have been analyzed using an all-standard-components and self-designed FT-Raman spectrometer. This analytical tool allows the direct and clean study of the vibrational changes in the molecular structure of the oils without having direct contact with the samples and without extracting the sample from the machine in operation. The FT-Raman spectrometer prototype used in the analysis of the oil samples consist of a Michelson interferometer and a self-designed photon counter cooled down on a Peltier element arrangement. The light coupling has been accomplished by using a conventional 62.5/125μm multi-mode fiber coupler. The FT-Raman arrangement has been able to extract high resolution and frequency precise Raman spectra, comparable to those obtained with commercial FT-Raman systems, from the lubricant oil samples analyzed. The spectral information has helped to determine certain molecular changes in the initial phases of wearing of the oil samples. The proposed instrument prototype has no additional complex hardware components or costly software modules. The mechanical and thermal irregularities influencing the FT-Raman spectrometer have been removed mathematically by accurately evaluating the optical path difference of the Michelson interferometer. This has been achieved by producing an additional interference pattern signal with a λ= 632.8 nm helium-neon laser, which differs from the conventional zero-crossing sampling (also known as Connes advantage) commonly used by FT-devices. It enables the FT-Raman system to perform reliable and clean spectral measurements from the analyzed oil samples.
On the possibility to use leaky feeders for positioning in chirp spread spectrum technologies
(2014)
Real Time Localization Systems using electromagnetic waves have significantly evolved during the last years. They also might be used in industrial and in mining environments. Here, topologies might include tunnels, where it might be difficult to ensure the field coverage. Leaky feeder cables are a common solution in case of normal radio communication. In this paper, we study the possibilities to use leaky feeders also for Time-of-Flight based real time localization in such linear topologies, like tunnels, but possibly also for 2D-localization. Theoretical analysis is verified with real-life measurements, which were performed using Chirp Spread Spectrum Technologies.
Non-responder rate in cardiac resynchronization therapy (CRT) could be partly decreased by individualized parameter optimization excluding adverse hemodynamic timing. In heart failure patients with sinus rhythm, an atrial kick enables the completion of atrial contraction and may significantly enhance the ventricular filling. Compared to that, exclusion of atrial kick is a sign of suboptimal atrioventricular timing. However, the recognition of atrial kick by echocardiography will be negatively affected in patients requiring a very short or long AV delays.
Todays‘ traffic support environments are distributed by nature. In many cases the monitoring, control and guidance of traffic is effected by a federation of coordinating centers, often managed by different organizations, using differing local IT technology and system architecture. Despite the federative character of such systems, maintenance of a consistent overall traffic state is indispensable for a safe operation. This project develops a new type of middleware supporting federative systems
in the domain of Air Traffic Control (ATC), using OMG‘s DDS (Data Distribution Service) standard as contributor.
Air traffic is by nature crossing borders and organizations. The supporting infrastructure represents a federative distributed system of independent Air Traffic Service Units, typically each with its own proprietary system architecture. Interaction between the centers is taking place over dedicated protocols, often organized as a mesh of 1:1 bilateral data exchanges.
This contribution gives an overview of the ongoing efforts to standardize this data exchange. At the core is a data-centric view, using a shared virtual Flight Object as the IT counterpart of a real flight. It permits a uniform way to access and update a flight’s static and dynamic attributes. A middleware is presented that implements this abstraction and maps it onto a physical level, employing DDS (Data Distribution Service) technology for the 1:N dissemination of flight data.
Data is ever increasing in the computing world. Due to advancement of cloud technology the dynamics of volumes of data and its capacity has increased within a short period of time and will keep increasing further. Providing transparency, privacy, and security to the cloud users is becoming more and more challenging along with the volume of data and use of cloud services. We propose a new approach to address the above mentioned challenge by recording the user events in the cloud ecosystem into log files and applying MAR principle namely 1) Monitoring 2) Analyzing and 3) Reporting.
This paper presents the competence-, business- and research-orientated education approach Fit4PracSis (= Fit for Practice and Sciences). Fit4PracSis is designed for freshman students in interdisciplinary engineering degree programs. It is an education concept, which is establishing a relationship to the future profession and scientific work during the introductory study phase. The freshman students will be early trained in important skills, which are necessary for the successful achievement of the final degree and the future business and research activities.
