Refine
Year of publication
Document Type
- Article (reviewed) (274) (remove)
Is part of the Bibliography
- yes (274) (remove)
Keywords
- 3D printing (7)
- blockchain (6)
- Blockchain (4)
- lithium-ion battery (4)
- mechanical properties (4)
- neuroprosthetics (4)
- Acceptance (3)
- Adsorption (3)
- COVID-19 (3)
- Deep Leaning (3)
Institute
- Fakultät Maschinenbau und Verfahrenstechnik (M+V) (114)
- Fakultät Elektrotechnik, Medizintechnik und Informatik (EMI) (ab 04/2019) (73)
- INES - Institut für nachhaltige Energiesysteme (47)
- Fakultät Elektrotechnik und Informationstechnik (E+I) (bis 03/2019) (34)
- Fakultät Wirtschaft (W) (31)
- Fakultät Medien (M) (ab 22.04.2021) (17)
- ivESK - Institut für verlässliche Embedded Systems und Kommunikationselektronik (15)
- POIM - Peter Osypka Institute of Medical Engineering (12)
- IMLA - Institute for Machine Learning and Analytics (9)
- ACI - Affective and Cognitive Institute (6)
Open Access
- Open Access (274) (remove)
Online grocery shopping (OGS) has significantly risen due to accelerated retail digitization and reshaped consumer shopping behaviors over the last years. Despite this trend, the German online grocery market lags behind its international counterparts. Notably, with almost half of the German population aged over 50 and the 55–64 age group emerging as the largest user segment in e-commerce, the over-50 demographic presents an attractive yet relatively overlooked audience for the expansion of the online grocery market. However, research on OGS behavior among German over-50s is scarce. This study addresses this gap, empirically investigating OGS adoption factors within this demographic through an online survey with 179 respondents. Our findings reveal that over a third of the over-50 demographic has embraced OGS, indicating a growing receptivity for OGS among the over-50s. Notably, home delivery, product variety, convenience, and curiosity emerged as primary drivers for OGS adoption among this demographic. Surprisingly, most adopters did not increase online grocery orders since 2020 and a not inconsiderable proportion have even stopped buying groceries online again. For potential OGS adopters, regional product availability turned out as a motivator, signaling substantial growth potential and providing online grocers with strategic opportunities to target this demographic. In light of our research, we offer practical suggestions to online grocery retailers, aiming to overcome barriers and capitalize on key drivers identified in our study for sustained growth in the over-50 market segment.
In a randomized controlled cross-over study ten male runners (26.7 ± 4.9 years; recent 5-km time: 18:37 ± 1:07 min:s) performed an incremental treadmill test (ITT) and a 3-km time trial (3-km TT) on a treadmill while wearing either carbon fiber insoles with downwards curvature or insoles made of butyl rubber (control condition) in light road racing shoes (Saucony Fastwitch 9). Oxygen uptake, respiratory exchange ratio, heart rate, blood lactate concentration, stride frequency, stride length and time to exhaustion were assessed during ITT. After ITT, all runners rated their perceived exertion, perceived shoe comfort and perceived shoe performance. Running time, heart rate, blood lactate levels, stride frequency and stride length were recorded during, and shoe comfort and shoe performance after, the 3-km TT. All parameters obtained during or after the ITT did not differ between the two conditions [range: p = 0.188 to 0.948 (alpha value: 0.05); Cohen's d = 0.021 to 0.479] despite the rating of shoe comfort showing better scores for the control insoles (p = 0.001; d = −1.646). All parameters during and after the 3-km TT showed no differences (p = 0.200 to 1.000; d = 0.000 to 0.501) between both conditions except for shoe comfort showing better scores for control insoles (p = 0.017; d = −0.919). Running with carbon fiber insoles with downwards curvature did not change running performance or any submaximal or maximal physiological or biomechanical parameter and perceived exertion compared to control condition. Shoe comfort is impaired while running with carbon fiber insoles. Wearing carbon fiber insoles with downwards curvature during treadmill running is not beneficial when compared to running with control insoles.
This paper provides a comprehensive overview of approaches to the determination of isocontours and isosurfaces from given data sets. Different algorithms are reported in the literature for this purpose, which originate from various application areas, such as computer graphics or medical imaging procedures. In all these applications, the challenge is to extract surfaces with a specific isovalue from a given characteristic, so called isosurfaces. These different application areas have given rise to solution approaches that all solve the problem of isocontouring in their own way. Based on the literature, the following four dominant methods can be identified: the marching cubes algorithms, the tessellation-based algorithms, the surface nets algorithms and the ray tracing algorithms. With regard to their application, it can be seen that the methods are mainly used in the fields of medical imaging, computer graphics and the visualization of simulation results. In our work, we provide a broad and compact overview of the common methods that are currently used in terms of isocontouring with respect to certain criteria and their individual limitations. In this context, we discuss the individual methods and identify possible future research directions in the field of isocontouring.
Background: Assistive Robotic Arms are designed to assist physically disabled people with daily activities. Existing joysticks and head controls are not applicable for severely disabled people such as people with Locked-in Syndrome. Therefore, eye tracking control is part of ongoing research. The related literature spans many disciplines, creating a heterogeneous field that makes it difficult to gain an overview.
Objectives: This work focuses on ARAs that are controlled by gaze and eye movements. By answering the research questions, this paper provides details on the design of the systems, a comparison of input modalities, methods for measuring the performance of these controls, and an outlook on research areas that gained interest in recent years.
Methods: This review was conducted as outlined in the PRISMA 2020 Statement. After identifying a wide range of approaches in use the authors decided to use the PRISMA-ScR extension for a scoping review to present the results. The identification process was carried out by screening three databases. After the screening process, a snowball search was conducted.
Results: 39 articles and 6 reviews were included in this article. Characteristics related to the system and study design were extracted and presented divided into three groups based on the use of eye tracking.
Conclusion: This paper aims to provide an overview for researchers new to the field by offering insight into eye tracking based robot controllers. We have identified open questions that need to be answered in order to provide people with severe motor function loss with systems that are highly useable and accessible.
Socially assistive robots (SARs) are becoming more prevalent in everyday life, emphasizing the need to make them socially acceptable and aligned with users' expectations. Robots' appearance impacts users' behaviors and attitudes towards them. Therefore, product designers choose visual qualities to give the robot a character and to imply its functionality and personality. In this work, we sought to investigate the effect of cultural differences on Israeli and German designers' perceptions of SARs' roles and appearance in four different contexts: a service robot for an assisted living/retirement residence facility, a medical assistant robot for a hospital environment, a COVID-19 officer robot, and a personal assistant robot for domestic use. The key insight is that although Israeli and German designers share similar perceptions of visual qualities for most of the robotics roles, we found differences in the perception of the COVID-19 officer robot's role and, by that, its most suitable visual design. This work indicates that context and culture play a role in users' perceptions and expectations; therefore, they should be taken into account when designing new SARs for diverse contexts.
