600 Technik, Medizin, angewandte Wissenschaften
Refine
Document Type
Conference Type
- Konferenzartikel (8)
Is part of the Bibliography
- yes (15)
Keywords
- Götz von Berlichingen (3)
- Additive Manufacturing (2)
- Lightweight design (2)
- 3D-Druck (1)
- 3d print (1)
- 4D-Druck (1)
- 4D-Printing (1)
- Additive Fertigung (1)
- Additive Tooling (1)
- Additive manufacturing (1)
Institute
Open Access
- Open Access (7)
- Closed Access (4)
- Closed (3)
- Diamond (2)
- Bronze (1)
- Gold (1)
Plastics are used today in many areas of the automotive, aerospace and mechanical engineering industries due to their lightweight potential and ease of processing. Additive manufacturing is applied more and more frequently, as it offers a high degree of design freedom and eliminates the need for complex tools. However, the application of additively manufactured components made of plastics have so far been limited due to their comparatively low strength. For this reason, processes that offer additional reinforcement of the plastic matrix using fibers made of high-strength materials have been developed. However, these components represent a composite of different materials produced on the basis of fossil raw materials, which are difficult to recycle and generally not biodegradable.
Therefore, this paper will explore the potential for new composite materials whose matrix consists of a bio-based plastic. In this investigation, it is assumed that the matrix is reinforced with a fibrous material made of natural fiber to significantly increase the strength. This potential material should offer a lightweight yet strong structure and be biodegradable after use under controlled conditions. Therefore, the state of the art in the use of bio-based materials in 3D printing is first presented. In order to determine the economic boundary conditions, the growth potentials for bio-based materials are analyzed. Also, the recycling prospects for bio-based plastics will also be highlighted. The greenhouse gas emissions and land use to be expected when using bio-based materials are also estimated. Finally, the degradability of the composites is discussed.
In 4D printing an additively manufactured component is given the ability to change its shape or function under the influence of an external stimulus. To achieve this, special smart materials are used that are able to react to external stimuli in a specific way. So far, a number of different stimuli have already been investigated and initial applications have been impressively demonstrated, such as self-folding bodies and simple grippers. However, a methodical specification for the selection of the stimuli and their implementation was not yet in the foreground of the development.
The focus of this work is therefore to develop a methodical approach with which the technology of 4DP can be used in a solution- and application-oriented manner. The developed approach is based on the conventional design methodology for product development to solve given problems in a structured way. This method is extended by specific approaches under consideration of the 4D printing and smart materials.
To illustrate the developed method, it is implemented in practice using a problem definition in the form of an application example. In this example, which represents the recovery of an object from a difficult-to-access environment, the individual functions of positioning, gripping and extraction are implemented using 4D printing. The material extrusion process is used for additive manufacturing of all components of the example. Finally, the functions are successfully tested. The developed approach offers an innovative and methodical approach to systematically solve technical complex problems using 4DP and smart materials.
4D printing (4DP) is an evolutionary step of 3D printing, which includes the fourth dimension, in this case the time. In different time steps the printed structure shows different shapes, influenced by external stimuli like light, temperature, pH value, electric or magnetic field. The advantage of 4DP is the solution of technical problems without the need for complex internal energy supply via cables or pipes. Previous approaches to 4D printing with magnetoresponsive materials only use materials with limited usability (e.g. hydrogels) and complex programming during the manufacturing process (e.g. using magnets on the nozzle). The 4D printing using unmagnetized particles and the later magnetization allows the use of a standard 3D printer and has the advantage of being easily reproducible and relatively inexpensive for further application. Therefore, a magnetoresponsive feedstock filament is produced which shows elastic and magnetic properties. In a first step, pellets are produced by compounding polymer with magnetic particles. In a second step, those pellets are extruded in form of filament. This filament is printed using a conventional printing system for Material Extrusion (MEX-TRB/P). Various prototypes have been printed, deformed and magnetized, which is called programming. In comparison to shape memory polymers (SMP) the repeatability of the movement is better. The results show the possibilities of application and function of magnetoresponsive materials. In addition, an understanding of the behaviour of this novel material is achieved.
Additive manufacturing with plastics enables the production of lightweight and resilient components with a high degree of design freedom. In the low-cost sector, Material Extrusion as Fused Layer Modeling (FLM) has so far been the leading method, as it offers simple 3D printers and a variety of inexpensive 3D materials. However, printing times for 6FLM are very long and dimensional accuracy and surface finish are rather poor. Recently, new processes from the field of Vat Polymerization have appeared on the market, such as masked Stereolithography (mSLA), which offer a significant improvement in component quality and build speed at equally favorable machine costs.
This paper therefore analyzes the technical and economic capabilities of the two competing additive processes. For this purpose, the achievable dimensional and surface qualities are determined using a test specimen which represents various important geometry elements. In addition, the machine and material costs are determined and compared with each other. Finally, the resulting environmental impact is determined in the form of the CO2 footprint. In order to optimize the strength of the printed components, material properties of the tensile specimens produced additively with mSLA are determined. The use of ABS-like resins will also be investigated to determine optimal processing settings.