Active safety systems for advanced driver assistance systems act within a complex, dynamic traffic environment featuring various sensor systems which detect the vehicles’ surroundings and interior. This paper describes the recent progress towards a performance evaluation of car-to-car communication (C2C) for active safety systems - in particular for crash constellation prediction. The methodology introduced in this work is designed to evaluate the impact of different sensors on the accuracy of a crash constellation prediction algorithm. The benefit of C2C communication (viewed as a virtual sensor) within a sensor data fusion architecture for pre-crash collision prediction is explored. Therefore, a simulation environment for accident scenarios analysis reproducing real-world sensor behaviour, is designed and implemented. Performance evaluation results show that C2C increases confidence in the estimated position of the oncoming vehicle. With C2C enhancement the given accuracy in time-to-collision (TTC) estimation is achievable about 110 ms earlier for moderate velocities at TTC range of [0.5s..0.2s]. The uncertainty in the vehicle position prediction at the time of collision can be reduced about half by integrating C2C communication into the sensor data fusion.
This work describes a camera-based method for the calibration of optical See-Through Glasses (STGs). A new calibration technique is introduced for calibrating every single display pixel of the STGs in order to overcome the disadvantages of a parametric model. A non-parametric model compared to the parametric one has the advantage that it can also map arbitrary distortions. The new generation of STGs using waveguide-based displays [5] will have higher arbitrary distortions due to the characteristics of their optics. First tests show better accuracies than in previous works. By using cameras which are placed behind the displays of the STGs, no error prone user interaction is necessary. It is shown that a high accuracy tracking device is not necessary for a good calibration. A camera mounted rigidly on the STGs is used to find the relations between the system components. Furthermore, this work elaborates on the necessity of a second subsequent calibration step which adapts the STGs to a specific user. First tests prove the theory that this subsequent step is necessary.
Non-fluoroscopic Imaging with MRT/CT Image Integration - Catheter Positioning with Double Precision
(2014)
Introduction: When antiarrhythmic drug therapy has failed, different approaches of pulmonary vein isolation are considered a reasonable option in the treatment of atrial fibrillation. It will be performed predominantly by radiofrequency catheter ablation. As the individual anatomy of left atrium and the pulmonary veins differs considerably, accurate visualization of these structures is essential during catheter positioning. Using non-fluoroscopic electroanatomic mapping system with image integration, electroanatomic mapping can be combined with highly detailed anatomical MRT or CT information on complex left atrial structures. This may facilitate catheter navigation during ablation for atrial fibrillation.
Methods: The CARTO XP electroanatomic system was used in a project during biomedical engineering study to practice image integration of anonymized real patients that underwent pulmonary vein isolation by CARTO XP and a MRT/CT procedure. Using the image integration software, MRT or CT images were imported into the CARTO XP system. The next process was segmentation of the acquired images. It involves dividing the images into different regions in order to select the structures of interest. In clinical routine, this segmentation has to be performed before catheter ablation. Then, the segmented images were aligned with the reconstructed electroanatomic maps. This consists of several steps, including selection of the left atrium, scaling of the reconstructed geometry, fusion of the structures using landmarks, and optimization of the integration by adjusting the reconstructed geometry of the left atrium.
Results: In the 3 months lasting period of the project, image integration was trained in 13 patients undergoing catheter ablation for atrial fibrillation. Within this period, time consumption for the process decreased from about 90 minutes at the beginning to about 35 minutes at the end for one patient.
Conclusion: Image integration into non-fluoroscopic electroanatomic map is a sophisticated tool in cardiac radiofrequency catheter ablation. Intensive training is necessary to control the procedure.
Die Kenntnis der Messunsicherheit verbessert die Aussagekraft von Einsatzhärtungstiefe-Messungen. Ausgehend von der Definition in der DIN EN ISO 2639:2002 wird unter Anwendung des „Guide to the Expression of Uncertainty in Measurement“ die Messunsicherheit abgeschätzt. Dazu werden die Einflüsse der Härteprüfung, der Positionierung der Prüfpunkte und der Probe berücksichtigt. Das Verfahren wird an zwei Beispielen angewendet: Zunächst werden die gemäß Norm zulässigen Toleranzen vollständig ausgenutzt, anschließend die Unsicherheit eines automatisierten Härteprüfers experimentell ermittelt. In beiden Fällen dominiert der Probeneinfluss das Ergebnis.
Mit längerfristigen Nutzerbefragungen in zwei unmittelbar benachbarten Bürogebäuden in Freiburg wurden das Temperaturempfinden der Nutzer und deren Zufriedenheit mit dem thermischen Raumkomfort zweimal täglich erfasst. Ein Bürogebäude wird im Sommer mit einem maschinellen Nachtlüftungskonzept konditioniert und das zweite verfügt über eine Betonkerntemperierung und eine Zu- und Abluftanlage. Auf Basis der vorhandenen Daten aus der Erhebung wurde mit Hilfe von Regressionsanalysen ein Modell zur Vorhersage der Komforttemperatur berechnet und mit den Modellen in DIN EN 15251 verglichen.