Der Online-Handel verzeichnet seit Jahren ein stetiges Wachstum. Durch die COVID-19-Pandemie kaufen nun auch Nutzende, die zuvor physische Kanäle bevorzugten, vermehrt online ein. Der Anbietererfolg hängt dabei wesentlich von der Kenntnis über die Kund*innen ab. Allerdings dominieren einige große Anbieter den Markt, während kleinere Online-Shops Schwierigkeiten haben, ihre Angebote zu personalisieren. Eine Lösung bietet der Ansatz selbstbestimmter Identitäten. Dieser ermöglicht Kund*innen, ihre eigenen Shoppingdaten zu kontrollieren und sie selektiv mit Online-Shops zu teilen. Dadurch können individuelle Wünsche und Anforderungen der Kund*innen in Online-Shops berücksichtigt und ein personalisiertes Angebot sowie eine gute Nutzungserfahrung geboten werden. Trotz des großen Potenzials selbstbestimmter Identitäten ist der Ansatz in Deutschland kaum verbreitet. Dieser Beitrag beleuchtet den Einsatz selbstbestimmter Identitäten im Online-Handel. Mithilfe eines menschenzentrierten Gestaltungsprozesses wurden Personas und Ist-Szenarien erstellt, sowie daraus resultierend Anforderungen erhoben und Potenziale identifiziert. Auf Basis dessen konnte ein Daten- und Architekturmodell zur Integration von selbstbestimmten Identitäten im Online-Handel entwickelt werden.
This report examines exporters’ challenges and possible solutions for public intervention to promote foreign trade. Based on fieldwork conducted in Georgia, we explore which policy approaches can help to stimulate Georgian exports further. Our outcomes show that exporters face substantial barriers such as navigating complex trade regulations, lack of knowledge about target markets, trade finance gaps, as well as new export promotion programs (EPPs) in competitor countries. Other upper-middle-income countries can learn from our results that exporters can significantly benefit from a comprehensive export promotion strategy combined with an ecosystem-based “team” approach. EPPs related to awareness and capacity building in Georgia should be part of this strategy, focusing on challenges such as a lack of knowledge about trade practices and international business skills. Other EPPs must help to mitigate related market failures, as information gathering is costly, and firms have no incentive to share this information with competitors. Furthermore, targeted marketing support and customer matchmaking can answer Georgian exporters’ challenges, such as lack of market access and low sector visibility. Our results also show that public intervention through financial support and risk mitigation is essential for firms with an international orientation. The high-quality, rich outcomes provide significant value for other upper-middle-income countries by exploring the example of Georgia’s contemporary circumstances in an in-depth manner based on extensive interviews and document analysis. Limitations include that our work primarily relies on qualitative data and further research could involve a quantitative study with a diverse range of sectors.
Batteries typically consist of multiple individual cells connected in series. Here we demonstrate single-cell state of charge (SOC) and state of health (SOH) diagnosis in a 24 V class lithium-ion battery. To this goal, we introduce and apply a novel, highly efficient algorithm based on a voltage-controlled model (VCM). The battery, consisting of eight single cells, is cycled over a duration of five months under a simple cycling protocol between 20 % and 100 % SOC. The cell-to-cell standard deviations obtained with the novel algorithm were 1.25 SOC-% and 1.07 SOH-% at beginning of cycling. A cell-averaged capacity loss of 9.9 % after five months cycling was observed. While the accuracy of single-cell SOC estimation was limited (probably owed to the flat voltage characteristics of the lithium iron phosphate, LFP, chemistry investigated here), single-cell SOH estimation showed a high accuracy (2.09 SOH-% mean absolute error compared to laboratory reference tests). Because the algorithm does not require observers, filters, or neural networks, it is computationally very efficient (three seconds analysis time for the complete data set consisting of eight cells with approx. 780.000 measurement points per cell).
This paper presents a streaming-based E-Learning environment where closer integration between learning and work is achieved by integrating multimedia services into manufacturing processes. It contains a comprehensive and detailed explanation of the proposed E-Learning streaming framework, especially the adaption of streaming services to mobile environments. We first analyze several scenarios where E-Learning streaming services can be integrated into manufacturing processes. To allow systematic and tailor-made integration, we develop a model and a specification language for E-Learning streaming services and apply the model using practical scenarios from real manufacturing processes. Adaption of multimedia streaming services to mobile devices is discussed based on Synchronized Multimedia Integration Language (SMIL). Last, we comment on the benefits of using E-Learning streaming services as part of manufacturing processes and analyze the acceptance of the developed system. The key components of our E-Learning environment are 1) an xml based streaming service specification language, 2) adaption of multimedia E-Learning services to mobile environments, and 3) Web Services for searching, registration, and creation of E-Learning streaming services.
Introduction: Subjects with mild to moderate hearing loss today often receive hearing aids (HA) with open-fitting (OF). In OF, direct sound reaches the eardrums with minimal damping. Due to the required processing delay in digital HA, the amplified HA sound follows some milliseconds later. This process occurs in both ears symmetrically in bilateral HA provision and is likely to have no or minor detrimental effect on binaural hearing. However, the delayed and amplified sound are only present in one ear in cases of unilateral hearing loss provided with one HA. This processing alters interaural timing differences in the resulting ear signals.
Methods: In the present study, an experiment with normal-hearing subjects to investigate speech intelligibility in noise with direct and delayed sound was performed to mimic unilateral and bilateral HA provision with OF.
Results: The outcomes reveal that these delays affect speech reception thresholds (SRT) in the unilateral OF simulation when presenting speech and noise from different spatial directions. A significant decrease in the median SRT from –18.1 to –14.7 dB SNR is observed when typical HA processing delays are applied. On the other hand, SRT was independent of the delay between direct and delayed sound in the bilateral OF simulation.
Discussion: The significant effect emphasizes the development of rapid processing algorithms for unilateral HA provision.
There is an ongoing debate about the use and scope of Clayton M. Christensen´s idea of disruptive innovation, including the question of whether it is a management buzz phrase or a valuable theory. This discussion considers the general question of how innovation in the field of management theories and concepts finds its way to the different target groups. This conceptual paper combines the different concepts of the creation and dissemination of management trends in a basic framework based on a short review of models for the dissemination of management ideas. This framework allows an analysis of the character of new management ideas like disruptive innovation. By measuring the impact of the theory on the academic sphere using a bibliometric statistic of the number of academic publications on Google scholar and Scopus and a meta-analysis of research papers, we show the significant influence of disruptive innovation beyond pure management fads.