This paper presents a method for supporting the application of Additive Tooling (AT)-based validation environments in integrated product development. Based on a case study, relevant process steps, activities and possible barriers in the realisation of an injection-moulded product are identified and analysed. The aim of the method is to support the target-oriented application of Additive Tooling to obtain physical prototypes at an early stage and to shorten validation cycles.
The integration of additive manufacturing processes into the teaching of students is an important prerequisite for the further dissemination of this new technology. In this context, the DfAM is of particular importance. For this reason, this paper presents an approach in which a connection is made between methodical product development and practical implementation by AM. Using a model racing car as an example, students independently develop significant improvements of particular assemblies. A final evaluation shows that the students have significantly improved their skills and competencies.
In the development of new vehicles, increasing customer comfort requirements and rising safety regulations often result in an increase in weight. Nevertheless, in order to be able to meet the demand for reduced fuel consumption, it is necessary within product development process to implement complex and filigree lightweight structures. This contribution therefore addresses the potential of generatively developed components for fiber-reinforced additive manufacturing (FRAM). Currently, several commercial systems for this application are available on the market. Therefore, a comparison of the systems is first made to determine a suitable system. Then, a highly stressed and safety-relevant chassis component of a race car is generatively designed and manufactured using FRAM. A matrix with short fiber reinforcement and additional long fiber reinforcement with carbon fibers is applied. Finally, tensile tests are carried out to check the mechanical properties. In addition, relevant properties such as weight and cost are obtained in order to be able to compare them with conventionally developed and manufactured components.
For some years now, additive manufacturing (AM) has offered an alternative to conventional manufacturing processes. The strengths of AM are primarily the rapid implementation of ideas into a usable product and the ability to produce geometrically complex shapes. It has also significantly advanced the lightweight design of products made of plastic. So far, the strength of printed components made of polymers is previously very limited.
Recently, new AM processes have become available that allow the embedding of short and also long fibers in polymer matrix. Thus, the manufacturing of components that provide a significant increase in strength becomes possible. In this way, both complex geometries and sophisticated applications can be implemented. This paper therefore investigates how this new technology can be implemented in product development, focusing on sports equipment. An extensive literature research shows that lightweight design plays a decisive role in sports equipment. In addition, the advantages of AM in terms of individualized products and low quantities can be fully exploited.
An example of this approach is the steering system for a seat sled used by paraplegic athletes in the Olympic discipline of Nordic paraskiing. A particular challenge here is the placement and alignment of the long carbon fibers within the polymer matrix and the verification of the strength by means of Finite-Element-Analysis (FEA). In addition, findings from bionics are used to optimize the lightweight design of the steering system. Using this example, it can be shown that the weight of the steering system can be drastically reduced compared to conventional manufacturing. At the same time, a number of parts can be saved through function integration and thus the manufacturing and assembly effort can be reduced significantly.
Wir haben die erste „Eiserne Hand“ des Götz von Berlichingen mit 3D-Computer-Aided Design rekonstruiert und über einen Multimaterial-3D-Drucker ausgedruckt. Dabei ließ sich feststellen, dass die 500 Jahre alte Technik keinesfalls veraltet ist: Das Innenleben der „Eisernen Hand“ ist ausgefeilter als bisher angenommen. Sie könnte sogar spannende Impulse für die Entwicklung neuer künstlicher Handprothesen liefern.
The visualization of heart rhythm disturbance and atrial fibrillation therapy allows the optimization of new cardiac catheter ablations. With the simulation software CST (Computer Simulation Technology, Darmstadt) electromagnetic and thermal simulations can be carried out to analyze and optimize different heart rhythm disturbance and cardiac catheters for pulmonary vein isolation. Another form of visualization is provided by haptic, three-dimensional print models. These models can be produced using an additive manufacturing method, such as a 3d printer. The aim of the study was to produce a 3d print of the Offenburg heart rhythm model with a representation of an atrial fibrillation ablation procedure to improve the visualization of simulation of cardiac catheter ablation. The basis of 3d printing was the Offenburg heart rhythm model and the associated simulation of cryoablation of the pulmonary vein. The thermal simulation shows the pulmonary vein isolation of the left inferior pulmonary vein with the cryoballoon catheter Arctic Front Advance™ from Medtronic. After running through the simulation, the thermal propagation during the procedure was shown in the form of different colors. The three-dimensional print models were constructed on the base of the described simulation in a CAD program. Four different 3d printers are available for this purpose in a rapid prototyping laboratory at the University of Applied Science Offenburg. Two different printing processes were used and a final print model with additional representation of the esophagus and internal esophagus catheter was also prepared for printing. With the help of the thermal simulation results and the subsequent evaluation, it was possible to draw a conclusion about the propagation of the cold emanating from the catheter in the myocardium and the surrounding tissue. It was measured that just 3 mm from the balloon surface into the myocardium the temperature dropped to 25 °C. The simulation model was printed using two 3d printing methods. Both methods, as well as the different printing materials offer different advantages and disadvantages. All relevant parts, especially the balloon catheter and the conduction, are realistically represented. Only the thermal propagation in the form of different colors is not shown on this model. Three-dimensional heart rhythm models as well as virtual simulations allow very clear visualization of complex cardiac rhythm therapy and atrial fibrillation treatment methods. The printed models can be used for optimization and demonstration of cryoballoon catheter ablation in patients with atrial fibrillation.