Temperature regulation is an important component for modern high performance single -core and multi-core processors. Especially high operating frequencies and architectures with an increasing number of monolithically integrated transistors result in a high power dissipation and - since processor chips convert the consumed electrical energy into thermal energy - in high operating temperatures. High operating temperatures of processors can have drastic consequences regarding chip reliability, processor performance, and leakage currents. External components like fans or heat spreaders can help to reduce the processor temperature - with the disadvantage of additional costs and reduced reliability. Therefore, software based algorithms for dynamic temperature management are an attractive alternative and well known as Dynamic Thermal Management (DTM). However, the existing approaches for DTM are not taking into account the requirements of real-time embedded computing, which is the objective in the given project. The first steps are the profiling and the thermal modeling of the system, which is reported in this paper for a Freescale i. MX6Q quad-core microprocessor. An analytical model is developed and verified by an extensive set of measurement runs.
Die zunehmende Anzahl von Transistoren mit immer kleineren Strukturgrößen führt zu einer zunehmenden Leistungsaufnahme in modernen Prozessoren. Das gilt insbesondere für High-End Prozessoren, die mit einer hohen Taktfrequenz betrieben werden. Die aufgenommene Leistung wird in Wärme umgewandelt, die in einer Temperaturerhöhung der Prozessoren resultiert. Hohe Betriebstemperaturen verursachen u.a. eine verringerte Rechenleistung, eine kürzere Lebensdauer des Prozessors und höhere Leckströme. Aus diesen Gründen wird aktives, dynamisches thermisches Management immer wichtiger. Dieser Beitrag stellt eine Erweiterung zu dem Standard- Linux-Scheduler in der Kernel-Version 3.0 für eingebettete Systeme vor: einen PID-Regler, der unter Angabe einer Solltemperatur eine dynamische Frequenz- und Spannungsskalierung durchführt. Die Experimente auf dem Freescale LMX6 Quadcore-Prozessor zeigen, dass der PID-Regler die Betriebstemperatur des Prozessors an die Solltemperatur regeln kann. Er ist die Grundlage für eine in Zukunft zu entwickelnde prädiktive Regelung.
Introduction: Radiofrequency ablation allows successful treatment of most supraventricular reentrant and focal tachycardias and an increasing number of ventricular tachycardias. Different catheter tips are used. While AV nodal reentrant tachycardias require catheters with a tip of 4mm length, an 8 mm tip electrodes will be used for atrial flutter. A pulmonary vein isolation will be performed using 4 mm irrigated tip electrodes to achieve larger and deeper lesions. The need of a tubing set and pump for saline transfusion is a disadvantage of this technique. Gold tip electrodes can alternatively be used to produce increases in lesion size. Aim of this study was to compare RF ablation catheters of exactly the same geometry with either platin-iridum or gold tip.
Methods: Gold provides an almost four-fold thermal conductivity compared with platinum-iridium. The Cerablate G flutter (Osypka AG, Rheinfelden-Herten) is a newly designed radiofrequency ablation catheter with an 8 mm gold tip. Its power delivery was compared with the Cerablate flutter of same geometry but platin-iridium tip. Therefore, in-vitro RF ablations were performed using pork meat in a 0.9% saline solution at 37°C temperature. A pulsed volume flow was generated using a pump to simulate the blood flow. Temperature controlled ablations of 60 seconds using 45, 55 and 65°C and a maximum of 70W RF power were performed.
Results: Using the Osypka HAT300smart ablator, cumulative power of 167, 474 and 672W was delivered with gold tip against 121, 227 and 310 W with platin-iridium tip. By the Stockert SmartAblate G4 ablator, 202, 546 and 1075W was delivered with gold tip against 117, 246 and 394W with platin-iridium using 45, 55 and 65°C temperature.
Conclusion: During in-vitro investigations, the gold tip electrodes allowed a in power delivery increase of 117 up to 173%. Thus, gold tips can be used to increase lesion depth and diameter without cooling equipment.
Since direct current high energy shock fulguration was initially performed in the mid 1980s, ablation of cardiac arrhythmias has come to widespread use. Today the most frequently used energy source for catheter ablation is radio frequency (RF). It was the German engineer Peter Osypka who made available the HAT 100 as the first simple commercial RF ablator.