We revisit the quantitative analysis of the ultrafast magnetoacoustic experiment in a freestanding nickel thin film by Kim and Bigot [J.-W. Kim and J.-Y. Bigot, Phys. Rev. B 95, 144422 (2017)] by applying our recently proposed approach of magnetic and acoustic eigenmode decomposition. We show that the application of our modeling to the analysis of time-resolved reflectivity measurements allows for the determination of amplitudes and lifetimes of standing perpendicular acoustic phonon resonances with unprecedented accuracy. The acoustic damping is found to scale as ∝ω2 for frequencies up to 80 GHz, and the peak amplitudes reach 10−3. The experimentally measured magnetization dynamics for different orientations of an external magnetic field agrees well with numerical solutions of magnetoelastically driven magnon harmonic oscillators. Symmetry-based selection rules for magnon-phonon interactions predicted by our modeling approach allow for the unambiguous discrimination between spatially uniform and nonuniform modes, as confirmed by comparing the resonantly enhanced magnetoelastic dynamics simultaneously measured on opposite sides of the film. Moreover, the separation of timescales for (early) rising and (late) decreasing precession amplitudes provide access to magnetic (Gilbert) and acoustic damping parameters in a single measurement.
The utilisation of artificial intelligence (AI) is progressively emerging as a significant mechanism for innovation in human resource management (HRM). The capacity to facilitate the transformation of employee performance across numerous responsibilities. AI development, there remains a dearth of comprehensive exploration into the potential opportunities it presents for enhancing workplace performance among employees. To bridge this gap in knowledge, the present work carried out a survey with 300 participants, utilises a fuzzy set-theoretic method that is grounded on the conceptualisation of AI, KS, and HRM. The findings of our study indicate that the exclusive adoption of AI technologies does not adequately enhance HRM engagements. In contrast, the integration of AI and KS offers a more viable HRM approach for achieving optimal performance in a dynamic digital society. This approach has the potential to enhance employees’ proficiency in executing their responsibilities and cultivate a culture of creativity inside the firm.
Recently, photovoltaic (PV) with energy storage systems (ESS) have been widely adopted in buildings to overcome growing power demands and earn financial benefits. The overall energy cost can be optimized by combining a well-sized hybrid PV/ESS system with an efficient energy management system (EMS). Generally, EMS is implemented within the overall functions of the Building Automation System (BAS). However, due to its limited computing resources, BAS cannot handle complex algorithms that aim to optimize energy use in real-time under different operating conditions. Furthermore, islanding the building's local network to maximize the PV energy share represents a challenging task due to the potential technical risks. In this context, this article addresses an improved approach based on upgrading the BAS data analytics capability by means of an edge computing technology. The edge communicates with the BAS low-level controller using a serial communication protocol. Taking advantage of the high computing ability of the edge device, an optimization-based EMS of the PV/ESS hybrid system is implemented. Different testing scenarios have been carried out on a real prototype with different weather conditions, and the results show the implementation feasibility and technical performance of such advanced EMS for the management of building energy resources. It has also been proven to be feasible and advantageous to operate the local energy network in island mode while ensuring system safety. Additionally, an estimated energy saving improvement of 6.23 % has been achieved using optimization-based EMS compared to the classical rule-based EMS, with better ESS constraints fulfillment.
For the treatment of bone defects, biodegradable, compressive biomaterials are needed as replacements that degrade as the bone regenerates. The problem with existing materials has either been their insufficient mechanical strength or the excessive differences in their elastic modulus, leading to stress shielding and eventual failure. In this study, the compressive strength of CPC ceramics (with a layer thickness of more than 12 layers) was compared with sintered β-TCP ceramics. It was assumed that as the number of layers increased, the mechanical strength of 3D-printed scaffolds would increase toward the value of sintered ceramics. In addition, the influence of the needle inner diameter on the mechanical strength was investigated. Circular scaffolds with 20, 25, 30, and 45 layers were 3D printed using a 3D bioplotter, solidified in a water-saturated atmosphere for 3 days, and then tested for compressive strength together with a β-TCP sintered ceramic using a Zwick universal testing machine. The 3D-printed scaffolds had a compressive strength of 41.56 ± 7.12 MPa, which was significantly higher than that of the sintered ceramic (24.16 ± 4.44 MPa). The 3D-printed scaffolds with round geometry reached or exceeded the upper limit of the compressive strength of cancellous bone toward substantia compacta. In addition, CPC scaffolds exhibited more bone-like compressibility than the comparable β-TCP sintered ceramic, demonstrating that the mechanical properties of CPC scaffolds are more similar to bone than sintered β-TCP ceramics.
Background/Purpose
Several methods are used to evaluate the outcome of total hip arthroplasty (THA), however, their relationship at different time points after surgery is unclear. The purpose of this exploratory study was to investigate correlations between self-report function, performance-based tests (PBTs) and biomechanical parameters in patients 12 months after THA.
Methods
Eleven patients were included in this preliminary cross-sectional study. Hip disability and Osteoarthritis Outcome Score (HOOS) was completed for self-reported function. As PBTs, the Timed-up-and-Go test (TUG) and 30-Second-Chair-Stand test (30CST) were used. Biomechanical parameters were derived from analyses of hip strength, gait and balance. Potential correlations were calculated using Spearman correlation coefficient r.
Results
HOOS scores and parameters of PBTs showed moderate to strong correlations (0.3 < r < 0.7). Correlation analysis between HOOS scores and biomechanical parameters revealed moderate to strong correlations for hip strength whereas correlations with gait parameters and balance were rather weak (r < 0.3). Moderate to strong correlations were also found between parameters of hip strength and 30CST.
Conclusion
For THA outcome assessment 12 months after surgery, our first results indicate that self-report measures or PBTs could be used. Analysis of hip strength also appears to be reflected in HOOS and PBT parameters and may be considered as an adjunct. Given the weak correlations with gait and balance parameters, we suggest that gait analysis and balance testing should be performed in addition to PROMs and PBTs as they may provide supplementary information, especially for THA patients that are at risk for falls.
Blockchain interoperability: the state of heterogenous blockchain-to-blockchain communication
(2023)
Blockchain technology has been increasingly adopted over the past few years since the introduction of Bitcoin, with several blockchain architectures and solutions being proposed. Most proposed solutions have been developed in isolation, without a standard protocol or cryptographic structure to work with. This has led to the problem of interoperability, where solutions running on different blockchain platforms are unable to communicate, limiting the scope of use. With blockchains being adopted in a variety of fields such as the Internet of Things, it is expected that the problem of interoperability if not addressed quickly, will stifle technology advancement. This paper presents the current state of interoperability solutions proposed for heterogenous blockchain systems. A look is taken at interoperability solutions, not only for cryptocurrencies, but also for general data-based use cases. Current open issues in heterogenous blockchain interoperability are presented. Additionally, some possible research directions are presented to enhance and to extend the existing blockchain interoperability solutions. It was discovered that though there are a number of proposed solutions in literature, few have seen real-world implementation. The lack of blockchain-specific standards has slowed the progress of interoperability. It was also realized that most of the proposed solutions are developed targeting cryptocurrency-based applications.
This paper presents an overview of EREMI, a two-year project funded under ERASMUS+ KA203, and its results. The project team’s main objective was to develop and validate an advanced interdisciplinary higher education curriculum, which includes lifelong learning components. The curriculum focuses on enhancing resource efficiency in the manufacturing industry and optimising poorly or non-digitised industrial physical infrastructure systems. The paper also discusses the results of the project, highlighting the successful achievement of its goals. EREMI effectively supports the transition to Industry 5.0 by preparing a common European pool of future experts. Through comprehensive research and collaboration, the project team has designed a curriculum that equips students with the necessary skills and knowledge to thrive in the evolving manufacturing landscape. Furthermore, the paper explores the significance of EREMI’s contributions to the field, emphasising the importance of resource efficiency and system optimisation in industrial settings. By addressing the challenges posed by under-digitised infrastructure, the project aims to drive sustainable and innovative practices in manufacturing. All five project partner organisations have been actively engaged in offering relevant educational content and framework for decentralised sustainable economic development in regional and national contexts through capacity building at a local level. A crucial element of the added value is the new channel for obtaining feedback from students. The survey results, which are outlined in the paper, offer valuable insights gathered from students, contributing to the continuous improvement of the project.
The article investigates the development of a manufacturing route for highly porous titanium foams suitable for craniofacial surgery applications, particularly in cranioplasties. The study focuses on the polyurethane replication method for foam production and emphasizes reducing residual gas content, as it significantly affects the mechanical properties and suitability for approval of the foams. Various factors such as starting materials, solvent debinding, heating schedules, and hydrogen atmosphere are analyzed for their impact on residual gas content. It is shown that significant reductions in residual gas content can only be achieved by reworking each step of the process. A combination of initial solvent debinding of the PU template with dimethyl sulphoxide, reduction of suspension additives, use of coarser Gd. 1 powders, and an integrated debinding and sintering process under partial hydrogen atmosphere achieves a significant reduction in residual gas content. This way, the potential for producing titanium foams that comply with relevant standards for craniofacial implants is demonstrated.
Heat pumps play a central role in decarbonizing the heat supply of buildings. However, in this article, implementing heat pumps in existing buildings, a significant challenge is still presented due to high temperature requirements. In this article, a systematic analysis of the effects of heat source temperatures, maximum heat pump condenser temperatures, and system temperatures on the seasonal performance of heat pump (HP) systems is presented. The quantitative performance analysis encompasses over 50 heat pumps installed in residential buildings, revealing correlations between the building characteristics, observed temperatures, and heat pump type. The performance of an HP system retrofitted to a 30-dwelling multifamily building is presented in more detail. The bivalent HP system combines air and ground as heat sources and achieves a seasonal performance factor of 3.25 with a share of the gas boiler of 27% in its first year of operation. In these findings, the technical feasibility of retrofitting heat pumps is demonstrated in existing buildings and insights are provided into overcoming the challenges associated with high temperature requirements.
Lithium-ion batteries exhibit slow voltage dynamics on the minute time scale that are usually associated with transport processes. We present a novel modelling approach toward these dynamics by combining physical and data-driven models into a Grey-box model. We use neural networks, in particular neural ordinary differential equations. The physical structure of the Grey-box model is borrowed from the Fickian diffusion law, where the transport domain is discretized using finite volumes. Within this physical structure, unknown parameters (diffusion coefficient, diffusion length, discretization) and dependencies (state of charge, lithium concentration) are replaced by neural networks and learnable parameters. We perform model-to-model comparisons, using as training data (a) a Fickian diffusion process, (b) a Warburg element, and (c) a resistor-capacitor circuit. Voltage dynamics during constant-current operation and pulse tests as well as electrochemical impedance spectra are simulated. The slow dynamics of all three physical models in the order of ten to 30 min are well captured by the Grey-box model, demonstrating the flexibility of the present approach.
A novel peptidyl-lys metalloendopeptidase (Tc-LysN) from Tramates coccinea was recombinantly expressed in Komagataella phaffii using the native pro-protein sequence. The peptidase was secreted into the culture broth as zymogen (~38 kDa) and mature enzyme (~19.8 kDa) simultaneously. The mature Tc-LysN was purified to homogeneity with a single step anion-exchange chromatography at pH 7.2. N-terminal sequencing using TMTpro Zero and mass spectrometry of the mature Tc-LysN indicated that the pro-peptide was cleaved between the amino acid positions 184 and 185 at the Kex2 cleavage site present in the native pro-protein sequence. The pH optimum of Tc-LysN was determined to be 5.0 while it maintained ≥60% activity between pH values 4.5—7.5 and ≥30% activity between pH values 8.5—10.0, indicating its broad applicability. The temperature maximum of Tc-LysN was determined to be 60 °C. After 18 h of incubation at 80 °C, Tc-LysN still retained ~20% activity. Organic solvents such as methanol and acetonitrile, at concentrations as high as 40% (v/v), were found to enhance Tc-LysN’s activity up to ~100% and ~50%, respectively. Tc-LysN’s thermostability, ability to withstand up to 8 M urea, tolerance to high concentrations of organic solvents, and an acidic pH optimum make it a viable candidate to be employed in proteomics workflows in which alkaline conditions might pose a challenge. The nano-LC-MS/MS analysis revealed bovine serum albumin (BSA)’s sequence coverage of 84% using Tc-LysN which was comparable to the sequence coverage of 90% by trypsin peptides.
In der Geschichte »Die Schule« (Originaltitel: ,,The fun they had“) von 1954 beschreibt der russisch-amerikanische Wissenschaftler und Science fiction Autor Isaac Asimov, wie die Schule der Zukunft im Jahr 2157 aussieht – oder genauer: dass es gar keine Schulen mehr gibt. Jedes Kind hat neben seinem Kinderzimmer im Elternhaus einen kleinen Schulraum, in dem es von einem mechanischen Lehrer (einer Maschine mit Bildschirm und einem Schlitz zum Einwerfen der Hausaufgaben) unterrichtet wird. Diese Lehrmaschine ist perfekt auf die Fähigkeiten des einzelnen Kindes eingestellt und kann es optimal beschulen. Nur: Maschinen können kaputt gehen. Die elfjährige Margie wird von ihrem mechanischen Lehrer wieder und wieder in Geographie abgefragt, aber jedes Mal schlechter benotet. Das sieht die Mutter und ruft den Schulinspektor, um den mechanischen Lehrer zu reparieren.