Nevertheless, in the first years of ablation, physicians were effectively working in the dark. Until today with an increasing understanding of arrhythmia mechanisms, both at the atrial and ventricular levels, this curative technology has made tremendous progress. Now, due to crucial improvement of RF ablation generators, temperature and contact force sensor catheters in combination with non-flouroscopic electroanatomical mapping technologies, computerized temperature and impedance controlled radiofrequency catheter ablation can be used to cure all types of arrhythmias including atrial and ventricular fibrillation. For the latter, cooled ablation by saline solution irrigated catheters has been developed to a widely used standard method. This procedure resulting in pulmonary vein isolation requires transseptal puncture and is technically demanding. Nevertheless, it has shown to be more effective than antiarrhythmic drug therapy.
While earliest RF ablations were performed with non-steerable catheters, today are used steerable sensor catheters without or with external and internal cooling and tips of 4mm or 8mm length. Further innovations like integration of mapping and cardiac imaging give exact information of the number of pulmonary veins and branching patterns and help to correlate electrical signals with anatomical structures.
The magnetic navigation significantly improved the success rates and safety of catheter ablation. Thus, in most cases RF catheter ablation has developed in the treatment of supraventricular arrhythmias from an alternative approach to drug therapy into the first therapeutic choice providing low complication rates.
In future, robotic navigation will further simplify procedures and reduce radiation exposure of this curative approach.
WirelessHART protocol was specifically designed for real-time communication in the wireless sensor networks domain for industrial process automation requirements. Whereas the major purpose of WirelessHART is the read-out of sensors with moderate real-time requirements, an increasing demand for integration of actuator applications can be observed. Therefore, it must be verified that the WirelessHART protocol gives sufficient support to real-time industry requirements. As a result, the delay of especially burst and command messages from actuator and sensor nodes to the gateway and vice versa must be analyzed. In this paper, we implemented a WirelessHART network scenario in WirelessHART simulator in NS-2 [8], simulated and analyzed its time characteristics under ideal and noisy conditions. We evaluated the performance of the implementation in order to verify whether the requirements of industrial process and control can be met. This implementation offers an early alternative to expensive test beds for WirelessHART in real-time actuator applications.
Lithium–sulfur (Li/S) cells are promising candidates for a next generation of safe and cost-effective high energy density batteries for mobile and stationary applications. At present, most Li/S cells still suffer from relatively poor cyclability, capacity loss under moderate current densities and self-discharge. Furthermore, the underlying chemical mechanisms of the general discharge/charge behavior as well as Li/S-specific phenomena like the polysulfide shuttle are not yet fully understood. Here we present a thermodynamically consistent, fully reversible continuum model of a Li/S cell with simplified four-step electrochemistry, including a simple description of the polysulfide shuttle effect. The model is parameterized using experimental discharge curves obtained from literature and reproduces behavior at various current densities with fairly high accuracy. While being instructively simple, the presented model can still reproduce distinct macroscopic Li/S-cell features caused by the shuttle effect, e.g., seemingly infinite charging at low charge current densities, and suboptimal coulombic efficiency. The irreversible transport of active material from the cathode to the anode results in a voltage drop and capacity loss during cycling, which can also be observed experimentally.
The characteristic features and applications of linear and nonlinear guided elastic waves propagating along surfaces (2D) and wedges (1D) are discussed. Laser-based excitation, detection, or contact-free analysis of these guided waves with pump–probe methods are reviewed. Determination of material parameters by broadband surface acoustic waves (SAWs) and other applications in nondestructive evaluation (NDE) are considered. The realization of nonlinear SAWs in the form of solitary waves and as shock waves, used for the determination of the fracture strength, is described. The unique properties of dispersion-free wedge waves (WWs) propagating along homogeneous wedges and of dispersive wedge waves observed in the presence of wedge modifications such as tip truncation or coatings are outlined. Theoretical and experimental results on nonlinear wedge waves in isotropic and anisotropic solids are presented.
Cardiac resynchronization therapy with atrioventricular and interventricular pacing delay optimized biventricular pacing is an established therapy for heart failure patients with sinus rhythm and reduced left ventricular ejection fraction. The aim of the study was to evaluate atrioventricular and interventricular pacing delay optimization in cardiac resynchroniza-tion therapy by transthoracic impedance cardiography in biventricular pacing with different left ventricular electrode po-sition. In biventricular pacing heart failure patients with lateral, posterolateral and anterolateral left ventricular electrode position, the mean optimal atrioventricular sening delay was 108.6 ± 20.3 ms and the mean optimal interventricular pac-ing delay -12.3 ± 25.9 ms. Transthoracic impedance cardiography may be a useful technique to optimize atrioventricular and interventricular pacing delay in biventricular pacing with different left ventricular electrode position.