This article presents the development, parameterization, and experimental validation of a pseudo-three-dimensional (P3D) multiphysics aging model of a 500 mAh high-energy lithium-ion pouch cell with graphite negative electrode and lithium nickel manganese cobalt oxide (NMC) positive electrode. This model includes electrochemical reactions for solid electrolyte interphase (SEI) formation at the graphite negative electrode, lithium plating, and SEI formation on plated lithium. The thermodynamics of the aging reactions are modeled depending on temperature and ion concentration and the reactions kinetics are described with an Arrhenius-type rate law. Good agreement of model predictions with galvanostatic charge/discharge measurements and electrochemical impedance spectroscopy is observed over a wide range of operating conditions. The model allows to quantify capacity loss due to cycling near beginning-of-life as function of operating conditions and the visualization of aging colormaps as function of both temperature and C-rate (0.05 to 2 C charge and discharge, −20 °C to 60 °C). The model predictions are also qualitatively verified through voltage relaxation, cell expansion and cell cycling measurements. Based on this full model, six different aging indicators for determination of the limits of fast charging are derived from post-processing simulations of a reduced, pseudo-two-dimensional isothermal model without aging mechanisms. The most successful aging indicator, compared to results from the full model, is based on combined lithium plating and SEI kinetics calculated from battery states available in the reduced model. This methodology is applicable to standard pseudo-two-dimensional models available today both commercially and as open source.
Im Automobilbau bietet der Einsatz der Multimaterialbauweise ein signifikantes Potenzial zur Gewichtsreduktion. Zugleich erfordert diese Bauweise eine große Anzahl von Fügeverfahren für die Verbindung der unterschiedlichen Werkstoffe und Werkstoffklassen. Dabei muss eine Vielzahl an konstruktiven und materialseitigen Anforderungen berücksichtigt werden. Um in diesem Auswahlprozess den Aspekt des Leichtbaus beim Fügeverfahren selbst systematisch zu integrieren, wurde eine Methodik entwickelt, welche die Fügeverfahren im Hinblick auf ihr jeweiliges Leichtbaupotenzial bewertet.
Design and Implementation of a Camera-Based Tracking System for MAV Using Deep Learning Algorithms
(2023)
In recent years, the advancement of micro-aerial vehicles has been rapid, leading to their widespread utilization across various domains due to their adaptability and efficiency. This research paper focuses on the development of a camera-based tracking system specifically designed for low-cost drones. The primary objective of this study is to build up a system capable of detecting objects and locating them on a map in real time. Detection and positioning are achieved solely through the utilization of the drone’s camera and sensors. To accomplish this goal, several deep learning algorithms are assessed and adopted because of their suitability with the system. Object detection is based upon a single-shot detector architecture chosen for maximum computation speed, and the tracking is based upon the combination of deep neural-network-based features combined with an efficient sorting strategy. Subsequently, the developed system is evaluated using diverse metrics to determine its performance for detection and tracking. To further validate the approach, the system is employed in the real world to show its possible deployment. For this, two distinct scenarios were chosen to adjust the algorithms and system setup: a search and rescue scenario with user interaction and precise geolocalization of missing objects, and a livestock control scenario, showing the capability of surveying individual members and keeping track of number and area. The results demonstrate that the system is capable of operating in real time, and the evaluation verifies that the implemented system enables precise and reliable determination of detected object positions. The ablation studies prove that object identification through small variations in phenotypes is feasible with our approach.
Phytases are widely used food and feed enzymes to improve phosphate availability and reduce anti-nutritional factors. Despite the benefits, enzyme usage is restricted by the harsh conditions in a gastrointestinal tract (pH 2–6) and feed pelleting conditions at high temperatures (60–90 °C). The commercially available phytase Quantum® Blue has been immobilized as CLEAs using glutardialdehyde and soy protein resulting in a residual activity of 33%. The influence of the precipitating agent, precipitant concentration, cross-linker concentration and cross-linking time, sodium borohydride as well as the proteic feeders gluten, soy protein and bovine serum albumin (BSA) has been optimized. The best conditions were 90% (v/v) ethyl lactate as precipitating reagent, 100 mM glutardialdehyde and a soy protein concentration of 227 mg/L with a cross-linking time of 1 h. The intrinsically stable phytase remained its high thermal stability and temperature optimum. The phytase-CLEA achieved a 425% increase of residual activity under harsh acidic conditions between pH 2.2 and 3.5 compared to the free enzyme. The free and immobilized phytase were deployed in an in vitro assay simulating the acidic conditions in the gizzard of poultry at pH 2. The hydrolysis of phytate was monitored using a novel high-performance thin-layer chromatography (HPTLC) analysis and DAD scanner to study the InsPx fingerprint. All lower inositol phosphate pools (InsP1–InsP6) and free phosphate were separated and analyzed. The phytase-CLEA efficiently released 80% of the total phosphate within 180 min, whereas the free enzyme only released 6% in the same time under the same conditions.
In the framework of electro-elasticity theory and the finite element method (FEM), a model is set up for the computation of quantities in surface acoustic wave (SAW) devices accounting for nonlinear effects. These include second-order and third-order intermodulations, second and third harmonic generation and the influence of electro-acoustic nonlinearity on the frequency characteristics of SAW resonators. The model is based on perturbation theory, and requires input material constants, e.g., the elastic moduli up to fourth order for all materials involved. The model is two-dimensional, corresponding to an infinite aperture, but all three Cartesian components of the displacement and electrical fields are accounted for. The first version of the model pertains to an infinite periodic arrangement of electrodes. It is subsequently generalized to systems with a finite number of electrodes. For the latter version, a recursive algorithm is presented which is related to the cascading scheme of Plessky and Koskela and strongly reduces computation time and memory requirements. The model is applied to TC-SAW systems with copper electrodes buried in an oxide film on a LiNbO3 substrate. Results of computations are presented for the electrical current due to third-order intermodulations and the displacement field associated with the second harmonic and second-order intermodulations, generated by monochromatic input tones. The scope of this review is limited to methodological aspects with the goal to enable calculations of nonlinear quantities in SAW devices on inexpensive and easily accessible computing platforms.
An in-depth study of U-net for seismic data conditioning: Multiple removal by moveout discrimination
(2024)
Seismic processing often involves suppressing multiples that are an inherent component of collected seismic data. Elaborate multiple prediction and subtraction schemes such as surface-related multiple removal have become standard in industry workflows. In cases of limited spatial sampling, low signal-to-noise ratio, or conservative subtraction of the predicted multiples, the processed data frequently suffer from residual multiples. To tackle these artifacts in the postmigration domain, practitioners often rely on Radon transform-based algorithms. However, such traditional approaches are both time-consuming and parameter dependent, making them relatively complex. In this work, we present a deep learning-based alternative that provides competitive results, while reducing the complexity of its usage, and, hence simplifying its applicability. Our proposed model demonstrates excellent performance when applied to complex field data, despite it being exclusively trained on synthetic data. Furthermore, extensive experiments show that our method can preserve the inherent characteristics of the data, avoiding undesired oversmoothed results, while removing the multiples from seismic offset or angle gathers. Finally, we conduct an in-depth analysis of the model, where we pinpoint the effects of the main hyperparameters on real data inference, and we probabilistically assess its performance from a Bayesian perspective. In this study, we put particular emphasis on helping the user reveal the inner workings of the neural network and attempt to unbox the model.
Seismic data processing involves techniques to deal with undesired effects that occur during acquisition and pre-processing. These effects mainly comprise coherent artefacts such as multiples, non-coherent signals such as electrical noise, and loss of signal information at the receivers that leads to incomplete traces. In the past years, there has been a remarkable increase of machine-learning-based solutions that have addressed the aforementioned issues. In particular, deep-learning practitioners have usually relied on heavily fine-tuned, customized discriminative algorithms. Although, these methods can provide solid results, they seem to lack semantic understanding of the provided data. Motivated by this limitation, in this work, we employ a generative solution, as it can explicitly model complex data distributions and hence, yield to a better decision-making process. In particular, we introduce diffusion models for three seismic applications: demultiple, denoising and interpolation. To that end, we run experiments on synthetic and on real data, and we compare the diffusion performance with standardized algorithms. We believe that our pioneer study not only demonstrates the capability of diffusion models, but also opens the door to future research to integrate generative models in seismic workflows.
Neural networks tend to overfit the training distribution and perform poorly on out-ofdistribution data. A conceptually simple solution lies in adversarial training, which introduces worst-case perturbations into the training data and thus improves model generalization to some extent. However, it is only one ingredient towards generally more robust models and requires knowledge about the potential attacks or inference time data corruptions during model training. This paper focuses on the native robustness of models that can learn robust behavior directly from conventional training data without out-of-distribution examples. To this end, we study the frequencies in learned convolution filters. Clean-trained models often prioritize high-frequency information, whereas adversarial training enforces models to shift the focus to low-frequency details during training. By mimicking this behavior through frequency regularization in learned convolution weights, we achieve improved native robustness to adversarial attacks, common corruptions, and other out-of-distribution tests. Additionally, this method leads to more favorable shifts in decision-making towards low-frequency information, such as shapes, which inherently aligns more closely with human vision.
Predictive control has great potential in the home energy management domain. However, such controls need reliable predictions of the system dynamics as well as energy consumption and generation, and the actual implementation in the real system is associated with many challenges. This paper presents the implementation of predictive controls for a heat pump with thermal storage in a real single-family house with a photovoltaic rooftop system. The predictive controls make use of a novel cloud camera-based short-term solar energy prediction and an intraday prediction system that includes additional data sources. In addition, machine learning methods were used to model the dynamics of the heating system and predict loads using extensive measured data. The results of the real and simulated operation will be presented.
Novel approaches for the design of assistive technology controls propose the usage of eye tracking devices such as for smart wheelchairs and robotic arms. The advantages of artificial feedback, especially vibrotactile feedback, as opposed to their use in prostheses, have not been sufficiently explored. Vibrotactile feedback reduces the cognitive load on the visual and auditory channel. It provides tactile sensation, resulting in better use of assistive technologies. In this study the impact of vibration on the precision and accuracy of a head-worn eye tracking device is investigated. The presented system is suitable for further research in the field of artificial feedback. Vibration was perceivable for all participants, yet it does not produce any significant deviations in precision and accuracy.
Purpose
To (1) identify neuromuscular and biomechanical injury risk factors in elite youth soccer players and (2) assess the predictive ability of a machine learning approach.
Material and Methods
Fifty-six elite male youth soccer players (age: 17.2 ± 1.1 years; height: 179 ± 8 cm; mass: 70.4 ± 9.2 kg) performed a 3D motion analysis, postural control testing, and strength testing. Non-contact lower extremities injuries were documented throughout 10 months. A least absolute shrinkage and selection operator (LASSO) regression model was used to identify the most important injury predictors. Predictive performance of the LASSO model was determined in a leave-one-out (LOO) prediction competition.
Results
Twenty-three non-contact injuries were registered. The LASSO model identified concentric knee extensor peak torque, hip transversal plane moment in the single-leg drop landing task and center of pressure sway in the single-leg stance test as the three most important predictors for injury in that order. The LASSO model was able to predict injury outcomes with a likelihood of 58% and an area under the ROC curve of 0.63 (sensitivity = 35%; specificity = 79%).
Conclusion
The three most important variables for predicting the injury outcome suggest the importance of neuromuscular and biomechanical performance measures in elite youth soccer. These preliminary results may have practical implications for future directions in injury risk screening and planning, as well as for the development of customized training programs to counteract intrinsic injury risk factors. However, the poor predictive performance of the final model confirms the challenge of predicting sports injuries, and the model must therefore be evaluated in larger samples.
Background
Internal tibial loading is influenced by modifiable factors with implications for the risk of stress injury. Runners encounter varied surface steepness (gradients) when running outdoors and may adapt their speed according to the gradient. This study aimed to quantify tibial bending moments and stress at the anterior and posterior peripheries when running at different speeds on surfaces of different gradients.
Methods
Twenty recreational runners ran on a treadmill at 3 different speeds (2.5 m/s, 3.0 m/s, and 3.5 m/s) and gradients (level: 0%; uphill: +5%, +10%, and +15%; downhill: –5%, –10%, and –15%). Force and marker data were collected synchronously throughout. Bending moments were estimated at the distal third centroid of the tibia about the medial–lateral axis by ensuring static equilibrium at each 1% of stance. Stress was derived from bending moments at the anterior and posterior peripheries by modeling the tibia as a hollow ellipse. Two-way repeated-measures analysis of variance were conducted using both functional and discrete statistical analyses.
Results
There were significant main effects for running speed and gradient on peak bending moments and peak anterior and posterior stress. Higher running speeds resulted in greater tibial loading. Running uphill at +10% and +15% resulted in greater tibial loading than level running. Running downhill at –10% and –15% resulted in reduced tibial loading compared to level running. There was no difference between +5% or –5% and level running.
Conclusion
Running at faster speeds and uphill on gradients ≥+10% increased internal tibial loading, whereas slower running and downhill running on gradients ≥–10% reduced internal loading. Adapting running speed according to the gradient could be a protective mechanism, providing runners with a strategy to minimize the risk of tibial stress injuries.