Hintergrund: Das elektrische interventrikuläre Delay (IVD) und die Lage der linksventrikulären (LV) Elektrode zum Ort der spätesten LV Erregung sind bei Patienten (P) mit Herzinsuffizienz (HF), reduzierter LV Funktion und breiter QRS Dauer (QRSD) von Bedeutung für den Erfolg der kardialen Resynchronisationstherapie (CRT). Die LV Elektrokardiographie ermöglicht eine Abschätzung des elektrischen IVD. Ziel der Studie besteht in der nicht-invasiven Evaluierung des elektrischen IVD bei Patienten (P) mit Vorhofflimmern (AFib) mit und ohne CRT mit biventrikulärer (BV) Stimulation.
Methoden: Bei 49 HF P mit AFib (Alter 63,9 ± 10,8 Jahre; 43 Männer und 6 Frauen) mit New York Heart Association (NYHA) Klasse 2,9 ± 0,4, LV Ejektionsfraktion 26,03 ± 7,99 % und QRS-Dauer (QRSD) 143,69 ± 35,62 ms wurde das elektrische IVD als Intervall zwischen Beginn des QRS-Komplexes im Oberflächen EKG und Beginn des LV Signals im transösophagealen LV EKG bei 31 HF P mit AFib und bei 18 HF P mit AFib und CRT präoperativ bestimmt. Das fokussierte bipolare LV EKG wurde mittels Osypka TO Sonde mit halbkugelförmigen Elektroden in Höhe des maximalen LV Signals registriert.
Ergebnisse: Bei 31 HF P mit AFib betrugen QRSD 135,48 ± 38,78 ms, IVD 49,55 ± 26,38 ms, QRSD-IVD-Verhältnis 3,12 ± 1,11 und das IVD korrelierte mit der QRSD (r=0,75, P<0,001) und dem QRSD-IVD-Verhältnis (r=-0,67, P<0,001) (Fig.). Bei 18 HF P mit AFib und CRT Defibrillator betrugen QRSD 157,83 ± 24,38 ms, IVD 61,94 ± 26,88 ms, QRSD-IVD-Verhältnis 3,12 ± 1,89 und das IVD korrelierte mit der QRSD (r=0,47, P=0,049) und dem QRSD-IVD-Verhältnis (r=-0,73, P<0,001). Bei 72,2 % CRT Responder (R) (n=13) betrugen QRSD 158,15 ± 22,4 ms, IVD 64,23 ± 24,62 ms, QRSD-IVD-Verhältnis 2,82 ± 1,32 und das IVD korrelierte mit der QRSD (r=0,57, P=0,043) und dem QRSD-IVD-Verhältnis (r=-0,76, P=0,0024). Bei 27,8 % CRT Non-Responder (NR) (n=5) betrugen QRSD 157 ± 31,94 ms, IVD 56 ± 34,52 ms, QRSD-IVD-Verhältnis 3,88 ± 2,98 und das IVD korrelierte nicht mit der QRSD (r=0,33, P=0,591) und dem QRSD-IVD-Verhältnis (r=-0,732, P=0,159). Die CRT R verbesserten sich in der NYHA Klasse von 3 ± 0,2 auf 2,2 ± 0,3 (P<0,001) während 15,3 ± 13,1 Monaten BV Stimulation. Bei 15 CRT NR kam es zu keiner Verbesserung der NYHA Klasse von 3 auf 3,3 ± 0,97 (P=0,529) während 18,8 ± 20,7 Monaten BV Stimulation.
Schlussfolgerungen: Das transösophageale LV EKG ermöglicht bei HF-P mit AFib die nichtinvasive Messung des elektrischen IVD präoperativ vor CRT. IVD und QRSD-IVD-Verhältnis sind möglicherweise einfach anwendbare Parameter zur Vorhersage von CRT R und CRT NR bei P mit AFib.
Cardiac resynchronization therapy is an established therapy for heart failure patients with sinus rhythm, reduced left ventricular ejection fraction and prolongation of QRS duration. The aim of the study was to evaluate ventricular desynchronization with electrical interventricular delay (IVD) to left ventricular delay (LVD) ratio in atrial fibrillation heart failure patients. IVD and LVD were measured by transesophageal posterior left ventricular ECG recording. In atrial fibrillation heart failure patients with prolonged QRS duration, the mean IVD-to-LVD-ratio was 0.84 +/- 0.42 with a range from 0.17 to 2.2 IVD-to-LVD-ratio. IVD-to-LVD-ratio correlated with QRS duration. IVD-to-LVD-ratio may be a useful parameter to evaluate electrical ventricular desynchronization in atrial fibrillation heart failure patients.