Photovoltaic-heat pump (PV-HP) combinations with battery and energy management systems are becoming increasingly popular due to their ability to increase the autarchy and utilization of self-generated PV electricity. This trend is driven by the ongoing electrification of the heating sector and the growing disparity between growing electricity costs and reducing feed-in tariffs in Germany. Smart control strategies can be employed to control and optimize the heat pump operation to achieve higher self-consumption of PV electricity. This work presents the evaluation results of a smart-grid ready controlled PV-HP-battery system in a single-family household in Germany, using 1-minute-high-resolution field measurement data. Within 12 months evaluation period, a self-consumption of 43% was determined. The solar fraction of the HP amounts to 36%, enabled also due to higher set temperatures for space heating and domestic hot water production. Accordingly, the SPF decreases by 4.0% the space heating and by 5.7% in the domestic hot water mode. The combined seasonal performance factor for the heat pump system increases from 4.2 to 6.7, when only considering the electricity taken from the grid and disregarding the locally generated electricity supplied from photovoltaic and battery units.
Photovoltaic thermal (PVT) technology has been drawing attention recently. Electrification of the heating sector with heat pumps run by carbon-free electricity sources like photovoltaics is setting the ground for the interest. This article gives insight into PVT technologies and collector designs according to application and operating temperatures. For most conventional designs, examples like prototypes from Research & Development projects are presented. In addition, commercial products are listed along these categories, and the influence on the gross thermal and electrical yield is depicted based on Solar Keymark certification data. The process of certification is presented in a comprehensive way, showing current limitations, giving an outlook on the most recent approach for enhanced procedures and specifications. Finally, different system layouts are presented, and examples from installations combined with a heat pump are given with their specific performances. Real performance data of several PVT installations are compared to conventional heat pump systems. The identified seasonal performance factors are in a range from 3.4 to 4.2 and in between air source and ground source heat pumps. Continuous monitoring and derived data are enablers to discover the decisive influence of the system layout and dimensioning on performance indicators like, for example, operating temperatures over the year.
Purpose
To summarize the mechanical loading of the spine in different activities of daily living and sports.
Methods
Since the direct measurement is not feasible in sports activities, a mathematical model was applied to quantify spinal loading of more than 600 physical tasks in more than 200 athletes from several sports disciplines. The outcome is compression and torque (normalized to body weight/mass) at L4/L5.
Results
The data demonstrate high compressive forces on the lumbar spine in sport-related activities, which are much higher than forces reported in normal daily activities and work tasks. Especially ballistic jumping and landing skills yield high estimated compression at L4/L5 of more than ten times body weight. Jumping, landing, heavy lifting and weight training in sports demonstrate compression forces significantly higher than guideline recommendations for working tasks.
Conclusion
These results may help to identify acute and long-term risks of low back pain and, thus, may guide the development of preventive interventions for low back pain or injury in athletes.
Appraising the Methodological Quality of Sports Injury Video Analysis Studies: The QA-SIVAS Scale
(2023)
Background
Video analysis (VA) is commonly used in the assessment of sports injuries and has received considerable research interest. Until now, no tool has been available for the assessment of study quality. Therefore, the objective of this study was to develop and evaluate a valid instrument that reliably assesses the methodological quality of VA studies.
Methods
The Quality Appraisal for Sports Injury Video Analysis Studies (QA-SIVAS) scale was developed using a modified Delphi approach including expert consensus and pilot testing. Reliability was examined through intraclass correlation coefficient (ICC3,1) and free-marginal kappa statistics by three independent raters. Construct validity was investigated by comparing QA-SIVAS with expert ratings by using Kendall’s tau analysis. Rating time was studied by applying the scale to 21 studies and computing the mean time for rating per study article.
Results
The QA-SIVAS scale consists of an 18-item checklist addressing the study design, data source, conduct, report, and discussion of VA studies in sports injury research. Inter- and intra-rater reliability were excellent with ICCs > 0.97. Expert ratings revealed a high construct validity (0.71; p < 0.001). Mean rating time was 10 ± 2 min per article.
Conclusion
QA-SIVAS is a reliable and valid instrument that can be easily applied to sports injury research. Future studies in the field of VA should adhere to standardized methodological criteria and strict quality guidelines.
The increasingly stringent CO2 emissions standards require innovative solutions in the vehicle development process. One possibility to reduce CO2 emissions is the electrification of powertrains. The resulting increased complexity, as well as the increased competition and time pressure make the use of simulation software and test benches indispensable in the early development phases. This publication therefore presents a methodology for test bench coupling to enable early testing of electrified powertrains. For this purpose, an internal combustion engine test bench and an electric motor test bench are virtually interconnected. By applying and extending the Distributed Co-Simulation Protocol Standard for the presented hybrid electric powertrain use case, real-time-capable communication between the two test benches is achieved. Insights into the test bench setups, and the communication between the test benches and the protocol extension, especially with regard to temperature measurements, enable the extension to be applied to other powertrain or test bench configurations. The shown results from coupled test bench operations emphasize the applicability. The discussed experiences from the test bench coupling experiments complete the insights.
Injury prevention is essential in running due to the risk of overuse injury development. Tailoring running shoes to individual needs may be a promising strategy to reduce this risk. Novel manufacturing processes allow the production of individualised running shoes that incorporate features that meet individual biomechanical and experiential needs. However, specific ways to individualise footwear to reduce injury risk are poorly understood. Therefore, this scoping review provides an overview of (1) footwear design features that have the potential for individualisation; and (2) the literature on the differential responses to footwear design features between selected groups of individuals. These purposes focus exclusively on reducing the risk of overuse injuries. We included studies in the English language on adults that analysed: (1) potential interaction effects between footwear design features and subgroups of runners or covariates (e.g., age, sex) for running-related biomechanical risk factors or injury incidences; (2) footwear comfort perception for a systematically modified footwear design feature. Most of the included articles (n = 107) analysed male runners. Female runners may be more susceptible to footwear-induced changes and overuse injury development; future research should target more heterogonous sampling. Several footwear design features (e.g., midsole characteristics, upper, outsole profile) show potential for individualisation. However, the literature addressing individualised footwear solutions and the potential to reduce biomechanical risk factors is limited. Future studies should leverage more extensive data collections considering relevant covariates and subgroups while systematically modifying isolated footwear design features to inform footwear individualisation.
With the function RooTri(), we present a simple and robust calculation method for the approximation of the intersection points of a scalar field given as an unstructured point cloud with a plane oriented arbitrarily in space. The point cloud is approximated to a surface consisting of triangles whose edges are used for computing the intersection points. The function contourc() of Matlab is taken as a reference. Our experiments show that the function contourc() produces outliers that deviate significantly from the defined nominal value, while the quality of the results produced by the function RooTri() increases with finer resolution of the examined grid.
Maintaining stability while walking on arbitrary surfaces or dealing with external perturbations is of great interest in humanoid robotics research. Increasing the system’s autonomous robustness to a variety of postural threats during locomotion is the key despite the need to evaluate noisy sensor signals. The equations of motion are the foundation of all published approaches. In contrast, we propose a more adequate evaluation of the equations of motion with respect to an arbitrary moving reference point in a non-inertial reference frame. Conceptual advantages are, e.g., getting independent of global position and velocity vectors estimated by sensor fusions or calculating the imaginary zero-moment point walking on different inclined ground surfaces. Further, we improve the calculation results by reducing noise-amplifying methods in our algorithm and using specific characteristics of physical robots. We use simulation results to compare our algorithm with established approaches and test it with experimental robot data.
Featherweight Generic Go (FGG) is a minimal core calculus modeling the essential features of the programming language Go. It includes support for overloaded methods, interface types, structural subtyping, and generics. The most straightforward semantic description of the dynamic behavior of FGG programs is to resolve method calls based on runtime type information of the receiver. This article shows a different approach by defining a type-directed translation from FGG− to an untyped lambda-calculus. FGG− includes all features of FGG but type assertions. The translation of an FGG− program provides evidence for the availability of methods as additional dictionary parameters, similar to the dictionary-passing approach known from Haskell type classes. Then, method calls can be resolved by a simple lookup of the method definition in the dictionary. Every program in the image of the translation has the same dynamic semantics as its source FGG− program. The proof of this result is based on a syntactic, step-indexed logical relation. The step index ensures a well-founded definition of the relation in the presence of recursive interface types and recursive methods. Although being non-deterministic, the translation is coherent.
In 4D printing, an additively manufactured component is given the ability to change its shape or function in an intended and useful manner over time. The technology of 4D printing is still in an early stage of development. Nevertheless, interesting research and initial applications exist in the literature. In this work, a novel methodical approach is presented that helps transfer existing 4D printing research results and knowledge into solving application tasks systematically. Moreover, two different smart materials are analyzed, used, and combined following the presented methodical approach to solving the given task in the form of recovering an object from a poorly accessible space. This is implemented by self-positioning, grabbing, and extracting the target object. The first smart material used to realize these tasks is a shape-memory polymer, while the second is a polymer-based magnetic composite. In addition to the presentation and detailed implementation of the methodical approach, the potentials and behavior of the two smart materials are further examined and narrowed down as a result of the investigation. The results show that the developed methodical approach contributes to moving 4D printing closer toward a viable alternative to existing technologies due to its problem-oriented nature.
Immunosorbent turnip vein clearing virus (TVCV) particles displaying the IgG-binding domains D and E of Staphylococcus aureus protein A (PA) on every coat protein (CP) subunit (TVCVPA) were purified from plants via optimized and new protocols. The latter used polyethylene glycol (PEG) raw precipitates, from which virions were selectively re-solubilized in reverse PEG concentration gradients. This procedure improved the integrity of both TVCVPA and the wild-type subgroup 3 tobamovirus. TVCVPA could be loaded with more than 500 IgGs per virion, which mediated the immunocapture of fluorescent dyes, GFP, and active enzymes. Bi-enzyme ensembles of cooperating glucose oxidase and horseradish peroxidase were tethered together on the TVCVPA carriers via a single antibody type, with one enzyme conjugated chemically to its Fc region, and the other one bound as a target, yielding synthetic multi-enzyme complexes. In microtiter plates, the TVCVPA-displayed sugar-sensing system possessed a considerably increased reusability upon repeated testing, compared to the IgG-bound enzyme pair in the absence of the virus. A high coverage of the viral adapters was also achieved on Ta2O5 sensor chip surfaces coated with a polyelectrolyte interlayer, as a prerequisite for durable TVCVPA-assisted electrochemical biosensing via modularly IgG-assembled sensor enzymes.
In this paper, the performance of different continuous-time and discrete-time models of the electrical subsystem of induction machines and permanent-magnet synchronous machines as well as methods based on them for decoupling the direct and
quadrature axis components of the stator current are investigated and compared. The focus here is on inverter-fed, pulse width modulated drives when operated with a relatively large product of stator frequency and sampling time, where significant
differences between the models and decoupling methods used come to light. Recommendations for a discrete-time model to be used uniformly in the future are made, as well as statements on whether feedforward or feedback decoupling structures are better suited and whether state controllers improve decoupling measures for very steep speed ramps. Simulation studies and measurement results support the statements made above.
Künstliche Intelligenz (KI) durchdringt unser Leben immer stärker. Studierende werden im Alltag und an Hochschulen zunehmend mit KI-Anwendungen konfrontiert. An der Hochschule Offenburg werden deshalb KI-bezogene Lehrangebote curricular verankert, um Studierende im Erwerb von KI-Kompetenz zu unterstützen.
Der Beitrag stellt ein Konzept für die Entwicklung von Lehrveranstaltungen nach der Idee des pädagogischen Makings zur Förderung von KI-Kompetenz in der Hochschullehre vor. Konkretisiert wird das Konzept anhand eines Moduls zum Thema Chatbots, dessen Lehrinhalte interdisziplinär aus verschiedenen Perspektiven ausgearbeitet werden.
This paper presents a framework for numerical building validation enhancement based on detailed building specifications from in-situ measurements and evidence-based validation assessment undertaken on a detached sustainable lightweight building in a semi-arid climate. The validation process has been undergone in a set of controlled experiments – a free-float period, and steady-state internal temperatures. The validation was conducted for a complete year with a 1-min time step for the hourly indoor temperature and the variable refrigerant flow (VRF) energy consumption. The initial baseline model was improved by three series of validation steps per three different field measurements including thermal transmittance, glazing thermal and optical properties, and airtightness. Then, the accurate and validated model was used for building energy efficiency assessment in 12 regions of Morocco. This study aims to assess the effect of accurate building characteristics values on the numerical model enhancement. The initial CV(RMSE) and NMBE have improved respectively from 14.58 % and −11.23 %–7.85 % and 1.86 % for the indoor temperature. Besides, from 31.17 % to 14.37 %–20.57 % and 9.77 % for energy consumption. The findings demonstrate that the lightweight construction with the use of a variable refrigerant flow system could be energy efficient in the southern regions of Morocco.
Entrepreneurial Leadership
(2023)
Die Medienbranche ist seit Jahren von disruptiven Veränderungen betroffen, sodass die Unternehmen und zentralen Akteure in einem dauerhaften Veränderungsmodus sind. Gestiegene Anforderungen an Führungskräfte, Kostendruck und geringe Zeitbudgets für Weiterbildung reduzieren die Möglichkeiten für umfassende Ausbildungsmöglichkeiten. Dieser Beitrag beschreibt einen Lösungsansatz, wie trotz begrenzter Budget- und Zeitressourcen eine individuelle Begleitung von Führungskräften möglich wird. Mit einer Kombination von stärkenorientierter Selbstreflexion und gezielten Impulsen werden Führungskräfte in ihrer Entwicklung als selbstverantwortliche, unternehmerisch denkende Führungskraft gestärkt.