Pressure dynamics in metal-oxygen (metal-air) batteries: a case study on sodium superoxide cells
(2014)
Electrochemical reactions in metal–oxygen batteries come along with the consumption or release of gaseous oxygen. We present a novel methodology for investigating electrode reactions and transport phenomena in metal–oxygen batteries by measuring the pressure dynamics in an enclosed gas reservoir above the oxygen electrode. The methodology is exemplified by a room-temperature sodium–oxygen battery forming sodium superoxide (NaO2) in an electrolyte of diethylene glycol dimethyl ether (diglyme) and sodium trifluoromethanesulfonate (NaOSO2CF3, NaOTf). The experiments are supported by microkinetic simulations with a one-dimensional multiphysics continuum model. During galvanostatic cycling over 30 cycles, a constant oxygen consumption/release rate is observed upon discharge/charge. The number of transferred electrons per oxygen molecule is calculated to 1.01 ± 0.02 and 1.03 ± 0.02 for discharge and charge, respectively, confirming the nature of the oxygen reaction product as superoxide O2–. The same ratio is observed in cyclic voltammetry experiments with low scan rate (<1 mV/s). However, at higher scan rates, the ratio increases as a result of oxygen transport limitations in the electrolyte. We introduce electrochemical pressure impedance spectroscopy (EPIS) for simultaneously analyzing current, voltage, and pressure of electrochemical cells. Pressure recording significantly increases the sensitivity of impedance toward oxygen transport properties of the porous electrode systems. In addition, we report experimental data on the diffusion coefficient and solubility of oxygen in electrolyte solutions as important parameters for the microkinetic models.
Introduction: Despite lots of developments in the last years, radiofrequency ablation of rhythm diseases is a safe but still complex procedure that requires special experience and expertise of the physicians and biomedical engineers. Thus, there is a need of special trainings to become familiar with the different equipment and to explain several effects that can be observed during clinical routine.
Methods: The Offenburg University of Applied Sciences offers a biomedical engineering study path specialized in the fields of cardiology, electrophysiology and cardiac electronic implants. It`s Peter Osypka Institute for Pacing and Ablation provides teaching following the slogan “Learning by watching, touching and adjusting”. It conducts lots of trainings for students as well as young physicians interested in electrophysiology and radiofrequency ablation.
Results: In-vitro trainings will be provided using the Osypka HAT 200 and HAT300s, Stockert EPshuttle and SmartAblate system as well as the Boston EPT-1000XP and Maestro 3000 and the Radionics RFG-3E cardiac radio frequency ablation generators. All of them require different handling as well as special accessories like catheter connection cables or boxes and back plates. The participants will be trained in the setup of temperature, power and cut-off impedance dependent on different ablation catheters. Furthermore troubleshooting in hard- and software is part of the program. Performing procedures in pork or animal protein and using physiological saline solution to simulate the blood flow, they can study the influence of contact force and impedance on lesion geometry etc. and to avoid adverse effects like “plops”. Lots of catheter types are available: 4mm tip, 8mm standard and gold tip, open and closed irrigated tip ablation catheters of different companies. The experiments will be completed by measuring the lesion size dependent on the used catheter type and ablation settings.
Conclusion: In-vitro training in radiofrequency ablation is a challenge for biomedical engineering students and young physicians.
This paper investigates the maximum torque capability and torque ripple reduction using the asymmetric stator teeth for interior permanence magnet (IPM) synchronous machines. Traditional electric machines have the identical width for all stator teeth and the winding function is fixed. Using different widths for different stator teeth changes the winding function, therefore, the torque ripple components. The mathematical modeling of interior permanent magnet (IPM) synchronous machine torque ripple and finite element analysis simulation results for the characteristic properties of electric machines are presented. Compared with a similar rating IPM machine, certain combinations of the teeth widths can reduce the torque ripple by 80% with less than 4% average torque decline.
Private households constitute a considerable share of Europe's electricity consumption. The current electricity distribution system treats them as effectively passive individual units. In the future, however, users of the electricity grid will be involved more actively in the grid operation and can become part of intelligent networked collaborations. They can then contribute the demand and supply flexibility that they dispose of and, as a result, help to better integrate renewable energy in-feed into the distribution grids.
This paper describes the new Sweaty humanoid adult size robot trying to qualify for the RoboCup 2014 adult size humanoid competition. The robot is built from scratch to eventually allow it to run. One characteristic is that to prevent the motors from overheating, water evaporation is used for cooling. The robot is literally sweating which has given it its name. Another characteristic is, that the motors are not directly connected to the frame but by means of beams. This allows a variable transmission ratio depending on the angle.
Der Übergang Schule-Studium wird an der Hochschule Offenburg im Vorbereitungskurs Mathematik per Smartphone bzw. Tablet unterstützt. Eine Mathe-App gibt zu den Trainingsaufgaben bei Bedarf Tipps und Teilschritte und hilft so den Studierenden, gemäß individuellem Tempo und Vorkenntnisstand zu arbeiten. Dies fördert eine Aktivierung der Kursteilnehmer auch bei großer Heterogenität. Der mobile Ansatz erlaubt, die ca. 400 Teilnehmer des Präsenz-Kurses in normalen Klassenräumen ohne PC-Ausstattung mit einem eCoach zu unterstützen und ermöglicht die Flexibilisierung von Übungszeit und –Ort über die Präsenzzeit hinaus.
Dieser für die heutige junge Generation attraktive Lernzugang entstand als Kooperationsprojekt zwischen der MassMatics UG und der Hochschule Offenburg. Durch die inhaltliche Orientierung am hochschulübergreifenden Mindestanforderungskatlog Mathematik des cosh-Arbeitskreises entstand eine Lösung, die jedem Studienanfänger zur Vorbereitung auf das Studium nutzen kann (auch ohne Präsenzkurs), die zu den Brückenkurs-Inhalten vieler Hochschulen passt und für die aktuell schon Kooperationsprojekte mit Schulen starten.
Das Projekt MINT-College TIEFE (Talente Individuell, Erfolgreich Fördern und Entwickeln) der Hochschule Offenburg wird im Rahmen des Bund-Länder-Programms Qualitätspakt Lehre aus Mitteln des Bundesministeriums für Bildung und Forschung (BMBF) unter dem Förderkennzeichen 01PL11016 gefördert. Unterstützt wird das Projekt vom Informationszentrum der Hochschule Offenburg.
Der Übergang Schule-Studium wird an der Hochschule Offenburg im Vorbereitungskurs Mathematik per Smartphone bzw. Tablet unterstützt. Eine Mathe-App gibt zu den Trainingsaufgaben bei Bedarf Tipps, Teilschritte und ausführliche Erklärungen und hilft so den Studierenden, die Lösungen in ihrer individuellen Lerngeschwindigkeit zu entwickeln. Der mobile Ansatz erlaubt, die ca. 400 Teilnehmer des Präsenz-Kurses in normalen Klassenräumen ohne PC-Ausstattung mit E-Learning vertraut zu machen und unterstützt die Flexibilisierung von Übungszeit und -ort über die Präsenzzeit hinaus. Durch die inhaltliche Orientierung am hochschulübergreifenden COSH (Cooperation Schule Hochschule) Mindestanforderungskatalog Mathematik entstand eine Lösung, die jedem Studienanfänger zur Vorbereitung auf das Studium nutzen kann, die zu den Brückenkurs-Inhalten vieler Hochschulen passt und für die aktuell schon Kooperationsprojekte mit Schulen starten.
E-Tutoren-Ausbildung: Lernerfahrungen reflektieren – Lehrhandlungskompetenzen dialogisch aufbauen
(2014)
A new RFID/NFC (ISO 15693 standard) based inductively powered passive SoC (System on chip) for biomedical applications is presented here. The proposed SOC consists of an integrated 32 bit microcontroller, RFID/NFC frontend, sensor interface circuit, analog to digital converter and some peripherals such as timer, SPI interface and memory devices. An energy harvesting unit supplies the power required for the entire system for complete passive operation. The complete chip is realized on CMOS 0.18 μm technology with a chip area of 1.5 mm × 3.0 mm.
Die direkte Vermarktung von Strom aus Wind und Sonne stellt einen wichtigen Schritt der Energiewende dar. Einerseits kann durch die Marktintegration die Unabhängigkeit von EEG-Subventionen gelingen. Andererseits wird über diese Mechanismen die Stromerzeugung an der Nachfrage orientiert, wodurch zur Stabilität des Stromnetzes beigetragen wird. Ein Beispiel dafür ist die lokale Vermarktung von PV-Strom in einem Mietshaus. Für deren Umsetzung benötigen die Akteure ein Mess- und Steuerungssystem, dass vor Ort Zähler- und Anlagendaten erfasst und die Abrechnung der Mieter vereinfacht. Außerdem sollte es Kennwerte wie beispielsweise den PV-Anteil berechnen und gegebenenfalls ein Blockheizkraftwerk steuern. Weder die Zählersysteme der Messstellenbetreiber noch die Steuerungssysteme von PV- oder Blockheizkraftwerken erfüllen diese Anforderungen ausreichend. In der Forschung ist man währenddessen bereits einen Schritt weiter und arbeitet an technischen Systemen, die für wesentlich komplexere Energiesystem- und Markttopologien ausgelegt werden. In dieser Arbeit werden die neuen technischen Anforderungen der Direktvermarktung in einem Mietshaus identifiziert und mit dem Stand aktueller Marktprodukte sowie dem System »OpenMUC« aus der Forschung verglichen.
Durch den digitalen Wandel, sowie durch die an Benutzerfreundlichkeit und Leistung zunehmenden technischen Geräte im Endbenutzer-Bereich beginnt die Bedeutung von Augmented-Reality Applikationen zu wachsen. Daher ist das Ziel dieser Arbeit die Entwicklung einer Engine auf iOS Basis, zur Dastellung von Augmented-Reality Inhalten. Die Engine wurde nach dem Vorbild von Komponenten-basierten Game Engines entworfen, da diese beinahe identische Anforderungen besitzen. Die, im Rahmen dieser Arbeit erstellte Engine wurde mit Unterstützung der 5d lab Gmb entwickelt. Durch die Verwendung des, nach Erfahrungswerten, schnellsten Mobile Augmented Reality SDK und einer gelungenen Engine-Architektur konnte ein Produkt entwickelt werden, dass mit bestehenden Applikationen konkurrenzfähig ist.
Although short range wireless communication explicitly targets local and very regional applications, range continues to be an extremely important issue. The range directly depends on the so called link budget, which can be increased by the choice of modulation and coding schemes. Especially, the recent transceiver generation comes with extensive and flexible support for Software Defined Radio (SDR). The SX127x family from Semtech Corp. is a member of this device class and promises significant benefits for range, robust performance, and battery lifetime compared to competing technologies. This contribution gives a short overview into the technologies to support Long Range (LoRa ™), describes the outdoor setup at the Laboratory Embedded Systems and Communication Electronics of Offenburg University of Applied Sciences, shows detailed measurement results and discusses the strengths and weaknesses of this technology.
Integration of BACNET OPC UA-Devices Using a JAVA OPC UA SDK Server with BACNET Open Source Library
(2014)
This book constitutes the proceedings of the 6th International Workshop on Communication Technologies for Vehicles, Nets4Cars/Nets4Trains/Nets4Aircraft 2014, held in Offenburg, Germany in May 2014. The 10 papers presented in this volume were carefully reviewed and selected from 15 submissions. The book also contains 4 invited papers. The contributions are organized in topical sections named: automotive issues, car-to-car, aviation issues, in-car, and infrastructures.
PET and SPECT in Psychiatry
(2014)
PET and SPECT in Psychiatry showcases the combined expertise of renowned authors whose dedication to the investigation of psychiatric disease through nuclear medicine technology has achieved international recognition. The classical psychiatric disorders as well as other subjects – such as suicide, sleep, eating disorders, and autism – are discussed and the latest results in functional neuroimaging are detailed. Most chapters are written jointly by a clinical psychiatrist and a nuclear medicine expert to ensure a multidisciplinary approach. This state of the art compendium will be valuable to all who have an interest in the field of neuroscience, from the psychiatrist and the radiologist/nuclear medicine specialist to the interested general practitioner and cognitive psychologist. It is the first volume of a trilogy on PET and SPECT imaging in the neurosciences; other volumes will focus on PET and SPECT in neurology and PET and SPECT of neurobiological systems.
PET and SPECT of Neurobiological Systems combines the expertise of renowned authors whose dedication to the development of novel probes and techniques for the investigation of neurobiological systems has achieved international recognition. Various aspects of neurotransmission in the brain are discussed, such as visualization and quantification of (more than 20 different) neuroreceptors, neuroinflammatory markers, transporters, and enzymes as well as neurotransmitter synthesis, β-amyloid deposition, cerebral blood flow, and the metabolic rate of glucose. The latest results in probe development are also detailed.
Most chapters are written jointly by radiochemists and nuclear medicine specialists to ensure a multidisciplinary approach. This state of the art compendium will be valuable to anyone in the field of clinical or preclinical neuroscience, from the radiochemist and radiologist/nuclear medicine specialist to the interested neurobiologist and general practitioner. It is the second volume of a trilogy on PET and SPECT imaging in the neurosciences. Other volumes focus on PET and SPECT in psychiatry and PET and SPECT in neurology".